2004 Toyota Prado Key programming

How to program Toyota Prado standard key, remember to check frequency of the remote as there are a couple of different ones to chose from.
The process is easy once you have selected the correct key.
1. Open drivers door and leave open.
2. Key into the ignition & out twice. (listen to the key chime)
3. Close and open the door twice (Leaving open)
4. Key in and out the ignition once.
5. Close and open the door twice (Leaving open)
6. Put the key in the ignition and leave it in then close the door.
7. Turn the ignition on & off once to add remote or twice to delete remotes then remove the key. (Door locks will cycle)
8. Hold lock & Unlock buttons for around 2 - 3 second then release
9. Push unlock button (Locks will cycle again)
10. Turn ignition on and off to finish programming mode.

[@kamskm9090]

Hi, may you send me a link of that website SRS? I couldn't find it please?

[@JBCustomsKeysPerth]

Hi mate, it is a subscription based program which is run by SG Locks in Australia.