Good videos! I’ve 2 Toto aquia toilets, both about 15 yrs old. Not a lot of issues but the fitting from the flush valve to the fill valve broke. Thanks for the videos and part numbers. Biggest problem were the toilet mounting nylon pieces which secure the base to the floor. The new pieces require drilling holes for the mounting screws rather then having a series of slots
Thanks for the great video. You helped me a lot! The height did not come near the push buttons? Used wooden paint stir stick pieces to level. Did not have channel lock to remove plastic nut. Used car oil filter tool to remove. Cheers🍻
The fill valve nut says "this side up" for easier removal. Whoever installed mine originally did it upside-down and it was a huge pain to remove because it's harder to grip.
Hi. I watched your video hoping to find the solution as your toilet tank is the same Toto MODEL ST 416M although mine has no separate overflow tube. Recently, to fix the constant water running into the bowl, i replaced the fill valve gasket. It didn’t solve the issue so I replaced the fill valve gasket. During these times, i closed and opened the pipe valve as needed. Now, no water leaking anymore. But when i fill the tank then flush the toilet the water pipe makes scary air-drilling noise. It stops when i close the water valve. Any idea how to fix this issue?
I have this model and it's newly installed in my new apartment. For some reason the water won't refill though despite being new and will only refill if I push on the green part and lean it in a certain direction. Any suggestions for this seemingly simple problem? Thanks
Has anyone ever had trouble getting the bolts off? I have an Aquia II, the bolts are phillips head and I can't get them to loosen. My bolt heads are also much flatter - the bolts in this video are raised. Any ideas?
I rotated the valve assembly about 45 deg to the right but it won't pull out. In addition, it loosened the base of the assemble, so now the toilet is leaking 10X as much. Is there a trick to rotating and removing the assembly or do I need to just smash it out with a hammer :-) ?
Did you watch the whole video? You have to remove the tank in order to replace the valve. Then it’s just the nut holding the valve on. Pretty straightforward.
Good videos! I’ve 2 Toto aquia toilets, both about 15 yrs old. Not a lot of issues but the fitting from the flush valve to the fill valve broke. Thanks for the videos and part numbers. Biggest problem were the toilet mounting nylon pieces which secure the base to the floor. The new pieces require drilling holes for the mounting screws rather then having a series of slots
Changed one today 👍that old gasket makes a mess
Thanks for the great video. You helped me a lot! The height did not come near the push buttons? Used wooden paint stir stick pieces to level. Did not have channel lock to remove plastic nut. Used car oil filter tool to remove. Cheers🍻
Thanks for making my day.
The fill valve nut says "this side up" for easier removal. Whoever installed mine originally did it upside-down and it was a huge pain to remove because it's harder to grip.
Hi. I watched your video hoping to find the solution as your toilet tank is the same Toto MODEL ST 416M although mine has no separate overflow tube. Recently, to fix the constant water running into the bowl, i replaced the fill valve gasket. It didn’t solve the issue so I replaced the fill valve gasket. During these times, i closed and opened the pipe valve as needed. Now, no water leaking anymore. But when i fill the tank then flush the toilet the water pipe makes scary air-drilling noise. It stops when i close the water valve. Any idea how to fix this issue?
I have an older model Aquia and I'm trying to update with the newer flush valve version and I can't find any instruction on it..
I have this model and it's newly installed in my new apartment. For some reason the water won't refill though despite being new and will only refill if I push on the green part and lean it in a certain direction. Any suggestions for this seemingly simple problem? Thanks
How do you change the flush valve in when the tank and seat are one piece?
Toto Aqua 1 piece toilet.
Good video but everyone can skip to 2:40
Has anyone ever had trouble getting the bolts off? I have an Aquia II, the bolts are phillips head and I can't get them to loosen. My bolt heads are also much flatter - the bolts in this video are raised. Any ideas?
I rotated the valve assembly about 45 deg to the right but it won't pull out. In addition, it loosened the base of the assemble, so now the toilet is leaking 10X as much. Is there a trick to rotating and removing the assembly or do I need to just smash it out with a hammer :-) ?
Did you watch the whole video? You have to remove the tank in order to replace the valve. Then it’s just the nut holding the valve on. Pretty straightforward.
Make tank dry with sponge...
I think it makes more sense to replace the toilet lol
Noat
Gooq