BMW X5 F15 Remove Front Fender for Windshield Washer Bottle or Pump Repair

Поделиться
HTML-код
  • Опубликовано: 4 окт 2024
  • BMW X5 F15 Windshield Washer Bottle or Pump Repair.
    How to remove the fender to access the washer system.
    Order the pop rivets now!

Комментарии • 47

  • @claudioalves1197
    @claudioalves1197 6 месяцев назад +2

    Thanks for the video. Taking apart half of the car for such a small component was the worst nightmare ever!

  • @stevenkam6636
    @stevenkam6636 Год назад +2

    Very helpful thank you. Now I have to remove the fender . Very detailed on the clips and pins and screws

  • @watchmanmichael2023
    @watchmanmichael2023 8 месяцев назад +1

    Great video thanx brother, I didn’t know i had a problem under the fender. I bought the car with windshield light not on when i drove off the lot.

  • @jim1013yyf
    @jim1013yyf 9 месяцев назад

    Very useful info! I just replaced the washer fluid pump yesterday following this video.
    One tip - the fender arch is nearly impossible to pry out from exterior, and you should NOT yank it with brute force since it might damage the tab on the plastic fender. So I loosened the two front tabs on the arch (as shown in this video) and that gave me enough space to remove the front fender liner. After the liner is removed, i was able to pry on the arch tabs from inside to release the arch. This is THE HARDEST step of the entire process 😂😂

    • @frazierpless8355
      @frazierpless8355  9 месяцев назад +1

      Thanks for the tip I will try that next time.

  • @davewallace9048
    @davewallace9048 7 дней назад

    Great video now I gotta do the job!! doing it for my neighbor?

  • @DriverDude100
    @DriverDude100 11 месяцев назад +2

    Great work. Thanks for the video.

  • @pabloe1983
    @pabloe1983 10 месяцев назад

    thanks for posting,now i have and idea where the waterwiper pomp are👍

  • @heribertoa.cabrera1597
    @heribertoa.cabrera1597 9 месяцев назад

    Excellent video! Thank you for taking the time to share sir!

  • @whiteopz
    @whiteopz 4 месяца назад

    Excellent video. Thank you.

  • @leslesbo4049
    @leslesbo4049 11 месяцев назад +1

    Great Video, Thank You

  • @frankquiros6797
    @frankquiros6797 27 дней назад

    Thank you buddy

  • @tp1189
    @tp1189 5 месяцев назад +1

    Thanks for the video

  • @caiaffa039
    @caiaffa039 2 месяца назад +1

    Great video

  • @jfonlinenow1
    @jfonlinenow1 10 месяцев назад +2

    It would sure be a great thing if somebody could just add longer tubes to the reservoir and mount those pumps in the engine bay where they are easily accessible.. I’m taking my X5 F15 back in for a second time for this. The first time they replaced the windshield washer pump but they didn’t do the headlight washer pump. Also, the rear washers only work for about 15 seconds right after the car is started. After that I get a low washer fluid warning and the rear washers quit working. Such a pain in the ass.

  • @schepler2
    @schepler2 2 месяца назад +1

    Thanks for posting I'm considering doing this myself. How long did it take you to complete the job?

    • @frazierpless8355
      @frazierpless8355  2 месяца назад

      Two days since I made a video :)

    • @schepler2
      @schepler2 2 месяца назад

      @@frazierpless8355 Wow, really? I guess that's why the BMW dealer wants to charge me $1,100 to replace the pump!

  • @nachogalindo4507
    @nachogalindo4507 5 месяцев назад

    AMAZING.. I have some pictures of the curve outter cover. Therefore you can realize how to remove it. Not knowing how it looks like, harder to remove it

  • @djfiro5463
    @djfiro5463 4 месяца назад

    Great video, quick question. How did you know which parts needed to be replaced? Therefore ordering said parts ahead of time

    • @frazierpless8355
      @frazierpless8355  4 месяца назад

      If the pumps work you could just order the seals but I’d replace it all

  • @rlcolwell
    @rlcolwell Год назад

    thanks for the xlnt video

  • @joshuaromero2732
    @joshuaromero2732 10 месяцев назад

    Awesome, mine started to leak and i never thought it would take so much work and i also have my valve covers leaking😳🙁time to get a porsche

    • @frazierpless8355
      @frazierpless8355  10 месяцев назад

      Just fix it. Just wait until the Porsche breaks!

    • @rayh9865
      @rayh9865 8 месяцев назад

      With the correct set of tools and some patience you can replace that valve cover yourself.

  • @richardmarshall6751
    @richardmarshall6751 2 месяца назад +2

    Very helpful video, but frankly just another reason to be furious at BMW. Might as well remove the engine to get to the leaky windshield washer system...... Frankly, I just want to swear and cuss, watching the degree of nonsense that you had to go through to get to the washer system. This is absurd, completely absurd. They couldn't have found a more accessible place for something that will certainly need service!?!? I need to walk away......count to "10"........ Unbelievable. Why do we continue to reward them by purchasing BMWs when they are so thoughtless towards their customers? Never again. Toyotas or bust.

    • @frazierpless8355
      @frazierpless8355  2 месяца назад

      No different on a Toyota, here's the procedure ruclips.net/video/n3PtKfQxrrg/видео.html

  • @normandy17
    @normandy17 11 месяцев назад +2

    A lot of damn labor for a washer pump, looks like a 2.5-3hr sitting.

  • @mike7243
    @mike7243 3 месяца назад +1

    This is my last BMW. Beautiful vehicle but the worst design ever. I took my X5 to a mechanic and they want $1300 to start could go higher should other parts need replacement. So at this point their guessing what part needs replacing. Hey BMW do better.

    • @richardmarshall6751
      @richardmarshall6751 2 месяца назад +1

      Spot on. This is so idiotic, to put a system that always needs attention after a few years behind a fender should be criminal. BMW should certainly not be rewarded for such thoughtless designs with new sales. It is an f'n windshield washer, literally a PE milk bottle with a fish tank pump on any other car design. Nooooo, the oh so clever krauts have to "integrate" the system into the wheel well. Wow, I'm impressed, up until the point I have to pay someone to fix it, or spend the weekend raising my blood pressure working on this teutonic nightmare!

    • @frazierpless8355
      @frazierpless8355  2 месяца назад +1

      This is actually one of the easier ones I've done on a modern car. They all are difficult since they are so large nowadays.

  • @Mike-ht1ou
    @Mike-ht1ou 2 месяца назад +1

    Thanks for the video and idiotic design by bmw

  • @buddyehlers2930
    @buddyehlers2930 Год назад +1

    'promosm'

  • @melvingrant5459
    @melvingrant5459 5 месяцев назад

    Great video