Yeah that blue is one of my favorite colors. It's Plasti-Dip so you could always do it and if you don't like it peal it off and go with the matte Black, which i think will look pretty dope as well. Lol. Let me know what u do. And thanks for watching!
I agree it is the cooler side, may change it later but for right now I dig the Jason Vibe. Lol. And sounds sweet! Shoot me a link when u do it I'd love to see it! & Thanks for watching!
Hey bro great video! Quick question, was it hard to paint over the little X O s textures from the inside? (Like did they showed white from the sides or got covered easily?)
I think you can, as I had about half a can left of each color. I'd still get a back up can in case u run short other wise it'll be tough to get the Plasti-Dip off. And if you don't use the second can u can always return it. Hope this helps. Thanks for watching!
One of my favorite color schemes too. That and the Miami Vice Blue and Pink. Lol. In the video it does but it in person the purples is even just looks weird on camera for some reason, but thanks to the stray Dog hair the Blue is for sure better. Lol. Thanks for watching!
I know the feeling. I was on the fence between Matt Black and what I did. I went with the two tone because I figured there'd be alot of Black ones so why not make it stand out? Lol. Thanks for watching!
Good question, it's not difficult at all find a corner and rub it till it peels up the corner and then gently pull it away like any regular decal. You can use a magic eraser for any areas with light coats of Plastidip. Hope this helps. Thanks for Watching!
I see what u mean. This is the best I can find. Every where else is in bulk 6 cans or more. Hope this helps. Thanks for watching. www.amazon.com/dp/B06XF1P38H/ref=cm_sw_r_cp_apa_glt_fabc_9RTHKQFAMM8S6C8T3FJD
can you still see the small playstation buttons on the inner panels? i don’t want it to look like third party plates and want to make sure i can still see every detail before i do it
Good question. The answer is not in the least. The plate side has tons of clearance built in so even with the coatings of PlastiDip they don't come close to touching at all. Hope this helps and thanks for watching!
@@heavyrain4485 it shouldn't, like I said I used alot of it. Lol. But if it does you can always either A. Peel off the Plasti-Dip, or B. Use an exacto Knife to cut it away. Hope this helps and thanks for watching!
Those were skins I got thru skinit.com. I'm actually changing those again. Got replacment trim (the black Part) on Amazon, so one will be Blue, the other will be Red, and the Blue will have a Japanese Wave painting skin on it, that actually covers more of the controller sides. I'll be posting videos here in the next few days on how to replace the trim. Thanks for watching.
I am planning on painting my all plum crazy but I was worried about the inside on the clips. Also I think it would be hard to get off one you put it on the inside. If I do end up messing up is there any recommended way to get the paint off?
Oh that sounds sweet, love that color. To answer your questions it didn't affect my clips at all. If your woried about taking it all off paint the entire thing front and back like I did on the front of mine and it will peal off like a giant vinyl. If you don't do that it will still come off but will need some work and alot of rubbing to get it off. Hope this helps. Send me pics or a vid when you do it I'd love to see how it comes out. And Thanks for watching.
I'm looking to create a PlayStation 1 design for my PS5. Do you have any recommendations for materials? I can't find the ideal plastidip. I also want to remove the plates from my dualsense, pulse headset and charging station to paint them too. Looking at getting classic PlayStation buttons.
You maybe able to do it with one, I say that because I have about a half a can of each left. I'd buy 2 to be safe, and if you don't need the 2nd one just return it for a refund. Hope this helps. Thanks for watching.
That looks like turquoise for me wanting to paint turquoise on both plate ...the purple one kinda dull after and it's be removed so no worries right ..overall nice video
It's maybe possible. I had roughly a half a can if each left when I finished. I'd buy 2 in case, and return the second one if u don't use it. Hope this helps. Thanks for watching!
It's maybe possible. I had roughly a half a can of each left when I finished. I'd buy 2 in case, and return the second one if u don't use it. Hope this helps. Thanks for watching!
What happens if you spray the middle of the inside plates. I seen you sprayed the edges and left the middle alone, but I did sprayed the middle. Should I be concerned or is it ok?
You're good. Spraying the middle doesn't affect anything. I just don't plan on changing the color on my PS5 so there was no reason to waste the paint. If you plan on changing colors it's actually a good thing as its easier to peel it off later. No need for concern. Hope this helps. And thanks for watching!
Would I be able to mix 2 colours on one plate , I wanna try mix blue and black together and make a sort of dotted livery(also keep up the great work :)
No you don't it's not like regular paint what it becomes is a vynil coat which can be pealed of later easily. Sanding it would destroy it. Hope this helps. Thanks for watching.
If you mean is one enough for both plates? Then yes it's possible one can, can be enough. Just don't be wasteful and watch your over spray to be safe. Hope this helps. Thanks for watching!
Vendo o resultado final, não parece que ficou muito homogêneo, talvez pela filmagem. Fiquei com medo de fazer e também ficar com a aparência de que foi pintado.
Gotcha. Well just aheads up incase you decide to customize it. Amazon has plates in Black, Silver, and gold. Definitely easier then Painting them. Thanks for watching.
I can only recommended to color the whole surface. Otherwise the plastidip will be very difficult to remove.
Thanks for the recommendation, and Thanks for watching!
That aqua blue is lookin pretty sick. Originally I wanted to go for a stealth matte black look, but now u got me reconsidering lol.
Yeah that blue is one of my favorite colors. It's Plasti-Dip so you could always do it and if you don't like it peal it off and go with the matte Black, which i think will look pretty dope as well. Lol. Let me know what u do. And thanks for watching!
finally i found what i was looking for! Thank you
You're welcome! Thanks for watching!
The cyan side is awesome,purple is not bad but I prefer cyan more,I am going for metal black for my PS5
I agree it is the cooler side, may change it later but for right now I dig the Jason Vibe. Lol. And sounds sweet! Shoot me a link when u do it I'd love to see it! & Thanks for watching!
Hey bro great video! Quick question, was it hard to paint over the little X O s textures from the inside? (Like did they showed white from the sides or got covered easily?)
Its so beautifully done! Love form 🇸🇬
Do you think you can get away with using one can for both panels?
I think you can, as I had about half a can left of each color. I'd still get a back up can in case u run short other wise it'll be tough to get the Plasti-Dip off. And if you don't use the second can u can always return it. Hope this helps. Thanks for watching!
Finally, someone who knows HOW to paint. Nice. I’m doing mine stealth black tomorrow. Cheers
Thanks! And sounds Brilliant! Send me a pic or a link I'd love to see it! Thanks for watching!
That’s dope bro 😎
Thanks! And Thanks for watching!
Your PS5 came out really nice, I did a video of a custom ps5 as well but I did a red and black camo wrap
Nice! I'll have to check it out. Thanks for watching!
Neat! How many cans did u used for it ?
Thanks and 1 of each color. Thanks for watching!
I love the color scheme. Everything i have is the same colors. Blue seemed to come out better.
One of my favorite color schemes too. That and the Miami Vice Blue and Pink. Lol. In the video it does but it in person the purples is even just looks weird on camera for some reason, but thanks to the stray Dog hair the Blue is for sure better. Lol. Thanks for watching!
Man idk if I should do plum crazy or Matt black
I know the feeling. I was on the fence between Matt Black and what I did. I went with the two tone because I figured there'd be alot of Black ones so why not make it stand out? Lol. Thanks for watching!
Hello sir. I was wondering how difficuly is it to remove should I decide to do so? Thank you
Good question, it's not difficult at all find a corner and rub it till it peels up the corner and then gently pull it away like any regular decal. You can use a magic eraser for any areas with light coats of Plastidip. Hope this helps. Thanks for Watching!
I wanna do this but in like a metallic red color, do you where I can go to find that color cause I'm having trouble
I see what u mean. This is the best I can find. Every where else is in bulk 6 cans or more. Hope this helps. Thanks for watching.
www.amazon.com/dp/B06XF1P38H/ref=cm_sw_r_cp_apa_glt_fabc_9RTHKQFAMM8S6C8T3FJD
can you still see the small playstation buttons on the inner panels? i don’t want it to look like third party plates and want to make sure i can still see every detail before i do it
I can see it on mine hope this helps. Thanks for watching.
Does spraying over the disk slot affect your disks afterwards?
Good question. The answer is not in the least. The plate side has tons of clearance built in so even with the coatings of PlastiDip they don't come close to touching at all. Hope this helps and thanks for watching!
@@Mdevlspawn01 If it does then what will happened?
@@heavyrain4485 it shouldn't, like I said I used alot of it. Lol. But if it does you can always either A. Peel off the Plasti-Dip, or B. Use an exacto Knife to cut it away. Hope this helps and thanks for watching!
hey bro, how did you modify the DualSense controller colors? Are those skins? Did you Plasti Dip those too?
Those were skins I got thru skinit.com. I'm actually changing those again. Got replacment trim (the black Part) on Amazon, so one will be Blue, the other will be Red, and the Blue will have a Japanese Wave painting skin on it, that actually covers more of the controller sides. I'll be posting videos here in the next few days on how to replace the trim. Thanks for watching.
I am planning on painting my all plum crazy but I was worried about the inside on the clips. Also I think it would be hard to get off one you put it on the inside. If I do end up messing up is there any recommended way to get the paint off?
Oh that sounds sweet, love that color. To answer your questions it didn't affect my clips at all. If your woried about taking it all off paint the entire thing front and back like I did on the front of mine and it will peal off like a giant vinyl. If you don't do that it will still come off but will need some work and alot of rubbing to get it off. Hope this helps. Send me pics or a vid when you do it I'd love to see how it comes out. And Thanks for watching.
Had any issues with the ps5 getting hot and affecting the plastic coating eg melting the coating?
Nope not a single issue. Been over 2 years now and no melting or running. Thanks for watching.
is one can enough for all the coats?
For one side it is not sure about both sides though. I'd probably get 1 can for each side.. Thanks for watching.
I'm looking to create a PlayStation 1 design for my PS5. Do you have any recommendations for materials? I can't find the ideal plastidip. I also want to remove the plates from my dualsense, pulse headset and charging station to paint them too. Looking at getting classic PlayStation buttons.
How many cans if you do 1 color?
You maybe able to do it with one, I say that because I have about a half a can of each left. I'd buy 2 to be safe, and if you don't need the 2nd one just return it for a refund. Hope this helps. Thanks for watching.
Nice! Where’d you buy the gun for the dip?
I got it at autozone, but they have em on Amazon for like 5 to 8 bucks. Thanks for watching!
PS5 has the DNA of a Dog😂Nice Colors,I hope to customize my PS5 one day
Thanks, and thanks for watching.
That looks like turquoise for me wanting to paint turquoise on both plate ...the purple one kinda dull after and it's be removed so no worries right ..overall nice video
Yeah if you use Plasti-Dip it peels right off like a vinyl sticker. Thanks, and Thanks for watching!
You think I can do both panels with 1 can?
It's maybe possible. I had roughly a half a can if each left when I finished. I'd buy 2 in case, and return the second one if u don't use it. Hope this helps. Thanks for watching!
So can we get a video on that nice saltwater fish tank man 😀😀😀😀😀
Can you do this process with your ps5 with one can of plasti dip?
It's maybe possible. I had roughly a half a can of each left when I finished. I'd buy 2 in case, and return the second one if u don't use it. Hope this helps. Thanks for watching!
@@Mdevlspawn01 thanks for the info👍
@@kryptonian5416 you're welcome!
What happens if you spray the middle of the inside plates. I seen you sprayed the edges and left the middle alone, but I did sprayed the middle. Should I be concerned or is it ok?
You're good. Spraying the middle doesn't affect anything. I just don't plan on changing the color on my PS5 so there was no reason to waste the paint. If you plan on changing colors it's actually a good thing as its easier to peel it off later. No need for concern. Hope this helps. And thanks for watching!
@@Mdevlspawn01 thanks a lot!!
You're welcome!
BTW what colors did you paint yours?
@@Mdevlspawn01 I did a royal blue! I’m letting it sit overnight then doing another coat tomorrow morning then it’ll be done!
Would I be able to mix 2 colours on one plate , I wanna try mix blue and black together and make a sort of dotted livery(also keep up the great work :)
I don't see why not it works like regular paint. And thanks!
That's an awesome color combo, but you definitely need a few more coats on the purple side.
Thanks, and thanks for watching.
This drove my OCD nuts not coloring the entire inside serface it's going to make that plastidip hard to remove in the future.
do u need to sand
No you don't it's not like regular paint what it becomes is a vynil coat which can be pealed of later easily. Sanding it would destroy it. Hope this helps. Thanks for watching.
Is one enough?
If you mean is one enough for both plates? Then yes it's possible one can, can be enough. Just don't be wasteful and watch your over spray to be safe. Hope this helps. Thanks for watching!
also Charlotte Hornets colors
Nice didn't even think of that! Thanks for watching!
mine as well have done the entire plates easy removal look good tho
Nice what colors did u do? Send pics I'd love to see it.
sony releases faceplates tomorrow lol.
Yes they do, and they even have a similar Blue & purple coming out. Thanks for watching! Don't forget to Like and subscribe!
Vendo o resultado final, não parece que ficou muito homogêneo, talvez pela filmagem. Fiquei com medo de fazer e também ficar com a aparência de que foi pintado.
horrible!!!
Sorry you feel that way. What's your PS5 look like? Thanks for watching.
Total black, Silver or gold..
Oh so u haven't customized urs yet? Are those the colors it will be? Just curious since u said "or".
@@Mdevlspawn01 i dont have customize it and i dont know if i will customize it in the future...
Gotcha. Well just aheads up incase you decide to customize it. Amazon has plates in Black, Silver, and gold. Definitely easier then Painting them. Thanks for watching.