Thanks for the review.Looks pink to me. Its a 2006 1960kv motor. Axis Flying always omits one of the zero's in the motor naming, so 206 is 2006. Same motor used for the C35V2
If you look at the sliders, they wouldn't be set to 1.0,if they are all at 1.0 they've not been set, anything else and they have, they are greyed out just because of settings.
@@squaddingquadsIf nothing else I've learnt so much configurating this. I really do appreciate your help. I have sent you a picture of pids by email and if they are OK I'm done I think but I'm not 100% they're right.
Firstly how did you get the o3 cable in ? Did you need to remove the Aio ? Surely you cannot open the hinge once that cable is in ? Secondly you can't configure in betaflight so where do I do it ? I know you said in the video but can you link me please. Lastly I just cut off the yellow cable for sbus to use the elrs, correct ?
@FlydroneFilms Thanks for your comment! Just a couple of tips to help you out: 1️⃣ Make sure you're not using a short O3 cable-it’ll make installation much harder. The best way to fit it is: - Open the hinge carefully (remove the LED cable first to avoid accidentally pulling it off). - Plug the O3 cable into the flight controller first (no need to remove the FC), then into the O3 unit. - With your "third hand," lower the hinge, align the O3 unit with the holes, and screw it down. Don’t forget to connect the antenna cables to the frame before securing the O3. The longer your O3 cable, the easier this process becomes! 2️⃣ To set up **Betaflight 4.6**, visit [www.app.betaflight.com](www.app.betaflight.com) using Chrome or Edge. This is the web-based version of Betaflight that supports 4.6 and works with Configurator 11.0. 3️⃣ If you’re using **ELRS**, you can remove the yellow wire, but personally, I just cut it, separated it, and left it-it’s easier that way. If you run into any more issues, feel free to drop another comment, and I’ll do my best to help you out. Once everything’s set up, you’re going to love it-it’s absolutely worth the effort! 🚁🔥
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Что случилось с Амелией Эрхарт на самом деле? [Veritasium]](/img/1.gif)
Looks superb! Great all rounder! 💯
@@BMFPV Just a fun little Cinewhoop mate for sure
Thanks for the review.Looks pink to me. Its a 2006 1960kv motor. Axis Flying always omits one of the zero's in the motor naming, so 206 is 2006. Same motor used for the C35V2
Ahhh great thanks for the info, I need better calipers :)
Okay this is freaking cool, No way should it fly like that, I love how everything is protected from smashing against that tree too.
It shocked me too mate
Loving this quad bro
Super impressive isn't it brother
Should the pids be set up for me they are greyed out and say they could cause a flyaway or be dangerous or something simlar ?
If you look at the sliders, they wouldn't be set to 1.0,if they are all at 1.0 they've not been set, anything else and they have, they are greyed out just because of settings.
@@squaddingquadsIf nothing else I've learnt so much configurating this. I really do appreciate your help. I have sent you a picture of pids by email and if they are OK I'm done I think but I'm not 100% they're right.
@FlydroneFilms no problem, I'll check when I'm back later
Hola de cuánto es la LIPO con la que se pesó? gracias
220g
bought the woopfly16. Not the kit. FC blew up can any 1s brushless FC fit. Thinking of matrix 1S 5in1 bored can you give me advice please
What advice you looking for buddy?
Can fit moonlight?
Physically yes, but I'm unsure if you can get longer mipi cables for it? The standard length one would be an issue
Hi friend. What battery do u use for this C35 V3?
Cnhl Pizza 6s 1350mah
@@squaddingquads What do you think about 1500mah?!
@tomzero61 6s?, should be fine
@@squaddingquads Yeah, I bought 6s 1500mah 120/240. I hope be good for this C35 V3.
Looks pink
So far everyone I've showed said pink 🔥✨
@@squaddingquads Before you even mentioned it I was like "I wonder why he picked pink"
I dont see a gps module .... betaflight will remove or grey out gps features if It doesn't detect a gps module.
@@FPV-TV419 the GPS is under the tpu print behind the camera and under the naked
@squaddingquads my bad... must have missed that bit 😅
To be fair I don't think I pointed it out, my bad
Firstly how did you get the o3 cable in ? Did you need to remove the Aio ? Surely you cannot open the hinge once that cable is in ?
Secondly you can't configure in betaflight so where do I do it ? I know you said in the video but can you link me please.
Lastly I just cut off the yellow cable for sbus to use the elrs, correct ?
@FlydroneFilms
Thanks for your comment! Just a couple of tips to help you out:
1️⃣ Make sure you're not using a short O3 cable-it’ll make installation much harder. The best way to fit it is:
- Open the hinge carefully (remove the LED cable first to avoid accidentally pulling it off).
- Plug the O3 cable into the flight controller first (no need to remove the FC), then into the O3 unit.
- With your "third hand," lower the hinge, align the O3 unit with the holes, and screw it down. Don’t forget to connect the antenna cables to the frame before securing the O3. The longer your O3 cable, the easier this process becomes!
2️⃣ To set up **Betaflight 4.6**, visit [www.app.betaflight.com](www.app.betaflight.com) using Chrome or Edge. This is the web-based version of Betaflight that supports 4.6 and works with Configurator 11.0.
3️⃣ If you’re using **ELRS**, you can remove the yellow wire, but personally, I just cut it, separated it, and left it-it’s easier that way.
If you run into any more issues, feel free to drop another comment, and I’ll do my best to help you out. Once everything’s set up, you’re going to love it-it’s absolutely worth the effort! 🚁🔥
Buy your own here.
axisflying.com/products/axisflying-c35-v3-fpv-frame-stack-motor-props-kit?DIST=RE5P