Stop for the lathe
HTML-код
- Опубликовано: 24 авг 2024
- My lathe originally came with a revolving stop - in it's original state - but when I got the lathe it wasn't included. I've missed having one, so I made one myself. It's modeled after the original one, but the final design sort of came out of the materials I had at hand.
I have had a big threaded rod for some time that I got for virtually no money. I haven't had any good ideas for it's usage so I simply decided to use it as raw material.
The alloy seems to be of high quality, but because of the "rolled on" thread it's also very hard in some places. I therefor experimented with HSS vs Carbide and ended up having to use my fly cutter a lot (that for now is the only Carbide-milling tool I have) as the material simply was to hard for HSS. I even went so far as to turn the last piece square on the lathe as it was a lot faster than milling it.
Again I want to apologize for the primitive video. I'm planning to make holders for my cameras and iPhone for future projects, so I can set them up in better ways. But for now you have to settle with "Dogme 95"-like videos ;)
nice to see just ONE person who does not drag the file back
Very nice work and FINALLY a machinist who didn't like to hear himself talk..
Very nicely done. Great finished product. Yes there are a few things that could have been done differently but who hasn't gotten through, or almost through a project and then realized they could have done this or that a bit differently. Nice attention to detail. Noticed how everything came out flush, the head of the threaded rod, the nut on the underside , etc.. Really enjoyed seeing an 'old timer ', manual machinist doing some creative work. Well done and congrats to you on a very well done video.
Simply admiring a craftsman. Great work.
Very nice
Some very good camera work as well
Beautiful work!
Neo7CNC Thanks!
i tip my hat. you sir are a fine machinist.
Beautiful work, and very steam-punk looking with those bolts.
Elegant, precise & imaginative, and that's just your English. The work is fantastic.
Great project as well as result/workmanship. Been thinking about making a stop for some time and now having seen this type has given me more (better) ideas for the project. Thanks for sharing and hello from Australia, John.
So delicate video that I almost fell asleep. Nice work!
I also like how you just worked and didn’t give meaningless info to fill the video. Well done
Such a good idea, I am going to steal it. As a newbie, I doubt if I could accomplish anything near the same level of craftmanship. But that is another good goal for me.
.
Now these are the videos I like no music just the sound of the machines cutting beautiful lol I’m a new subscriber and I’m going to enjoy the rest of your videos thanks for the hard graft you put in all the best god bless
The video is just fine. Thank you for showing us your work.
Coming from a 20+ year machinist, very nice craftsmanship. Keep up the good work.
Thank you very much!
That is a very interesting indexer, I never know how those worked. I think I'll try making one myself!
Great job, love the detail of adding the dent to it as well!
Excellent piece of work.
Very nice idea brother. I like it when I see a person using a file to chamfer a component and using protection plates between the chuck jaws and the job. I posted comment a few days ago on precisely what you did when setting up a square block in a four jaw chuck - using your center as a quick guide and then do fine adjustment with a lever type dial indicator. Nice work brother.
An excellent and very informative tutorial. I like the your film making style, and you got some really good pin sharp close up footage. I think a comentary would add a lot to the presentation.
Thank you
Stuart
That's some amazing manual machine work.
Greetings from California🇺🇸. Bravo, Master Machinist. What a wonderful workmanship, you got there. Great jobs, great precision, great accuracy, great patience, great concentration and great silence. I’m deeply sorry for the T shirt, though !😂 Thanks for the demonstration.
This was fascinating ...I did notice it looks like the man doing the work was not wearing protective eye wear.
+Leslie K We had a bit of discussion on safety with this video: ruclips.net/video/abTCaXBx7os/видео.html ;)
Excellent Precision Engineering & Great Video!!!
Wow that's a nice work shop. I enjoyed the video.
Awesome job man!! Don't worry too much about the production value, the content was gold. Thanks for taking the time to make the video!
Good job Hanson
I learned a lot from this video. Thank you for making and sharing it!!
No music no talking, thats perfect! You let your work talk instead. Good job sir!
Thanks for the great video, I just bought a lathe and watch as many videos as I can.
I'm from Brasil! Beautiful running very accurately. It's a dream to have these machines. Like a lot of handwork. Congratulations.
Thank you so much Mr. Hansen!!... Congratulations for your excelent work!... Best regards from Santiago de Chie, SouthAmerica!.. God bles you and your families and friends!
Bloody brilliant workmanship there mate
Beautifully done
Congratulations on your beautiful work! It seems so easy for a professional, it's really nice to see you working!
Excellent work amigo! Very creative! I too have some huge stud bolts that serve as stock. Thanks for sharing!
Gut gemacht, sehr schönes Teil. Well done, very beautiful piece.
I own a vintage Morini, and you sir are my today's hero :)
very nice work and on the fly Engineering!
Excelente trabajo, y cada día me afirmo mas, todos los días se aprende algo nuevo en esta profesión.
Niccccce!
Good video work - I like the sunlight-lit portions especially (nice drops of oil flying in the sun when you first indexed it :)
Bravo!
You have performed an excellent job.
absolut gute Arbeit. perfekt!
@Landrew0 For some reason I can't answer your comment. But thanks for the attempt to correct my broken english. Some of your points are valid and I'll make some changes to the text, but some are actually also incorrect - that much I know... ;o)
Søren Hansen
the structural strength as the Russians say - in case of nuclear war? Good performance high accuracy
Here is the what you intended to say, I think:
"My lathe originally came with a revolving stop - in it's original state - but when I got the lathe, it wasn't included. I miss not having one, so I made one myself. It's modeled after the original one, but the final design sort-of came out of the materials I had on-hand."
wow that is impressive. Thanks for posting..
Mycket snyggt arbete Sören!
Man blir sugen på att gå ut i garaget och svarva något när man ser videon :)
Fredrik Moberg Tak for det. Dejlig at kunne inspirere :)
Excellent work my man.
Amazing work, you are a very skilled man.
Robert Ritchie Thanks, just trying to do my best ;)
excellent work!
your a very clever bloke wonderful idea and machining
enjoyed very much and end result surprisingly good, when I realised the function, simple but great.
Great project. I would just have machine the head of the 5 bolt to have them very flat. But really great result.
Really nice work. Function and beauty.
Like that. Too bad not every lathe has this button.
very nice Søren (yeah i'm danish too) . i just got a lathe today so i'm learning.
Beautiful piece of work, much too nice for standard bolts.
I was looking for stop ideas for new lathe, this one seems pretty good job and design.
I love how you don't wear safety glasses! It's driving the safety trolls insane and they just can't help but comment. Love it!
Nardini lathes are top notch
+Arthur Johnson Yep, can't agree more ;o)
Excellent job!
Wow very nice job! A priceless aset to any lathe !
Really enjoyed watching that and a great tool to
Brilliant! Great video!
Ingenious. Beautiful work.
Virkelig pænt stykke arbejde, Søren! :-)
+Tony Lorentzen Tak!!
Excellent. Well laid out video. Thank you. Now I need one, too!!!
Sim palabras... solo debo decir EXCELENTE...
Very very nice!
Very very nice job that’s bob on 👍🏻
BEAUTIFUL!!!
Nice work Bud...
Vert nice. I must make one of these
Excellent work
Really Great Job ! like it ;-)
Excellent job
Cool!
nice job
nice work and video
Wow...that chuck stops very fast!
that is impressive
Soren,
Great vid, now I know how to fly cut a 70 degree Vee. Seeing you change the lathe chuck how about making a chuck board ? It's just a flat piece of wood with stops on the underside to keep it in place, you fit it over the bed when changing chucks - it you drop the chuck - they are heavy and oily ! It will protect the bed from damage. That a nice mill what make is it ?
Tony
Tony Ray Thanks.
I have considered make a board for the bed, but haven't come around to it. I'm not that afraid of dropping the chucks. The four jaw is quite heavy and I need a very firm and correct grip and have good mental and physical concentration to mount it at all, and I don't feel that I would ever drop it, but it can of course happen. Also there's hardly room for a board, as the chuck actually is almost too large for the lathe. If it hadn't been so inexpensive I would have chosen a smaller size.
The mill is a Christen A0. Actually kind of rare, from Switzerland, a tiny bit larger than the well known Deckel FP1 and is very nicely and precisely made: www.lathes.co.uk/christen/
Great Bro thanks more video upload please
Hi Søren,
I have a similar size/shape euro mill and I am really impressed on the cuts you are taking with yours! What make/type is your mill?
It seems that mine is fairly worn, I don't think I would feed comfortable fly cutting steel at these rates as you...
Thanks for the nice videos!
awesome :) very nice work thanks for sharing :)
Nice job 👍
Det ser godt ud. Fedt med en video, som inspirerer med, at lave et ordentlig stop. træls at undvære, når man først har vænnet sig til det
Great idea 👍
Nice work. Subbed.
Pretty cool!
Great job with the stop, but I can't help but think you need to turn those bolt heads down and face them off. Maybe drill a small hole in the bolt shaft to get a bar in for loosening them if required. Works perfectly as is but i was never good at leaving things well enough alone😬
Thanks, Shawn. I've had that comment a couple of times before ;o) As I've also answered earlier, they were meant as a temporary solution - haven't made other solutions than to turn the head convex , though. I simply doesn't use it often enough to make a more elegant solution, but it is really nice to have for the rare cases that I do use it ;)
When you need a stop they are sure nice to have. Your solution is much more elegant than mine so I should be taking my own suggestions to heart. : )
Brilliant
very nice !
nice job, but i'm going to comment on the use of those hex bolts :( it just cheapens it in appearance. all that work only to put hex bolts in .........sry for the complaint. i normally don't, but......yuk
+Frank Ruffolo As I've also commented before, they were meant as a temporary solution - must admit though that I haven't made other solutions than to turn the head convex ;)
lol
very good job
Very nicely done Soren, Curious as to where your family is from...Hansen I believe is English or Irish, but if I'm not mistaken Soren is Norwegian. I'm from the U.S. and always enjoy seeing the methods used by people from other countries.
dihskursivThanks.
I'm from Denmark and Hansen is very much a danish name; it's the third most common surname here. It simply means son of (hu)man. Norway used to be a part of Denmark and a lot of the history of Norway is in fact the history of Denmark. The largest part of " the viking era" for instance. The danish language - tiny as it is (spoken by only 6 mil people) - has actually delivered a very large amount of the basic words to the english language. All because of the celtic culture being diluted and pushed back by the danes - in early times because the danes had "superior" skills and later simply with violence (the vikings). These days the language influence goes the other way - and some things about it are quite interesting: Some of the words came from danish, have changed their meaning a bit, and are now a "new old" part of the danish language. ;)
thank you
well done