CNC Router Controllers Built Incorrectly (Volume 11)

This video is part 11 in the series of RUclips videos made from content from RUclipsrs explaining the facts incorrectly about DIY CNC builds, and components all novice enthusiasts should understand.
If you have questions, or require quotes please message me direct at [e-mail] or through my eBay store here. www.ebay.com/str/edealersdirect
Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/itm/132210265015
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/itm/133300288430
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/itm/143498883290
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/itm/144280353346
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/itm/144279518155
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/itm/143650166809
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/itm/134192466153
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/itm/134194961658
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/itm/132532331429
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/itm/133891676093
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/itm/133891673596
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/itm/132649829362
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/itm/142538105021
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/itm/133273996534
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/itm/131899174942
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/itm/133273998565
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/itm/145089695270
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/itm/145089698308
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/itm/145089706227
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/itm/144276695477
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology

[@grantballard4362]

Really glad i found your series, Vince. I started a build a few years ago with a frame and then just gathering components, but had a feeling there was more depth to the rabbit holes on the electrical side than the influencer videos would suggest. Excited to learn more from you and thanks again for sharing. Will be taking a look at your store as I decide how to connect everything.

[@corvetteguy50]

Hey Grant, thank you for your support, and kind words. I'm glad you enjoyed the series, and hope they help you avoid any pitfalls with your own system. Thank you,
Vince

[@viktorviktor5405]

This guy just got fried, thank you for the usefull info about the spindpe cable. Keep up the good work.

[@corvetteguy50]

Thank you for your support! I certainly will! Vince

[@cvicracer]

Top shelf series

[@corvetteguy50]

Thank you for your support. I really appreciate it! Vince

[@andydemin3105]

i just wish all the contentmakers would add more details and actually would talk less sweettalk to get you into buying crap that doesn't work straight out of the box, but this stuff is actually all what i have to work with in the (cheapo) build I got to from not working at all to get a stable system that will work for minimum 10 continous production hours

[@TouChA0]

Thanks

[@johnross3752]

Vince is correct... First class is cheaper in the long run!

[@corvetteguy50]

Johnm thank you as always for your support! Vince

[@PusSea]

Hello sir. Is DDCS v3 okay? Thanks

[@corvetteguy50]

Thank you for your support. I don't use, or have tested stand alone controllers, so due your homework before purchasing one. Thank you,
Vince

[@andydemin3105]

I actually saw this video a day ago and i couldn't stop laughing ... the BS

[@steve-martin-42]

A Bird Build (cheap, cheap, cheap)

[@corvetteguy50]

Thank you, sir, for your support. I really appreciate it! Vince

[@andydemin3105]

i just would ;ike to add this little fact....from when i received the cnc plasma cutter untill it actually cut the most 2inch by 2 inch square ... and a circle...48 hours of bullshit to get through

[@corvetteguy50]

Unfortunately, this happens all to frequently. Thank you for your support! Vince

[@andydemin3105]

@@corvetteguy50 this is a big rabbithole.... why the 27dollar card doesn't work.... because it's bullshit