Mr-fix you have shown many helpful things to us but the main answer and solution remains. Please show us how to patch the unit and generate the swap code for carplay, voice command and performance monitor. I'm sure everybody waiting for it. Drop the bomb with one video :)
There are two reasons why I didn't make a video about patching yet: 1. Depending on the unit there are different ways for patching. MIB2High by Harman, MIB2Std by Delphi, MIB2Std with Nav by Technisat, MIB2Std without Nav by Technisat - each requires different approach, different tools, and different level of complexity. 2. I'm not 100% if publishing video about patching the unit is not against YT policy.
@@mrfixpl im pretty sure there are tons of yt patching videos available on yt. U should be fine . Yt comes for bigger content creators when they search for something wrong
Hi, I have 9 values in vcrn, not 10, the zero literally is throat is put before or after??? i made 3 attempts and i have 3 codes it says invalid to delete them which function should I select of the two??? and I enter it as the same procedure??? or do I just write FFFFF etc???? FFFFFFFD - Clear illegal FECs FFFFFFFE - Clear new & no permission FECs
Hello, thanks for the video. Perform for step, you can install the codes but they appear invalid, in the part of compatible codes if the codes that I install appear
@@mrfixpl How can I patched the unit? I want to activate App Connect CarPlay Mirror Link. Is it complicated, do I use DLink, or can I do it via sd card?
hello dear, could you help me? I have a problem with the infotainment of the Seat Ibiza, mine broke and I bought another one that I placed but the message (active component protection) appeared, how can I unlock it with OBDeleven? Thanks 0:22
Hi Mr fix, I have tried to do the sequence as you have done on this video and it does not seam to work or when the code does go in it says invalid. I have even tried to delete the two codes for android auto with the codes from the website and does not delete. I am using the new generation obd eleven. Any suggestions I have a mk7 golf 2015.
Hi Mr-fix. Thanks for the nice video. I did everything like in the video. After the installation, however, the message “Code invalid” appears. What am I doing wrong?
@@mrfixpl Question: is it possible to load SWaP codes into an unmodified 'MST2' Discovery Pro (passat B8, 2016) type headunit? I just want to unlock the App-Control menu and/or Mirrorlink.
Hi, I have a question. After deleting all the swap code and uploading again, my VIN and VCRN on the radio changed, it's not the same as my car, how do I change it, I have a mib2 amundsen.
Год назад
So , odbeleven gen next is enough for activation swap and Smartlink with the code generated on website? Also there is sdcard technic is still valid for activation of smartlink?
Hej kolego, piszę po polsku, bo to jest chyba Twój anglojęzyczny kanał (Łonacznik? Pozdrawiam Ślązaka ;) ) Mam taki problem, że generuję sobie kod, wchodzi przez OBD bez problemu, ale mam problem z jego aktywacją. Mianowicie ostatni punkt: 5F → Basic Settings → Release of SWaP function → start basic settings nie mam takiej możliwości/opcji. Mam informację, że Basic Settings: not activated czy tam not active i nie mogę nic zrobić, do tego wywala mi teraz statyczny błąd, którego nie mogę skasować, chociaż wprowadziłem znów 00 w miejscu wprowadzinego kodu SWAP, to nadal wywala mi ten błąd. Ale bardziej mnie interesuje, co mam zrobić z tym Basic settings, żeby było aktywne Pozdrawiam serdecznie, odwdzięczę się za pomoc
One Question: If there are no "supported codes" available... does that mean that i'm unable to get upgrades (as example: cruise control system) from VW dealers?
Hi everyone!! I have one question. In my navigation unit doesn’t appear in coded supported anything . I would like install the sport monitoring with obdeleven but I prefer asking you before to do it. Thanks for all the content of your channel!!
Not sure for android auto but pretty sure car play requires a module in-between usb port in car and Mib cos of course Apple charges people to be able to implement their crap.
This didn't work for me? Mr-fix i have done everything the same the only difference is that i have to press and hold a tick button instead of sliding. Please advise.
I haveca Skoda octavia tsi 2017 and the radio is with Android bye USB cable only. I have purchased the codes original box but i don't know install ir. Can You help?
Hy, congratulations, your video it's great. So I need a help, I try in my Polo install the 60400 swap code but is not a valid and the remove options doesn't work. How can I delete invalid codes, have other way? Sorry my English is so bad
good day, can you advise me? according to your instructions, I will do everything that is necessary, the new swap will be added to me as installed, but it does not work, it says on the radio that the code is invalid? Is there a way to solve it? Thank you for the answer
Hey Mr.Fix, can you tell us about swap coding, on your other video you are saying that if you want to install swap or fec codes your mib2 std2 has to be swap patched, but on this video you are saying if you got keys you can enter them on obd11. Now does the system needs to be swap patched, or its not necessary to swap patch.
Hello my friend, I wanted to see the following with you, I ended up installing the Baidu FEC, everything was installed correctly, but it was not allowed, what is the procedure to delete this FEC or this error?
Hi! I wanna enabling voice command, my car have Just installed the button on steerling wheel, but when I pressed it, it called “go to dealer for code”. How can I unlock with OBD11? Thanks
My unit doesn’t have navigation, how can I install this since I don’t have it? Got the update file, and the patch file, but you said it won’t work if I don’t have navigation with the car please help - polo 6c 2016
hello dear, could you help me? I have a problem with the infotainment of the Seat Ibiza, mine broke and I bought another one that I placed but the message (active component protection) appeared, how can I unlock it with OBDeleven? Thanks
Hello. I have a Fabia 3 FL Swing in the 2016 car. The service said they could not activate the smartlink feature because of this. Is there another way to do this?
So if ur code you want to enable isnt in the support codes then im assuming there is no way to enable it. Ive have nothing in the supported codes but would like to get the performance monitor
@@mrfixpl hi i have put a mib11 in my mk7 golf it came from a golf 7.5r it had carplay till i put it in my car can you tell me if i can re use it or do i need a new code. or how do i patch it thanks
When you install the unit in a different car it will detect it (it checks VIN to see if it's not swapped between vehicles) and show ComponentProtection on the screen. This is an anti-thief mechanism that limits the unit functionality when installed in different car. You need to go to dealers to remove the Component Protection after they confirm that the unit is not stolen. When they do that, they will upload your old activation licenses, or leave the old ones which will be invalid since the unit is in a different car now. Either way CarPlay will not work because of missing license or invalid license. You can but the license at dealers (~$250) or patch the unit and upload self-generated activation code.
@@mrfixpl hi thanks the cp is off as it was done with odis will hav a look see if i can find more info about how to go about patching it thanks for your reply
Good.. I did the whole process and in the end it becomes invalid... It is a Seat Leon 5F 2015.. Can you tell me that it could be bad so I wouldn't give it?!
Hello, I have a problem with MSTD2.. The navigation does not work, I have tried everything, the only thing that is wrong is that the code 094d0008 only appears in installed codes and does not appear in supported codes.. Another car similar to mine appears 094d0000 in supported codes.. Is there any way to introduce this code as supported?
Hello. I remove in legit way the CP of a MIB2 but now it is impossible to enable AMI swap. How can I bring back the function? Is it even possible to patch the unit?
If you have iPhone, get the 2nd generation (the black one). If you have Android you can get the 1st gen (white one, it's cheaper). You will need PRO license as well which you can buy separately or in bundle with the device.
Need OBDeleven?
🎟 Get 10% OFF with code: MRFIX10
🛒 mr-fix.info/redirect/obdeleven
Hello, for the OBDeleven, Can I buy the one I want? I must buy an subscription for 1 year of it's free? Thank you
Mr-fix you have shown many helpful things to us but the main answer and solution remains. Please show us how to patch the unit and generate the swap code for carplay, voice command and performance monitor. I'm sure everybody waiting for it. Drop the bomb with one video :)
There are two reasons why I didn't make a video about patching yet:
1. Depending on the unit there are different ways for patching. MIB2High by Harman, MIB2Std by Delphi, MIB2Std with Nav by Technisat, MIB2Std without Nav by Technisat - each requires different approach, different tools, and different level of complexity.
2. I'm not 100% if publishing video about patching the unit is not against YT policy.
So how do you get your cars activation code?
What does it mean to be patched ?
How can you tell if a unit is patched or not ?
How do you patch
@@mrfixpl im pretty sure there are tons of yt patching videos available on yt. U should be fine . Yt comes for bigger content creators when they search for something wrong
Hi, I have 9 values in vcrn, not 10, the zero literally is throat is put before or after??? i made 3 attempts and i have 3 codes it says invalid to delete them which function should I select of the two??? and I enter it as the same procedure??? or do I just write FFFFF etc???? FFFFFFFD - Clear illegal FECs FFFFFFFE - Clear new & no permission FECs
Where do I get the code?😐🤔
Thank you all done 10/10 and codes cleared
Hello, thanks for the video. Perform for step, you can install the codes but they appear invalid, in the part of compatible codes if the codes that I install appear
How do you get the activation key codes to begin with?
it needs to be purchased from authorized VW dealer, same as you would buy a part from them.
Buy from dealer or, if your unit is patched, you can upload self-generated codes.
@@mrfixpl hey how do you generate your own codes? And how do you know which version you need to be on?
@@mrfixpl How can I patched the unit? I want to activate
App Connect CarPlay Mirror Link. Is it complicated, do I use DLink, or can I do it via sd card?
@@mrfixpl So if my unit is not patched, there is no way I can upload self-generated codes via OBD11?
hello dear, could you help me? I have a problem with the infotainment of the Seat Ibiza, mine broke and I bought another one that I placed but the message (active component protection) appeared, how can I unlock it with OBDeleven? Thanks 0:22
Thank you for this tutorial. I see that you have unlock sport screen to. Nice.
Yes, I have Performance Monitor. And the ECU is supporting it fully.
@@mrfixpl but how did u get the code for performance monitor?
@mr-fix is it necesarry to patch the Unit (green monitor) or can i insert the right code directly via obd?
Does this work when you upload this codes that you can enable performance monitoor sport after that?
How can i get my code that you put in the transfer code step?
Can this method apply on mib3 with original swap code like full link ?
Did you do this with the white dongle or the new dongle? Because i cant find it by the white dongle
Where to get activation code?
2:32 where is that code?
Hi Mr fix, I have tried to do the sequence as you have done on this video and it does not seam to work or when the code does go in it says invalid. I have even tried to delete the two codes for android auto with the codes from the website and does not delete. I am using the new generation obd eleven. Any suggestions I have a mk7 golf 2015.
Hi Mr-fix. Thanks for the nice video. I did everything like in the video. After the installation, however, the message “Code invalid” appears. What am I doing wrong?
Probably either unpatched FW or wrong VCRN used to generate swap?
Unfortunately the security acces code you’re using doesn’t work for me… Do you have any tips how to find the right one?😅
Love your videos, thanks man!
✌️
@@mrfixpl Question: is it possible to load SWaP codes into an unmodified 'MST2' Discovery Pro (passat B8, 2016) type headunit? I just want to unlock the App-Control menu and/or Mirrorlink.
Nie widzę u ciebie przycisku fizycznego od app connect, a w menu masz czyli musiałeś to dodać, czy wystarczy zaktualizować oprogramowanie na nowsze?
Hello there
Where can I get the transfer release code for a swap function?
Hi, I have a question. After deleting all the swap code and uploading again, my VIN and VCRN on the radio changed, it's not the same as my car, how do I change it, I have a mib2 amundsen.
So , odbeleven gen next is enough for activation swap and Smartlink with the code generated on website? Also there is sdcard technic is still valid for activation of smartlink?
Mr-fix how can i contact with you ? I do everything how you show on the films but after all my swap codes are invalid. How i can fix it ? Regards !
Help!!
I followed the instructions to enable android auto and the code appears as installed but shows as INVALID.
Has anyone else has this issue?
Hej kolego, piszę po polsku, bo to jest chyba Twój anglojęzyczny kanał (Łonacznik? Pozdrawiam Ślązaka ;) ) Mam taki problem, że generuję sobie kod, wchodzi przez OBD bez problemu, ale mam problem z jego aktywacją. Mianowicie ostatni punkt: 5F → Basic Settings → Release of SWaP function → start basic settings nie mam takiej możliwości/opcji. Mam informację, że Basic Settings: not activated czy tam not active i nie mogę nic zrobić, do tego wywala mi teraz statyczny błąd, którego nie mogę skasować, chociaż wprowadziłem znów 00 w miejscu wprowadzinego kodu SWAP, to nadal wywala mi ten błąd. Ale bardziej mnie interesuje, co mam zrobić z tym Basic settings, żeby było aktywne
Pozdrawiam serdecznie, odwdzięczę się za pomoc
One Question: If there are no "supported codes" available... does that mean that i'm unable to get upgrades (as example: cruise control system) from VW dealers?
Hi everyone!! I have one question. In my navigation unit doesn’t appear in coded supported anything .
I would like install the sport monitoring with obdeleven but I prefer asking you before to do it. Thanks for all the content of your channel!!
Hi Mr Fix, do you need any kind of hardware to activate the carplay? Or just the code and the OBDEleven?
Not sure for android auto but pretty sure car play requires a module in-between usb port in car and Mib cos of course Apple charges people to be able to implement their crap.
My unit is patched but i don’t see the codes section
Hi Mr-fix, my unit is already patched. How could I generate the missing codes? Thanks a lot, Alex.
Soon there should be a tool available that can do this.
how did you install the patch?
This didn't work for me? Mr-fix i have done everything the same the only difference is that i have to press and hold a tick button instead of sliding. Please advise.
Can you make a video on how to update the software in the mk7 for a newer one ?
On mine i dont have carplay/mirror link
This is a full hardware computer upgrade from MIB1 to MIB2. That is far more involved, but not terribly more complicated.
Hey, my problem is that i cant see "Function enabling codes (FEDC,SWap). My discover pro doesnt show me that. Pls can you help me.
Don’t work for me? The code is now showing as installed on the system but says “inactive” how do I make it active?
I haveca Skoda octavia tsi 2017 and the radio is with Android bye USB cable only. I have purchased the codes original box but i don't know install ir. Can You help?
Which version of obdeleven is enough to work with swap/fec? Pro? Or ultimate? Thank you
Hy, congratulations, your video it's great. So I need a help, I try in my Polo install the 60400 swap code but is not a valid and the remove options doesn't work. How can I delete invalid codes, have other way? Sorry my English is so bad
good day, can you advise me? according to your instructions, I will do everything that is necessary, the new swap will be added to me as installed, but it does not work, it says on the radio that the code is invalid? Is there a way to solve it? Thank you for the answer
How do I enable the FEC menu in this software management menu? My car is USA 2016 Golf GTI with 6.5" DiscoverPro MIB2; MST2_US_VW_P0504D
Hey Mr.Fix, can you tell us about swap coding, on your other video you are saying that if you want to install swap or fec codes your mib2 std2 has to be swap patched, but on this video you are saying if you got keys you can enter them on obd11. Now does the system needs to be swap patched, or its not necessary to swap patch.
My touchscreen is broken. Is it possible to full control de functions using only the knob?
Hello! I follow exactly the same stems in my obd 11 and it doesn't work. My unit is mib2std without navigation. Can you please help me?
Hello my friend, I wanted to see the following with you, I ended up installing the Baidu FEC, everything was installed correctly, but it was not allowed, what is the procedure to delete this FEC or this error?
Hi! I wanna enabling voice command, my car have Just installed the button on steerling wheel, but when I pressed it, it called “go to dealer for code”. How can I unlock with OBD11? Thanks
My unit doesn’t have navigation, how can I install this since I don’t have it? Got the update file, and the patch file, but you said it won’t work if I don’t have navigation with the car please help - polo 6c 2016
Czy car scanner pro też to zakoduje?
hello dear, could you help me? I have a problem with the infotainment of the Seat Ibiza, mine broke and I bought another one that I placed but the message (active component protection) appeared, how can I unlock it with OBDeleven? Thanks
Followed all the steps but it does not work :(
Hello.
I have a Fabia 3 FL Swing in the 2016 car. The service said they could not activate the smartlink feature because of this. Is there another way to do this?
Hello. Which number of my unit MIB2 should I give and where do I find it? Is it the number that is blurred? Thank you for your answer.
U have it??
My car miss function enabling codes in service mode? How to find that?
Hey, what if i don't have the app connect icon? how do i get it? i have a MST2_EU_VW_P0225D media system
Do you know how to write code with the obdelleven to upgrade 2015 mib1 radio to a mib2 system with apple carplay?
Hi! I have original codes from Skoda (key, code and pin). Is there a way to generate the SWaP by myself?
I believe you need ODIS to enter this data, send it to VAG server and generate FEC for your car.
@@mrfixpl Thank you for the quick response!
Which is better, obdeleven or Carly?
Can FEC/Swap codes be registered on the STD 2 ZR MIB only after the toolbox is installed?
Sw 0475 hw 41
Update firmware to latest (0480 most likely), install toolbox, use toolbox to generate ExceptionList file.
Bonjour , je cherche a activer FullLink sur ma Seat , mais MIB ne fonctionne pas . Pouvez vous m'aidez
Hi there.. can you help me with the activation carplay in my Skoda octavia 2016… ive got obdeleven pro
Activation key details - from where we can find that key , only from official dealer ?
Check this: ruclips.net/video/fvZPQg2oMpU/видео.html
So if ur code you want to enable isnt in the support codes then im assuming there is no way to enable it. Ive have nothing in the supported codes but would like to get the performance monitor
Did you manage to figure it out ?
@@jahid_1 Did you manage to figure it out? because i see Jonathan didnt asnwered you
How you passed the charger wire from air vent ?
drilled a 6mm hole inside the vent and guided the cable from there to the fuse box, where i have USB charger connected with a fusetap.
@@mrfixpl do you have video about ?
Hi mate
u have been written paste on code
from where we get this code?
Thxx
How do we get the activation code?
Same question?
Hi Can you Tell us what code did you used is it carplay code or android auto or what ? thanks
Would you have the link to buy this OBD that I use to make these modifications to my Golf VII, I'm from Brazil. Thanks
Get 10% OFF with code: MRFIX10
mr-fix.info/redirect/obdeleven
hello Mr.Fix , can u please guide me how to add the fec swap menu on Mib3 noting that i have vw ID4 Car
Please, where to find the code of my CarPlay ? I have it activated.
Hi,
Many thanks for your help, where i can buy activation code. ?
Hey Mr-fix .Can I patch the existing version P0245T to use App connect or do I have to update to P0254T first and then patch?
where can i get or buy the FEC / SWaP code for app connect enablement
regards
Unless you have a patched main unit, it needs to be generated by VW for your car.
@@mrfixpl hi i have put a mib11 in my mk7 golf it came from a golf 7.5r it had carplay till i put it in my car
can you tell me if i can re use it or do i need a new code. or how do i patch it
thanks
When you install the unit in a different car it will detect it (it checks VIN to see if it's not swapped between vehicles) and show ComponentProtection on the screen. This is an anti-thief mechanism that limits the unit functionality when installed in different car. You need to go to dealers to remove the Component Protection after they confirm that the unit is not stolen. When they do that, they will upload your old activation licenses, or leave the old ones which will be invalid since the unit is in a different car now. Either way CarPlay will not work because of missing license or invalid license.
You can but the license at dealers (~$250) or patch the unit and upload self-generated activation code.
@@mrfixpl hi
thanks the cp is off as it was done with odis will hav a look see if i can find more info about how to go about patching it
thanks for your reply
Jaki kod jest odpowiedzialny za język , auto z Canady brak języka polskiego.
Good.. I did the whole process and in the end it becomes invalid... It is a Seat Leon 5F 2015.. Can you tell me that it could be bad so I wouldn't give it?!
As said in the video and in the description below: self-generated codes will work only on patched units.
Hello, I have a problem with MSTD2.. The navigation does not work, I have tried everything, the only thing that is wrong is that the code 094d0008 only appears in installed codes and does not appear in supported codes.. Another car similar to mine appears 094d0000 in supported codes.. Is there any way to introduce this code as supported?
Po akcencie poznałem, że Polak. 😃
Witam. Proszę o podpowiedź co zrobić jak po zainstalowaniu kodu jest nieaktualny.
Hi I have the OBD11 How do I put my car into developer mode so i can add mirror link/carplay please?
Check this: ruclips.net/video/R9WlrkBioi8/видео.html
How can I get the special code for my car?
Hello. I remove in legit way the CP of a MIB2 but now it is impossible to enable AMI swap. How can I bring back the function? Is it even possible to patch the unit?
Nie mam opcji w OBD 11 change service ... Może to wina nowszej wersji obdeleven
Masz aktywną licencję PRO?
Hi mr Fix :) which OBDeleven device do I need for my vehicle (golf VW 2019)? thanks in advance
If you have iPhone, get the 2nd generation (the black one). If you have Android you can get the 1st gen (white one, it's cheaper).
You will need PRO license as well which you can buy separately or in bundle with the device.
What code do you pasze in transfer of release code?
hi i only have 1 issue which is were do you get your adaptation code from?
thank you
any answer?
Ha installato un codice originale Volkswagen
Do I need patched mib2 unit to be able to use OBDeleven and enable locked codes? Can I use Vgate OBDII wifi with OBDeleven tool?
Is it possible to activate acc with obdeleven? How to buy/get swap?
Help me, I have exactly the same problem with the 2017 jetta, they could not remove anything😔😢
@mrfixpl do I need to install the toolbox first?
Like always, awesome content .. 🦾🦾
Thank you!
i have problem , ihave obdeleven ,00060800 - Apple Carplay is invalid ??plz help i have glof7.5 Discover Media MIB2.5 2017
Hi, did you fix the error?
Where can i get a Code for App Connect if i dont have one
@Mr-fix where do we find Swap Code Generator ?
ruclips.net/video/fvZPQg2oMpU/видео.html
Will upgrading firmware cause codes to become locked again?
How do you get the code ifnot have one? Thanks.
I have the same unit and obd11 but how do i patch the unit?
"The same unit" or "my display looks the same"?
can you show how to remove valid swap code?
How can i change my analog clock also with numbers please?
Hi; can you you help me to resolve the problem of component protection active, thanks
I did all those step and then i realizd that i need to patch it before even start. Nothing workt
Hey there how are you and will this work on a 2013 vw scirocco r and I am really lucky girl videos and keep up the good work thanks