Assembly of the Harbor Freight Yukon 3 Drawer Bench
HTML-код
- Опубликовано: 10 ноя 2022
- The assembly of the Harbor Freight Yukon, 3 Drawer Bench. The instruction are not the best, so I hope this helps. I bought 2 of these while they were on sale for $125 a piece and attached them together. For the price you can't buy the materials for this. It works great as an assembly table as a woodworker. This harbor freight Yukon workbench is a budget friendly woodworking / multi functional workbench that offers many great features including, a metal mounted vise, a bottom shelf, three drawers that hold 50 pounds each and bench accessories. In this video, I want to give you all the info you need to determine if this workbench is worth the price.
The Harbor Freight Yukon 3-Drawer Bench refers to a specific product from Harbor Freight Tools, a retail company specializing in tools and equipment. However, as of my knowledge cutoff in September 2021, I do not have information on a specific 3-drawer bench from the Yukon line. Harbor Freight Tools regularly introduces new products and updates their inventory, so it's possible that a 3-drawer bench has been added to their Yukon line since then.
To get the most accurate and up-to-date information about the Harbor Freight Yukon 3-Drawer Bench or any other products, I recommend visiting the official Harbor Freight Tools website or contacting their customer service directly. They can provide you with detailed specifications, pricing, availability, and any other relevant information you may need.
DeWalt drill, amzn.to/3DOarzN
Allen Wrench set, amzn.to/3UDz09q
You can check out my Eye Candy Affiliate and use Wackey10 at check out for 10%off
linktr.ee/WackeyWorx
#makingithappen #woodworking #woodworker #wackerle #woodshop #dewalt Хобби
Hey I was looking at that bench today
Do you find it sturdy?
Yes I did. It is surprisingly pretty good for the price 👌
$179 now (may 2024) -- totally hoping they go back on sale so I can snag a couple!
I got two of them hooked together and they work great. I rearranged the doors a little bit but love the way they work out.
on sale right now!
@@pbailey68 nice!
@@pbailey68 - They were a month or so ago as well - picked one up! Love it.
Nice job Matt!!!
Thank you Joey!!
We put this together and had issues with the drawer only pulling out halfway. Is there a trick to it?
I had that same issue with the other one that I did. It was the draw slide that was catching on a screw. Hope this helps.
Great video content!! My only issue and I struggle with this in my own content so probably why I noticed it but I kept turning down volume during music segments and up during voice only. Also music seemed to overpower voice over when both were on. Maybe it was just my phone as well.
Thank you for the input. Much appreciated 🙏
Nice job Matt! 💪🏼💙
💙💙💙
Pretty neat. 🦾🦾🦾
👍👍👍
Not in North Carolina....A shame..looks like a good bench.
Should be able to order
Very Cool 🔥
😉💜💜😉
The problem with this bench is, debris falls through the holes on top of the bench into the drawers below.
I certainly agree with you unless you modify it and put a piece of plywood in between. I am actually fixing to do a modification where I use the harbor freight tool Chests
Ok I'm tracking this back to back workbenches, both will cost 200 each with tax in california.. I put one together today, i want to add more drawers. What did you do to modify the second workbench to get both vises on the same side, if I may ask?
I flipped the drawer mounts to be on the other side 😉
Good video but lose the loud music brother. It's annoying. Think, usually the woodworkers are not intro metal or heavy rock music :) Just do the process in silence . It is more enjoyable, etc. Just my opinion. Thank you.
Thank you for watching. I appreciate the comments.
Could the vise be swapped to the other end on one of them? I'm seriously considering next time these go on sale to grab 2 like you did and replace my entire assembly table with them but since It would also double as outfeed from my table saw it would almost be more beneficial to have the vises on the same end plus possibly be able to vise up longer boards for hand jointing. I'm stuck in this do I build it but if they are on sale be really hard to build it for less if not impossible.
I had to modify the tables to get them on the same side with them back to back.
@@WackeyWorxWorkshop Oh so you did move the vise to the other end on one of them? In the video looked like it was one on each end. So it can at least be done which is nice.
@@4321Woodworking yes sir it can
@4321woodworking - did you ever make any videos of how you modified the table to switch the vice to the other side?
@@volpenhein17 I still haven't picked any up and done it. I'm still using my old assembly table, just haven't had the funds or time to make a change like this.
👍👍👍
😊 💪💪