Heating a Garage With a Bitcoin Miner in 30° Minnesota. The S19J Pro ASIC.
HTML-код
- Опубликовано: 7 ноя 2022
- Can you heat your house with bitcoin mining? Yes you can, with the Fruits and Associates 3d Printed Shroud plus an S19 or S19J Pro, you can do it fairly quietly!
You may wonder if Bitcoin Mining at home is worth it - by using the heat that comes off the miners, it is...
We are using an 8" inline fan to replace the S19J's stock fans and make the ASIC Miner run quietly while producing around 3300 watts of heat!
LINKS TO THINGS:
The 3D Printed Shroud: amzn.to/3tfZ5iW (Discount code SPACEDW15)
Fan Spoofers / Fan Simulators: amzn.to/3EhH4pR
The AC Infinity 8" Fan: amzn.to/3tda38T
The Bigger Controller for that fan: amzn.to/3TmGufU
WHERE TO BUY Bitcoin MINERS: / discord Look for MUSK MINERS ASIC SALES (or email blake@muskminers.com and tell him you heard from me!)
Go see gorillasticker.com if you want decals for your car! 
Наука
Excellent video! I've been doing a lot of research on this very topic lately and I'm really glad that I found your video! Thank you so much for sharing! This was extremely helpful!
This is awesome! Been watching your videos and taking notes.
I have the new design shrouds on 3 of my S19's. I had to go check on them because there was no sound, like nothing was running at all. The new design is a great improvement.
It really is incredible just how quiet these help make this machine. Total game changer, ESPECIALLY in the winter when the heat is welcome.
Nic, awesome 👏 content as always! Now I see why you waited to make this video! BTW I worked with John on the design as well and the exhaust seal is required to keep all the hot air going out the ducking, at a few of my locations I got 20 BTC miners and in the summer I need just about 100% of the exhaust air pump to the outside, large leaks causes the mining room to get very hot when you got allot of miners in one area, so John if you reading this remember to keep the exhaust seal!
Ahhhhhh yes, that does make sense. I hadnt thought of larger scale mining farms in small areas in hot places.. I agree with you!
And yeah, I wanted to make this video in a cold place - I had planned on heating a whole three story house with a little cluster of miners in a basement; my brother lives in an old 1800's lake house up in Minnesota, but turned out they had NO extra amps on the circuit panel, so we went with a single miner in a garage.. But Im going to go back in december with a few S19's and see if I can make it feel like summer in there when its zero degrees outside!
@@SPACEDESIGNWAREHOUSE Nic you are awesome 👏 man, at my main house I also use a few S19’s for heating cheaper than oil or gas! Everyone should be doing this, but then again if everyone does my profits will keep going down lol, can’t wait for your next video! Truly different than everyone else even when you cover the same subject!
I was trying to get some work done, but noticed a new video had dropped. So I watched this instead. Now time to get back to work.
Haha, thanks Roger!
Where can I get these 3D printed shrouds? Amazon link says out of stock, thank you. Great video!
Fantastic! Makes me want to get a Bitcoin miner. If it's that quite it's a real option for home mining.
It really is that quiet! It changes the whole thing!
@@SPACEDESIGNWAREHOUSE that was the big reason for not buying one. We live in apartments here in Korea, my wife would kill me and the neighbors will also complain.
Al ver tu video me encanto la idea y compre el adaptador para mi Asic y la verdad que funciona de maravilla, pero tengo miedo que se rompa el AC INFINITY y al tener los Fake Fans la maquina no se pare y se queme, sabes si habría alguna manera de conseguir que al romperse o estar parado el AC INFINITY la maquina se pare como lo hace con los ventiladores originales?
This is going to be there future of all bitcoin mining
What is the overall length of everything put together please? Thanks
Do you know if this 3D printed parts would fit an S17?
you might as well take those small fans in the psu out , the will still spin because of the air being pulled through them and wear out maibe even start buzzing when the bearings fail on them
Thanks so much for another great and informative video. I immediately wanted to order the manifolds but the link on Amazon displays unavailable. Did I mess something up? Thanks again
Im asking him about it.. But here is the email address if the guy who makes them. I think Amazon is just slow, reach out and he'll get you taken care of! jfruits@fruits-us.com
@@SPACEDESIGNWAREHOUSE Thanks for your help! really appreciate it :)
How is the setup now, is it running well?
Nice Video man! Where do i find the fan spoofers?
If you go with the Fruits and Associates kit, it comes with spoofers! Otherwise, here: amzn.to/3TmuVp5
Please help! Is it possible to plug in the 8inch inline without removing the fans. If not, where can i get the chips to remove the fans. Noise is not a problem.
You COULD use it without unplugging the fans. The holes in the fans are the same spacing, but it would cause those fans to spin really really fast and I am not sure what that would do. Here’s a link to some fan spoofers amzn.to/3QXntDe
Great video ! Where else can I get the kit or the file to print it, there is no stock on Amazon :(
Yep! HASH VORTEX has them, use code "SDW" for my 10% off :). www.hashvortex.eu
Any idea where I can get just the intake shroud with the power supply cooling? I have all the parts otherwise and only want to upgrade the one piece. I've scoured ebay and amazon. Also does anyone know if a KA3 will fit the same as a S19J?
I would suggest just emailing Fruits.. jfruits@fruits-us.com.
whatsminer M30S 3d printed model???
Is there a way to make the fan shut off automatically when the miner is depowered?
I want to hook this up to a spa heater circuit. When the spa calls for heat, 220 is switched to the spa, then when the spa heater is done, 220 auto switches back to miner which heats the house. Possible?
Sure! The fan can run on 120 OR 240v! So however youre switching power away from the miner, have the fan hooked up to that same circuit and it will shut off with the miner
Any france shipping alternative ?
I bought 1. in the instructions you put a big warning about psu fans... what is the dangerous component that I must not touch??????
It’s only important if it was just running in the last few hours. But any bare metal other than the frame or a heat sink, or anything shaped like a tiny soda can, you’re going to want to steer clear of.
I'm just starting my journey down the mining road and am looking to heat my place in Alaska. My cost per kwh it .14c. What is the cost there where it is breaking even?
The price and profit is fluctuating all the time, but at 14 cents, you're still profitable! With an s19j 104 you're making +$2 a day - not bad for free heat plus profit... You can use the website asicminervalue.com to figure out profitability
I have a 3D printer, would you mind sharing the file so I can print it myself?
Thank you!
If you go to cryptocloaks.com, they have a file section for 3d printers
fucken awesome
Where to we purchase these product. In India Amazon not deliver,pls suggest. How to we buy these accessories.
They are listed on EBay as well. Dos that work? www.ebay.com/itm/234720014919?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vnYO4uxBTmu&sssrc=2051273&ssuid=vnYO4uxBTmu&var=&widget_ver=artemis&media=COPY
Your T-shirts are shrinking 😂
Hahaha I refuse to go up a size. I’m hitting the gym instead; slow progress :)
@@SPACEDESIGNWAREHOUSE haha same, i dropped 8kg in last 3 months, it can be done.😂
Will the new shroud for the S19 XP?
That is a good question! I don’t have any XPs and can not confirm it
Do you have one for Antminer S19K Pro?
It should be the same dimensions.
wish that shroud was still available ! anyone knows if they'll be back in stock someday ?
I bought my own 'high end' 3d printer and Im going to start printing my own shrouds that I will make available hopefully by next week!
@@SPACEDESIGNWAREHOUSE please do!! looking forward to it!
Amazon wont ship the Fruits & Associates shrouds to Canada. :(
Ugh, this is more evidence that I need to fire up my own 3D printer.
Try cryptocloaks.com
@@boilermaker4740 Fair enough- Im in New York for the next 7 days and then I will get home and start printing shrouds! set a reminder.
So it seems you like this infinity fan solution over the boxes?
Yes. I have determined this is the best mix of easy to install, smallest footprint, SUPER COOL temps, like immersion cooling temps.
I guess the box style might work better in a colder/wet environment
Jesus... keep driving... you're almost at Canada !!!! Let's heat my driveway with miners !!!!
Wait, aren't you above Seattle!? Thats just.... 35 more quick hours of driving!
Oh shit, wrong account.
Also, I have two miners that dont even run anymore because of electrical cost.. I might send one up to you to split profits.
Are you done shitcoining yet? 😂LOVE your bitcoin content! I have the S9 version of this heating my basement
Im pretty sure that yes, ESPECIALLY after FTX went down... The wild wild west needs to be tamed, and Bitcoin is, indeed, the way.. I apologize for 60% of the last year's videos :)
Just need to replace your forced air furnace with one of these bad boys.
not 100% sure but i think you would be better pulling air with your fan instead of pushing it. its harder to push air with restrictions but not as hurtful when your are pulling. its easy to test it, using the same maching with same condition at the same fan speed and comparing the chips temp.
Pulling the air rather than pushing would most likely be slightly better for airflow, and the tiniest bit better for cooling, BUT - it would mean forcing 130°f air through a plastic fan; heating up its bearings, heating up its electric motor, and just keeping it hot for ever. That would surely shorten the lifespan of the fan.
@@SPACEDESIGNWAREHOUSE Great arguement. I will swap all of ours to push instead of pull. Been using a similar setup with home printed shrouds and anything from HG power to AC infinity fans. Imo there's almost no difference between the two, and the HG power one is alot cheaper.
I have 500 cfm fan will do the job ?
Yes it will; you’ll just need some way to force all of the air from that fan into the miner box
@@SPACEDESIGNWAREHOUSE just ordered the shroud from crypto cloaks thanks
So many people who mine also have race cars 🤣
Haha, it’s important to niche down on RUclips!!:):)
Hey your promo code doesn’t work on amazon
Must have been a limited time thing. I’m so very sorry
Dang I’m ready to buy lol
@@Way2fast4ya dang! Well, when I get back from this trip in like 10 days Im firing up my own 3d printer for the first time and Im going to print shrouds and sell them for less :) But that's a little bit of a wait.
I’m next
There is no fans on the miner back
Correct, the big black fan on the front can move more than double the amount of air as all four stock fans combined. So you dont need them. The fans are what make the most noise on a bitcoin miner. We use fan spoofers to make the machine think there are fans on there and then we remove them.
@@SPACEDESIGNWAREHOUSE the fan simulators works on s19xp?
@@alessioteuz3082 yes, the XP uses the same fans as the rest of the S19s
watch out with the compressed air. There might be moisture in it. Moisture + electronics = not a great success.
Yep, we ran the fan for a few minutes without the miner power connected for that very reason; probably should have said that in the video.
I couldn’t believe how much dust came out of that thing!!
Always out of stock :(
I JUST checked before posting this and he had some in stock.. No way they got bought out this fast!!! Email John directly, jfruits@fruits-us.com and tell him you want one!!!