How to Stack Your Washer & Dryer - GE Ultrafresh - Complete DIY Demo
HTML-код
- Опубликовано: 30 июл 2024
- Join us as we re-configure our laundry room and transition from side-by-side to top-n-bottom washer and dryer. We have the GE Ultrafresh machines, and will use the Stack Bracket Kit GFA28KITN. It's really not that hard of a job. Enjoy the video and leave us your comments. Thank you!
Get your stack bracket kit here (paid link): amzn.to/3e4LX9a 
Хобби
Thanks for the great step by step video. Previous owner of our house had the vent go downward to the basement and then to the outside with a booster fan installed so there is no lint buildup issue.
Really good video, helped me a lot with stacking my units and getting the water line hooked up to the dryer, Thanks for posting...
Nancy is an awesome videographer. 🤩🤩🤩
Thank you, this was very helpful!
Thank you great job
Thank you for this video!
Excellen Video!!!!! He shows every step unlike most people!!!! I am very tall....and I laughed so hard at how high the controls are. Not this mans fault, but maybe manufacturers will learn to put controls on the bottom of the dryer. I actually think the wahser should go on top and then you just kind of drop wet, heavy laundry down to dryer.
Thanks! I’ve thought about how nice it would be to slide the wet clothing down into the dryer, but the washer spinning with clothing and water would be so dangerous on top of the dryer! Yikes!
There is a connection to make the washer control the dryer panel. It connects in the back.
Great video Sir, it really helped me a lot. Keep up the good work it saved me a lot of time not to have read the instructions, Thank you very much!!!!
Thanks!
@@fixthishouse3303 You're truly welcome! Can you do how to connect the same electric washer? I have a propane dryer and a electric washer both by GE.
Your Dalmatian is beautiful!
Thanks
Thank you for a great video! Quick question - does your dryer hang a smidge over the washer? We have what appears to be the same washer/dryer combo from Home Depot end of June. Bought the correct stacking kit etc. 5 months later, we are still redoing our laundry room - and we have realized that the 3rd party installation folks that Home Depot sent out - used the 34" brackets - they also left the washer packing braces on - it's been a mess and probably explains the uncontrollable shaking the washer would do when in use. My husband and I just restacked our machines w/the correct 32" brackets and it hangs over the washer a smidge. Probably something I just have to get used after it being done incorrectly for the last 5 months - but I just wanted to double check. Thanks so much!
Thanks for the note. Yes, it looks like there’s an overhang, but from the side profile, the front doors seem to be even. On ours, if you look where the side panel touches the front panel, the vertical lines on the 2 machines line up nicely. (I hope that make sense.) Other people have mentioned the packing brackets making a lot of noise, so hope fully you removed them.
You saved space for a ladder you will need to reach the dryer controls.
Lol, I know exactly what you mean! I step on an upside down old soap mold that is big enough to help me reach inside the dryer and short enough to allow the lower washing machine door to open. You bring up an excellent point though - that’s one of the “cons” to stacking the 2 units.
I was wondering how what’s the height .I only have like 79.5 inch in my basement ?
I just measured ours and it looks like 79”. Measure the height of each unit you own. The stacking kit looks like it adds 1”. I don’t know if it’ll work.
Hi, would you happen to know the washer/dryer model numbers? Looking at a GE combo and how this whole stacking setup works in regards to clearances. We have a closet space that's not much more than 32" deep, and a vent hookup opening on the back wall. I'm afraid these wont fit..is there any kind of clearance needed to run the dryer vent hose in particular? Surely if bends are needed, you'd have to account for maybe 6" of space right?
We have the 650 model. If you look at the online specifications (see link), you should be able to figure out how much space is needed. www.lowes.com/collections/GE-Profile-Ultra-Fresh-Vent-System-5-3-cu-ft-Stackable-Front-Load-Washer-and-Electric-Steam-Dryer-Set-in-Carbon-Graphite/GR_5825
Thank you so much for making this video. I have the same unit and have been considering stacking them to gain more space in my laundry area. I am wondering how its been for you guys having the dryer controls so high up? I am only 5'3" and it seems I would need to have a step stool to operate it and add/remove clothes. How has this been for you guys? Thanks!!
Hi Jennifer, I’m only 5’3.5” and here’s how I manage: turn the knob to 3 or 9 o’clock (where you can see the light selector) and then click it back up toward the Normal or Quick dry settings. Those the the ones you can’t see from below. Hope that helps!
@@fixthishouse3303 Hi. Thank you so much for your quick reply. Are you finding that you can reach in and get all the clothes including the small socks and things?
@@Bhappyjenn Yes, that’s not a problem. Hitting your head on the open door is a more of an issue.
I'm glad you asked this question. I'm only 5'1"!
I have been thinking about stacking the washer and dryer (same model), so I could install a dog wash tub in the laundry room. But, I don't think I will be able to reach the controls or see into the washer without a ladder. 😂
Thank you for the video a lot of help may I ask for a link to the stacking kit or exact name where to purchase. Appreciate
I think I bought it at Lowe’s. The kit you need will depend on the depth of the machine. I think Amazon carries them, but you should be able to find them in a big box store near you. Search online first to see what’s in stock. I will try to add a link or some more hints in a minute or so.
This link is for a 28” GE stacking kit from Lowes: www.lowes.com/pd/GE-Laundry-Stacking-Kit-White/1001371864
Here is a link on the GE website where you can check local availability. (Again, this link is for a 28” machine. Please confirm the depth of your machines.) www.geappliances.com/appliance/GE-Washer-Dryer-Stack-Bracket-Kit-GFA28KITN
Water line on the dryer?
We didn’t add one.
you need gfi outlets - and you dont vent dryer downward
Why would you not vent a dryer downward?
@@tammys4760 lint will built up in venting and it is against code as well - the only time you can vent downward is when installed in trailer home - you never want lint built up which will cause a major fire hazard