I purchased one about along ago. I’ve used as the flux core mig, and as an arc welder. It’s awesome. Simple to use, I would 100% purchase again and recommend to anyone.
I have 2 kids in welding school now. Would be perfect for them to get in some extra practice at the house. Thank you for showing this machine off for us.
I have one of those small flux core welders too, just from a different brand. They're amazing if you are just welding every now and then and don't want to spend a lot of money on a higher quality machine.
I have a 205DS-B welder. I wish they would provide "Exactly in Detail" instructions on how to set the welding amperage and the wire feed speed. I cannot find that information anywhere in the material I received. I was hoping there was a video post detailing those necessary settings. Great review of this 110V home unit.
At 65 .I finally am getn my shop together.my son is still home and we are starting work on the few project cars that I have been holding on to. Excited to order one of these welders .affordable is huge and good reviews
Pretty neat little machine! Have been looking at small welders for use in my little shop. I probably wouldn't use it much myself due to COPD, but my Nephews and Nieces would really get into it! Great video, and you have a new subscriber. Thanks.
I got this Flux 135 Pro for $110.00 after tax and to my door and could not be happier. I also have now used the Yes Welder Flux Wire and can say it is top notch. I would give this to my buddy he is using a Chicago Electric Welder and every time he he uses the Flux 135 he curses and say how nice it welds and how easy it is to setup compared to his Harbor Freight Black Box of Disappointment.
Hi, I am interested in learning to weld, great common sense video review! I hope to repair the rusted ornate railings on my front porch as well as fabricate my harley davidson sportster project exhaust system. Thanks for your videos!! Mark F, Trenton, New Jersey
Great video, I just got this welder didn’t get time to use it yet. Glad you told what setting you used so I have a starting point.Do you know if I can use a 3500W generator to power this unit? Thanks
A 110 machine would limit you on a lot of jobs I would go with a 220 machine. At the same time right now is about the worst time to start a welding business with how saturated the market is
I just subbed bro I 𝐥𝐨𝐯𝐞 how you get straight to business! I would turn my empty garage into a full home shop over time and would geatly appreciate being able to put this baby to work (mostly SMAW & FCAW) and maybe get into Lift Tig if necessary. Maybe I would be able to afford food AND a full tank of gas if I can successfully turn this into a side hustle (God willing) I 𝐋𝐎𝐕𝐄 welding and will definitely send all the update videos along the way 🙏 Either way keep up the good work and keep these videos coming Stay blessed bro 🫡
If I won, I would probably use it on.... EVERYTHING!!! lol I am addicted to welding... As a masonry contractor, I have little free time, and instead of being like everyone else and doing who knows what in their very limited free time that works in the Masonry trades.... I fabricate cool shiz and teach myself new techniques and taught myself two processes with no help, unfortunately, and spent the first year with the sticker on my helmet....smh..... lmao, my welds improved 1000% overnight... literally! lmao!!! I need a real multi-process welder to top out my collection of cheap inadequate machines that my low income can afford! God Bless!
@WashburnFabCo...Hey Josh Liked#4 N Subscribed, Boy I need a Yes Welder, I have never used fluxcore before, as I will be needing to make custom structual architectural brakets for a giant roof rafters and I am hoping that I will be able to create entrence gates as I have in the past... I always wanted to try tig!!! Love seeing feed by the iches, whahoo !!!
I'm looking at one of these. Can you please tell me what size breaker you are running? I have an old SEARS stick welder that keeps popping my breakers no matter what I do.
I’m pretty sure these are regular 20 or 30 amp. The reason the old sick welder keeps poping the breaker is because it’s a transformer style machine drawing more power at a lower amperage. New machines are inverters and use less powder to get to a higher amp
I purchased one about along ago. I’ve used as the flux core mig, and as an arc welder. It’s awesome. Simple to use, I would 100% purchase again and recommend to anyone.
Sweet!
I have 2 kids in welding school now. Would be perfect for them to get in some extra practice at the house. Thank you for showing this machine off for us.
No problem 🤙🏻
Finally someone with morals...a give away..yeah... great vid
Thanks bro
I have one of those small flux core welders too, just from a different brand. They're amazing if you are just welding every now and then and don't want to spend a lot of money on a higher quality machine.
I have a 205DS-B welder. I wish they would provide "Exactly in Detail" instructions on how to set the welding amperage and the wire feed speed. I cannot find that information anywhere in the material I received. I was hoping there was a video post detailing those necessary settings. Great review of this 110V home unit.
Just bought the 135 pro loving it so far trying to teach my self to weld
Hell yeah
Used this machine for my first welds. Happy so far!
Nice !
At 65 .I finally am getn my shop together.my son is still home and we are starting work on the few project cars that I have been holding on to. Excited to order one of these welders .affordable is huge and good reviews
Congratulations. Thank you! 👍🏻
Pretty neat little machine! Have been looking at small welders for use in my little shop. I probably wouldn't use it much myself due to COPD, but my Nephews and Nieces would really get into it! Great video, and you have a new subscriber. Thanks.
Sweet!
That pretty cool I would use it for light fab and welding at home.
🤙🏻
I got this Flux 135 Pro for $110.00 after tax and to my door and could not be happier. I also have now used the Yes Welder Flux Wire and can say it is top notch. I would give this to my buddy he is using a Chicago Electric Welder and every time he he uses the Flux 135 he curses and say how nice it welds and how easy it is to setup compared to his Harbor Freight Black Box of Disappointment.
Haha yeah I’m not a fan of harbor freight either. Good luck
Nice. Video.I just purchased this 135 pro. This will help me greatly. I was just balling up welds. Ill try your settings tomorrow.
How’s it go ?
I would use it to teach my grandchildren how to weld and build a dinosaur because they love dinosaurs 😊
Sweet
I've got some outdoor exercise equipment to weld up, I only know stick but would give flux core a try if I win.
I’d use it on my homestead and teach my brother in law how to weld with it.
Hi, I am interested in learning to weld, great common sense video review! I hope to repair the rusted ornate railings on my front porch as well as fabricate my harley davidson sportster project exhaust system. Thanks for your videos!!
Mark F, Trenton, New Jersey
hey Mark, Thanks! Good luck with your projects!
Great video, I just got this welder didn’t get time to use it yet. Glad you told what setting you used so I have a starting point.Do you know if I can use a 3500W generator to power this unit? Thanks
thanks! I know my dad ran his yeswelder 205 on 110 off his 3000 Honda last week.
Deciding between Yeswelder and Titanium. Thanks for your review. First time welder.
Yes welder all the way imo! No problem!
Does it come whit a chart on how to use depending on the metal thickness.
Usually all machines do!
Would you recommend using start a welding biz 🤷🤷
A 110 machine would limit you on a lot of jobs I would go with a 220 machine. At the same time right now is about the worst time to start a welding business with how saturated the market is
Looking to learn welding in my garage!
Sweet!
This looks pretty solid
I would use it to learn to weld
@@clintonmcvay perfect machine to learn on
So did it use Lincoln consumables?
yup
I would probably give the machine to one of my employees
Sweet!
I just subbed bro I 𝐥𝐨𝐯𝐞 how you get straight to business!
I would turn my empty garage into a full home shop over time and would geatly appreciate being able to put this baby to work (mostly SMAW & FCAW) and maybe get into Lift Tig if necessary. Maybe I would be able to afford food AND a full tank of gas if I can successfully turn this into a side hustle (God willing) I 𝐋𝐎𝐕𝐄 welding and will definitely send all the update videos along the way 🙏
Either way keep up the good work and keep these videos coming
Stay blessed bro 🫡
Thanks brotha you too! Sounds like we’re in the same boat. Welding work is dead in my area right now
Thanks 🙏🏼
Do I need gas to run TIG on this welder??
Yes you need gas to tig with any welder
If I won, I would probably use it on.... EVERYTHING!!! lol I am addicted to welding... As a masonry contractor, I have little free time, and instead of being like everyone else and doing who knows what in their very limited free time that works in the Masonry trades.... I fabricate cool shiz and teach myself new techniques and taught myself two processes with no help, unfortunately, and spent the first year with the sticker on my helmet....smh..... lmao, my welds improved 1000% overnight... literally! lmao!!! I need a real multi-process welder to top out my collection of cheap inadequate machines that my low income can afford! God Bless!
Haha nice! Good luck!
Sounds like a sticker on the mask is good cross training!!!
these little devices are super handy for DIY. Only problem is that most wire is single-pass.
Yup that is true
I'm just starting a new project 69 ford would enjoy a better welder than the old Lincoln I got
Nice!
I would carry it with me in the work.
Nice
How do you enter for giveaway ?
You just did by commenting!
Yeswelder sir welder
I have a part time welding and fabrication business
farm projects
Start doing side jobs
Sweet
@WashburnFabCo...Hey Josh Liked#4 N Subscribed, Boy I need a Yes Welder, I have never used fluxcore before, as I will be needing to make custom structual architectural brakets for a giant roof rafters and I am hoping that I will be able to create entrence gates as I have in the past... I always wanted to try tig!!! Love seeing feed by the iches, whahoo !!!
Sweet! Thanks. Good luck on your projects
@@washburnfabco Please enter me into the drawing and good luck to everyone !!!
I'm looking at one of these. Can you please tell me what size breaker you are running? I have an old SEARS stick welder that keeps popping my breakers no matter what I do.
I’m pretty sure these are regular 20 or 30 amp. The reason the old sick welder keeps poping the breaker is because it’s a transformer style machine drawing more power at a lower amperage. New machines are inverters and use less powder to get to a higher amp