Это видео недоступно.
Сожалеем об этом.
Part 1 Flysky FS - i6S transmitter
HTML-код
- Опубликовано: 27 апр 2017
- The Flysky FS - i6S is a well made hobby grade budget transmitter and it comes with a receiver for $47!!!!! Touch screen!!!!
There are a lot of bnf versions of quadcopters that needs the receiver as well as a transmitter and the Flysky FS - i6S is a well qualified transmitter that will meet the need.
In this video, the Flysky FS - i6S transmitter is examined and the firmware is upgraded.
Flysky FS - i6S
goo.gl/2PCnTr
Flysky FS - I6
goo.gl/bwRmsD
jjrc jjpro goggles---ON SALE!!!
shrsl.com/?foau
may deals goo.gl/4EzsgA
flash deals at Gearbest goo.gl/76INeX
US market sales goo.gl/Ni0CZq
check out the RC cars shrsl.com/?hx0c
Toys and hobbies goo.gl/jlrkzl
new quadcopters goo.gl/cTnBLI
get the firmware updates here
goo.gl/posv2r
goo.gl/vMbgE8
Im just getting into the hobby thanks for the video definitely helped me
Hey, after looking for many videos that show exactly how to configure this controller, your video is just what I was looking for. Thank you very much !!!!!
Thumbs up. I was looking to verify that you need to land the copter to trim, and you answer the question right on.
thanks man :)
Fantastic review! That transmitter looks like the transmitter for my Phantom 3 advanced, including the buttons on the back. Too bad it doesn't have a place for a plugin module like the 4in1, but for the price, it's outstanding. Thanks for taking the time to go over the whole setup!
Thanks for checking it out :)
I just ordered this radio I plan on using it for a small tank chassis I hope it can be configured for both left and right throttles
hi buddy how you done i have same this radio FS 10ch i6s white
but can you tell how can adjust the alarm on my battery 3s when my 3s is weak the alarm is work she needs adjust from RX settings
high volteg.6.0
alarm.4.2
low.4.0
if you know tell me how thx pal nice video
Great topic, thanks👍
Hi! What is the problem with the spring throttle? Can I use this radio with whoops without making any hardware modification?
what is the difference between radio failsafe and what we set on the flight controller as failsafe?
same FS-i6X just tactil in plus
Thanks. I want to make a remote controlled puppet and have a plethora of channels to work with. This seems to be the one .
Basically a puppet riding a tricycle so I want tricycle control and puppet control
- Tricycle throttle
- Tricycle steering
- puppet eyes left/right
- puppet eyes up/down (upgrade)
- puppet LED eyes on/off (upgrade)
- camera eyes on/off (upgrade)
- puppet neck left/right
- puppet neck up/down. (upgrade)
- puppet mouth open/close
Thnx for a detailed one.
Very good. This radio (FS-i6S) is compatible with tiny whoop as the Eachine e013? Thankful.
Fs i6s supports s-bus, i-bus, ppm, pwm, c-ppm or not?
Because i want to buy pixhawk flight controller & it works on c-ppm and s bus...
What if I want to change the comoany logo and other settings on LCD to use for one of my project. How will I do that?
I have a i6s 10ch TX but the receiver is 6ch. I want to use a retractable landing gear and 2Axis Gimbal in my quad, should i do all these controls with 6ch receiver or should i upgrade my Rx with 10ch?
Thanks for your review. However, one thing I find missing from almost all reviews, is compatibility. Correct me if I'm wrong, but I believe this receiver works on the inverted signal, so is not compatible with none inverted FC. I bought a couple of F3 and F4 FC, only to find them not compatible with my receivers, so now I have ordered this one. Hope future reviews will take this into account.
In never had a problem with receiver on my FlySky F3 or F4
great video , can you please tell me if you can use the back switches as channels ?
The RX voltage will be the boards 5v displayed and will remain the same whats the use of that please?
Thanks for your reply
How do i now what drones i can controll with this controller? I have the tarantula x6? will it work?
Oliver Ya boii no
thanks for the video it helped me a lot
DO THIS TRANSMITTER WORKS ON HELI LIKE THE BLADE CX 2 0R 3
Nice looking radio 👍. Dod.
Dod Rc
Thanks buddy :)
Great review!! Will check out part 2 :)
Thanks Alan :)
Very nice video
really like your reviews, always very informative! I'd like to make the step up from toy to hobby grade quadcopters, but I'm a bit intimidated it seems to be a very steep learning curve ? all the terms, abreviations software, hardware ? did you just jump in & learn while you go? hope you don't mind the question? have a good weekend!
Thanks :)
I have also just recently jumped into hobby grade quads from the toy grade rtf to the hobby grade bnf, pnp and arf quads and it does have a learning curve but it is far more rewarding :)
Thanks for great video. Do you know why when I go to sticks adjust I can't return to the other screen?. I have to power off.
Mine does the same.
Hi ..can you use one on a tamiya truck and how please thanks
ruclips.net/video/8spV9teOVTg/видео.html
use a flysky receiver.
Good imfomative video.Can I use for ground rc model like truck n other rc ground model?thank u
I haven't tried but I don't see why not if you use their receiver :)
I finished building my first racing drone. I took it out for a test flight an spun in the air like a top. I switch the blades around and then it just flipped over any ideas on what im doing wrong
you either need to check all of your props and make sure they are in the correct way and you need to check to see if your flight controller has the correct board alignment.
Great review. Many thanks. ...
Glad it was helpful!
Trim without physical switches is very hard to adjust while one need to keep the Quad flying steady.
Looks like the FS-i6S only support AFHDS 2A and is not compatible with the older AFHDS, correct?
abghere
Yes, you will have to land it and trim it and see if it is level. Imagine fixed wings :0
Yes, this transmitter does not have a switch for afhds and is fixed on afhds2a.
whitch gimbal the most smooth when in use? I6 or I6s??
I recently purchased the lanchi bluebired 80mm(brushed) that you reviewed (great review btw). Im curious to kno if it will bind to the Flysky I6S. I kno it binds to the 6 and 6X. But the I6S does not have backward compatibility to still bind with AFHDS. Im aware that the bluebird is AFHDS 2A and that it should bind with no issues. Ive just been seeing issues on line as of late and was curious if you had any info or have already tried it. Thx as always...
Thanks :)
It should bind since it is afhds2a :)
I now have it bound to my jumper remote and it is awesome :)👍👍👍
Great info. New to all this. Can I connect to Mac and use simulators so that I can start by practicing without damaging quad or persons?
I'm sure you can. there are lots of videos on youtube showing how.
does it have a heli program?
Was considering it till I saw how it trims how awkward. I like to trim as I fly.
Thanku sir
Is it possible connecting r9m to the i6s like the i6x.
These are flysky protocol and does not have the frsky protocol built into them.
@@RCEscape i know. There's people doing that
great job
Artur Skrzypczyk
Thank you very much :)
I have the FS-i6X and the FS-T6 and like them so much I sold my brand new Taranis to my mate.
lots of differerent Recievers from 3chan ones I use in my cars to the bigger ones I use in quads and they sold everywhere
and are real cheap and the transmitters have all the features I need plus they are cheap too, i'm not worried about putting
a FlySky transmitter on the ground or scratching it but i had to be so careful with my Taranis it had me worried all the time.
So I love FlySky and I know my way around the menus well so might have a look at this new one.
I might have missed it but is this compatible with both AFHDS and AFHDS 2A ?
I do not nave any afhds receivers to test but the product is only afhds 2a and there is not a switch like the fs i6 transmitter.
Ahh okay thank you that is good to know, I just watched your video of the king kong tiny 7 and bought one thinking i could use it with my FS-T6 then realised the RX in the tiny is 2A and my FS-T6 is 2 only, so I'm really glad I have the i6X :D
HI MEN.... AM THINKING ABOUT THIS RADIO OR THE SIMPLE ONE (THE BLACK) WITH OUT TOUCH SCREEN..... WHICH ONE DO YOU PREFER THIS ONE OR THE Flysky Fs I6 Radio .... THANKS MEN ... YOU ARE THE BEST
they are both good but the fsi6 has afhds and afhds 2A
This would be a great radio if it had proper trims. You want to dynamically trim while you're flying an airplane and that is not possible so it is a useless radio for planes
Why FS i6s is not connecting with FS R6B receiver?
protocols are not the same. AFHDS vs AFHDS2A
@@RCEscape whats the solution ? New receiver? Please suggest 6ch receiver compatibile I am not from electronics background just a guy who loves RC 🙃🙃
@@yashnivalkar1131
receivers are cheaper than the transmitters.
www.google.com/search?q=afhds2a+receivers&rlz=1C1CHBF_enUS846US846&oq=afhds2a+receivers&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIKCAEQABgKGBYYHjINCAIQABiGAxiABBiKBTINCAMQABiGAxiABBiKBTINCAQQABiGAxiABBiKBTINCAUQABiGAxiABBiKBTINCAYQABiGAxiABBiKBdIBCTc5NjFqMGoxNagCCLACAQ&sourceid=chrome&ie=UTF-8
plz can u make a video on aileon mixing with this transmitter. there is no video on this on entire youtube
ruclips.net/user/results?search_query=aileron+rudder+mixing
Thanks! very Informative.“
Thanks Pappy :)
i have every thang done with drone and cleanflight. every thang works.i got the hglrc 22o, batman drone.i cantest the motors every thang in order. how in the hell i start the motors to fly?please let me know thank you.
have you assigned switches for modes?
Oooff, that price nearly doubled on Gearbest
How range with et115 rx2a version??
Korean Dronian
I don’t have a rx2a receiver to test...sorry.
If you are accustomed to modes 1 and 3 of the control sticks, here you have presented (step by step) a way to swap the gimbals for the FS-i6S transmitter:
ruclips.net/video/7OANkv1rqaU/видео.html
How many mix can you add? Only one mix?
1988dirk 4 mixes
that goes with x6B?
does it use afhds2a protocol?
ja
Sir can you please tell me its maximum safe range in km...? please.......
it sucks. mine does 80 meters before it drops signal. i am very disapointed with this tx.
whitch gimbal the most smooth when in use? I6 or I6s??
they are both about the same
ok.. thankyou for info,,, :D
Hi, is this a good radio in your opinion?
Its good if you are a flysky person.
I've not used it since now I have the jumper remotes and I am mostly frsky.
can I do aileon mixing with this transmitter for rc planes
yup
how do we do this, can you tell us ?
I can't find the RX Bind option anyone else have the same? I can't connect it to cleanflight or betaflight either
nvm they moved it to the "system" menu part
is i6s better or i6x for drones and rc planes both plz answer I am in confusion
Universal Video
I don't have a i6x to compare...
You sell...?
which one is better
personally, I like the old one.
Your video is not even a month old but the price already jumped 42% from $47 in your description to $67 ???
did it really? that sucks!!!
yeah on GB but look around, maybe banggood has it for less. btw GB has the older FS I6 on sale i saw for $34. because FlySky rather you get the S or Xb now.
Excellent video - Big thumbs up !!! Visit us
Thanks feri :)
No trim on the fly- No DEAL! crash... or be so good at first maden settings that you correct after land! You cant set perfect trims on like wings flyer.. need your sliders trims:>(.. its a no deal for me! Kiss- keep it simple stupid! ..Trims please.
This video is not informative for a beginner. Voltages, timers for what? Take it out of the box to fly a quadcopter. This is what you do AND WHY!!!!!!!!!!!!!!!!!!!! assigning switched WTF what are you talking about> Modes- for what? How about I drive over this with my car?
Mine is coming in a couple of days. Did you find a good guide for setting it up and using it for the first time? If I find anything useful I'll post it in this message thread.
Did you find one? I'm just starting this and I'm completely lost. I built the quad and now I have no idea how to bind it. I got the new one from New Bee Drone
Too long man...