- Видео 74
- Просмотров 314 233
JB Customs&Keys
Австралия
Добавлен 4 июл 2021
JB Customs & Keys are here to help out and demonstrate via how-to videos, mechanical work, vehicle key repairs, changing key batteries & key cutting & key coding plus lots more.
We also hire out all the tools to perform maintenance jobs on our channel including OBD scanning tools to hire & specialist tooling. Please if you have any question just email us at sales@jbcustomsandkeys.com.au
We also hire out all the tools to perform maintenance jobs on our channel including OBD scanning tools to hire & specialist tooling. Please if you have any question just email us at sales@jbcustomsandkeys.com.au
Lexus LX570 Proximity key programming Autel IM680
How to program a new key for the Lexus LX570
#xhorse #autel #toyota #lexus #lexuslx570 #AutelIM608
#JBCustomsandkeys
#xhorse #autel #toyota #lexus #lexuslx570 #AutelIM608
#JBCustomsandkeys
Просмотров: 109
Видео
Kia Rio 2010 2017 UB Remote key programming Autel IM608 KEYDIY
Просмотров 5945 месяцев назад
How to program a KEYDIY remote key to a Kia Rio UB using the Autel IM608 in less than 60 seconds. @kia @HyundaiMotorGroup @keydiymedia @technolock @xhorseglobal6862
Holden Cruze Proximity Key Programming Autel IM608
Просмотров 1185 месяцев назад
How to program a new proximity key to a Holden Cruze using an original key and the Autel IM608
Nissan Xtrail Boot Trunk won't open repair
Просмотров 2,7 тыс.5 месяцев назад
How to repair a broken trunk / boot opening switch.
Subaru Outback rear wheel bearings
Просмотров 326 месяцев назад
Remove & install two new wheel bearing hubs on a Subaru Outback in less than an hour. Torque Spec Wheel nuts 89 ft lbs Wheel bearing bolts 47.9 ft lbs Axle nuts 177 ft lbs Brake caliper bracket 47.9 ft lbs Brake caliper 19 ft lbs
Hyundai i30 PD 2017 2019 Key programming
Просмотров 6856 месяцев назад
Programming a Hyundai i30 PD key using the Xhorse Key tool max & the Xtool Pad3
Kia Rio UB 2010 2016 Clutch Master Cylinder replacement
Просмотров 1,6 тыс.6 месяцев назад
Changing the Master clutch cylinder on at Kia Rio UB, very easy and all you need is 13mm spanner or socket & Pliers to remove the master cylinder and a 10mm spanner to bleed the slave cylinder.
Holden Commodore VE Key Programming
Просмотров 1,7 тыс.6 месяцев назад
How to clone a VE transponder using Xhorse superchip & program the KEYDIY remote with Autel in less than 10 minutes.
Toyota FJ Cruiser remote programming KEYDIY
Просмотров 1,2 тыс.7 месяцев назад
Ensure the doors are unlocked, the driver’s door is open and the key is not in the ignition. 1. Within 5 seconds insert and remove the key from the ignition twice. 2. Within 40 seconds close and open the driver’s door twice. 3. Insert and remove the key from ignition. 4. Within 40 seconds close and open the driver’s door twice. 5. Insert the key into ignition and close the driver’s door. 6. Wit...
Holden Colorado RC Remote programming Xhorse
Просмотров 1,4 тыс.7 месяцев назад
How to get a Holden Colorado in to programming mode and program a new remote in 1. Close all doors, 2. Open drivers door & insert the key into the ignition (DO NOT TURN ON) 3. Turn ignition ON-OFF, ON-OFF, ON-OFF (within 5 seconds) 4. Close then open the drivers door (Within 5 seconds) 5. Wait for 10 seconds 6. Turn the ignition ON-OFF 7. Wait around 3 second (Hazard lights will flash 3 times s...
Hyundai I30 GD 2014 - 2017 Key programming Xhorse and Autel
Просмотров 3997 месяцев назад
Hyundai I30 GD 2014 - 2017 Key programming Xhorse and Autel
Renault Clio 2012 2019 smart key programming IM608
Просмотров 1,7 тыс.7 месяцев назад
Just a short video on how to program a smart key for a 2012-2019 Renault Clio using a key from MK3.com and the Autel IM608 key programmer. Any questions please leave a comment or send me an email sales@jbcustomsandkeys.com.au
JB Customs VW Amarok Transponder Chip cloning Xhorse KD Max
Просмотров 1727 месяцев назад
How to clone a transponder chip on a VW Transponder using the Xhorse super chip and the KD Max, this will work on 95% of VW's Audi's, Seat's & Skoda's
JB Customs 2002 2006 Toyota Camry Remote programming
Просмотров 3367 месяцев назад
How to program a 2002 - 2006 Toyota Camry remote into you are. Remote Programming Steps. Insert a key in the ignition and turn from “OFF” to “ON” 3 times leaving it in the “ON” position (Security light should light up for 5 seconds.) Press the button on the new remote. Hazard lights should flash once to confirm acceptance of the new remote. Repeat step 2 with any additional remotes. Switch the ...
JB Customs VW Amarok Remote programming
Просмотров 5847 месяцев назад
Programming a VW Amarok remote using Keydiy keys and the Autel IM608. Please if you have any videos you would like to see email me at sales@jbcustomsandkeys.com.au We do hire OBD Diagnostics & key programming computers out please get in touch on the above email
Xhorse Keytool Max Toyota proximity key frequency
Просмотров 427 месяцев назад
Xhorse Keytool Max Toyota proximity key frequency
Mitsubishi Triton L200 Key programming
Просмотров 1,2 тыс.10 месяцев назад
Mitsubishi Triton L200 Key programming
2022 T6 1 Transporter how to fit Lowering springs
Просмотров 62810 месяцев назад
2022 T6 1 Transporter how to fit Lowering springs
Battery Parasitic Testing ( Battery Drain )
Просмотров 77Год назад
Battery Parasitic Testing ( Battery Drain )
JB Customs Nissan Navara D40 Key programming
Просмотров 2,3 тыс.Год назад
JB Customs Nissan Navara D40 Key programming
JB Customs Renault Kangoo key programming / OBD location
Просмотров 885Год назад
JB Customs Renault Kangoo key programming / OBD location
JB Customs Navara ST D40 All keys lost AKL
Просмотров 120Год назад
JB Customs Navara ST D40 All keys lost AKL
JB Customs Hyundai Getz not starting fuse blown
Просмотров 307Год назад
JB Customs Hyundai Getz not starting fuse blown
How do we know the right key for each car (Mercedes Benz)? Please advise.
Thanks
Can you program 2 keys for the same car?
It's not the M1 clamp my friend
Please where can I get those kits you used to set the variable timings?
Hi, I’ve got a problem: I lost the primary keys but I have the second original pair that however doesn’t have working buttons. I tried this putting the secondary keys and pressing the button on the keys but only the “Open” and “Open trunk” buttons work, while the one that closes the car doesn’t
How much would you charge to do this? Just this week i priced up a new key for my 2012 Amarok here in Australia because I only have one and I always like to have a spare, but for the key itself the VW dealership want $445 + $60 in freight from Germany then they say it will take an hour to an hour and a half to code it at the cost of an added $210. A total of $787 AUD for a new key and for it to be coded. Have you used any after market fobs and keys on the older Amaroks and do they work? Thanks in advance.
Worked thank you 🙌
Good
thank you, You help me very mutch
Thank you! Spent forever trying to figure out where the screws out were but turns out there's none
Good
Hey mate, great video. cheers. Got some questions: So it will only show green when you have less than 3 remotes stored in the system?? You cannot delete any remotes to programm it successfully?? It only works with MAP-remotes not with remotes which have the same transponder and remote frequenzy?? cheers
I have a 2011 FJ will this work?
What is the timing chain change interval? Do you know how many miles?
Thank you very useful
What website is that you use for key reference
Hi my boot is stuck closed, I have taken the panel off as you show but I can't see the lever to manually release the boot on mine? It's a 2008
There's a small arrow-shaped arm/button on the lock itself. That should open it from the inside
Thank you for the very informative video, doing it with the engine out looks easy, but it's not so easy when doing it in the car, I think I will need to take the car to a garage, I have to check the cost first 🥶
Is this the same procedure for an NX Pajero? 2017 model, NOT a Pajero Sport.
Nice work thanks for sharing, Chris
Do you need 1 working key for this to work? i.e If you have one key that for some reason no longer responds to the car can you recode it to your car without a separte working key?
🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️
Thanks. This Car Year please?😊
It seems when I do this, my new keyfob will lock and unlock door but if I try it in the ignition, I just get "immobiliser active"
Forgot to put on my seatbelt, now my garage doors opens when pressing the remote. Please send help
😂
But the old key doesn’t work
what if my old key fob is not working? i would'nt be able to do the last step "press any button on the old key fob"
Did you ever figured it out?
@@liorzummay i did'nt. I just use my old key fob, and bought a flip key fob in wich you put your old key fob circuit board, it is specific made for ford fiesta key fob circuit board so it will fit perfectly. i could'nt program another key fob to the car using this method.
Thank You for Your video!!!
"Promo sm" 💔
2009 Pontiac G8. Do I have to clone the new chip or can I do on board programming at the ignition without the handheld computers?
hey. Awesome video. I have a small question . Do you have to program the original key or you only need to program the new key?(does it erase the old keys when trying to program the new key?) Thank you
Hi mate, so if you just go to add key it will not erase the original, it will only erase the original if you do an all keys lost. I hope that's helpful mate.
Thank you very much. Have a good day
What year?.
It's from 2010 to 2016 mate.
Can you start the ignition with new key fob ? I couldn't
Hi there, this procedure is programming the remote, you need to also code the transponder in the key so that it will start.
Can I do this when changing the barrel with new keys?
Hi there, yes you can program the remote side of the key in using this method, you will also need to program the transponder side of the car so that it will start if they are brand new keys, or alternatively you can rebuild the new locks to suit your existing keys.
@@JBCustomsKeysPerth thanks mate!
👍
👌
not working for 2012 Ford Fiesta se :( Do you have to open the driver's door?
Hi mate, door needs to be closed. If this doesn't work then there is either a problem with the door switches on the car, the wrong remote frequency or the ignition switch not detecting the key in the ignition. Unlock the vehicle, enter from the driver’s side door and close the door. Fasten the driver’s side seat belt The following instructions will vary based on your vehicle model Ford Focus, Mondeo & Ranger Insert the key into the ignition and turn from the ‘OFF’ to ‘ACC’ position 4 times within 6 seconds - leave the key in the ‘OFF’ position after the final turn. (go to step 4) Ford Fiesta (Up to 2008), Cougar & KA Insert the key into the ignition and turn from the ‘OFF’ to ‘ON’ position 4 times within 6 seconds, leaving the key in the ‘OFF’ position after the final turn. ( go to step 4) Ford Fiesta (From to 2009) Insert the key into the ignition and turn from the ‘ACC’ to ‘ON’ position 4 times within 6 seconds, leaving the key in the ‘OFF’ position after the final turn. (go to step 4) 4. Press and hold any button on the existing remote for 2 seconds - A short beep will sound if successful. Repeat step 4. for all new remotes. Once all the remotes have been programmed, turn the ignition ‘ON’ then ‘OFF’ before removing the key from the ignition
Спасибо
👌
Can I just buy this key and program myself a spare? What do I need to buy and where do I buy it
Hi there, I can supply the key yes. You will have to have the blade cut and transponder programmed unfortunately, but you can do the remote yourself. Where are you located?
Hi, may you send me a link of that website SRS? I couldn't find it please?
Hi mate, it is a subscription based program which is run by SG Locks in Australia.
Спасибо
Thanks
Спасибо
Thanks for the support.
Спасибо
Thanks for the support.
Спасибо за видео и обьяснения
You are welcome, if there is anything else you would like to see please let me know. Please also check out my other RUclips channel, @JBCustomsRCCars
Does the crankshaft pin not have to go all the way in? Someone else had it go all the way in but I have mine set like yours with a bit sticking out.
Hi mate, as long it locks the crankshaft in position it doesn't matter. It depends which kit you buy as well the pins are longer and look like they stick out further.
It definitely matters, when it doesn't go in all the way it's because it's not fully lined up with the slot in the counterweight
If its not holding the crankshaft in the correct position the cam tools won't line up.
👍🏽
Thanks Inno.
Will this work on the RA7'S?
Hi there, what year is your RA?
Awesome
Thanks you.
Спасибо
Thanks again mate.