Great videos. My dealership here in Chile fucked the SWAP code installationfor the performance monitor in my Mk 7.5 GTI and the dimwits didn't know how to fix it back, but with your videos I was able to do it myself and even update the MBI firmware. You, sir, are a blessing. Thanks a lot and keep up the great work!
I'm in the middle of this exact same scenario. I did the MIB 1 to MIB 2 swap in my GTI, brought it to the dealer to have component protection removed and in doing so they screwed up the FEC/SWAP codes and now nav, carplay, and performance monitor don't work anymore. Now I have to fix it myself. Can you share how you did the patch?
Great videos, are you going to do a video on patching MIB2 as we can't install self generated codes without patched units, I'm sure we will all be eternally grateful if you can help
Hey man, did you manage to find a solution for non patched units? i have a non patched unit but i find no info over the web for how to unlock full link on a non patched unit
Hai just a question, mine is the next gen OBDeleven basic plan, from your clip 3:25, saw you click on the “change service” but unfortunately mine don’t have that function. Is this step compulsory? Thank you.
Thank you for this video. Some id*ots here in Slovenia are charging a big ammount of money for enabling those functions on VW,Skoda and Seat vehicles. You've helped me a lot. THANK YOU!
Hi mr-fix, I have applied MIB2 toolbox but I do not see there patch option (in green engineering menu), am I missing something or there is additional video tutorial for patching SWaP codes? I have version MST2_EU_VW_ZR_P0138T and part number 1Q0035864. And one additional note I have OBDeleven Pro version. I have added the codes but they show as Invalid (I suppose that's because not patched right).
I don't know but it doesn't have patches S2158 MU1156 new update to install on K3332 MU1187 or K3342 MU1427 yes it is Patch. Does anyone know if you can find patches S2158 MU1156
Mr fix, would you have a video or a website where i can learn how to patch my unit ? I have an audi Q5 2018 with mib2 high. Thanks. I have a very old software i never updated the unit. Thank you
Hi Mr Fix. Thanks for your video. I tried it on my sharan, but all code showing invalid. Did i do something wrong? I have mib std2 pq+/nav SW TRAIN VERSION MST2_EU_VW_PQ PO245T PART # 5K7035200E HMI SOFTWARE H25.14:78 STD2PlusPQ EU** TIA
Thx ! The sport mode (Seat Leon 5f pre lift) appeared after starting the engine ! But, it's a retrofit MIB1 to MIB2 so i have empty value on the performance monitor. (Bar temp...) Do you know what i need to flash please ? :)
ciao complimenti per il video davvero interessanti i tuoi video vorrei sapere come riesci a collegare lo smartphone alla macchina è sufficente il blutooth o tramite un cavo OBD' GRAZIE MILLE!!!! Continua a publicarne tanti altri!!!!
FEC/SWaP codes are signed with VAG private key. Self-generated keys will not be properly signed and will be detected by the unit in the car as invalid since the signature is not correct. Patching the unit for SWaP will trick the unit into recognizing self-generated codes as valid.
Hi, is there an overview of the differences i patched from zr 378 to zr 478 and patched the system. But now i see version zr 480 , can i update to zr 480 and install the patch also, and are my modification with obdeleven still avaialble ?
Hello ! I bought last year a MIB2 STD 0245 on ebay. It has CP Bypassed and the VIN number is not the same as my car... Do you think it will work ? Thank you !
@@mrfixpl Thank you so much for replying, you should get affiliated/sponsored by them! I've got MIB2, 0253T, patched all Fec/swap done and all valid. Performance monitor and all working but in Full Link I only have MirrorLink showing? No android auto or apple Carplay on the full link screen? Any ideas? I know I have to change the usb port for apple Carplay to work but it should still show surely. Any help would be appreciated MrFix!
hello, I followed your procedure and even if I had 00060400 available as a code to unlock, once everything is done it tells me invalid code, you have a solution to give me, thank you very much
Me too i thought i had a patched unit (I have CP bypassed). I bought it from Poland on eBay. But is was not the case, the code for Performance Monitor is set as Invalid...
When I “slide to write” it just keeps loading. Also the “Current value” that’s already filled in on your screen just says “0” on my screens. Do you know how to fix this?😬
Maybe it has something to do with the “Security access” code you used in a previous video… The problem is that the code you used (20103) doesn’t work for me
nice vide that long generated code seems to be a long coding. If it's original, then OK but what happens if the orignal long coding is modified? is than function lost? have you verified or tried?
Buongiorno ,io vorrei installare il performance monitor ma mettendo il fin dello stereo il codice e diverso da quello che dice il sito da lei consigliato ..grazie per l aiuto ❤
Czy wykorzystujac ten generator mozliwe jest dodanie app connect do composition media z 2016 (wiekszy wyswietlacz)? Aktualnie nie mam na wyswietlaczu widocznego kafelka z app connectem. Czy jest jednak sprawa hardwarowa i wymaga to wymiany stacji w schowku?
i have a US gti but this is my firmware MEN2_EU_VWGPX_P7381L i cant seem to find a new version it;s an LG unit it says im trying to update the performance gauges
I have a Golf Mk7 but with a Discover Pro. My list of suported codes is empty, moreover, when I tap on an installed code VCRN, Date and FIN (not VIN?) are empty too... Strange?... Do you know how is it possible or why? Thanks in advance
Nice video, thanks! I have a Golf 7.5 with MIB2 Discover Media (no pro!) The MIB FEC/SWaP Code Generator requires a 10 digit VCRN According to the detailed view of my installed codes, my VCRN appears to be only 9 digits (xx xx xx x xx) What's happening here?
good day, can you advise me? according to your instructions, I will do everything that is necessary, the new swap will be added to me as installed, but it does not work, it says on the radio that the code is invalid? Is there a way to solve it? Thank you for the answer
i got a hyundai elantra 2023 and i install performence monitoring in my andriod auto but the only probleme i got is the number is freeze they are all the time in zero some can help me
Ponoć w GTI performance 2015 roku nie było takich. Czy w tym roczniku w radiu Discovery pro jest możliwość odblokowania tej funkcji? Ps.500 komentarz 🤪
Jeżeli jest system MIB2 (wersja softu zaczyna się od MHI2 lub MST2), to jednostka powinna wspierać te zegary. Tak właśnie było u mnie. MK7 2.0TDI 2015/16 z MIB2 (MST2) i zagadało.
W moim radiu po wjescu do menu serwisowe nie mam pozycji Function enabling codes Hmi software h25.14.38_high2_EU Więc chyba nie ma możliwości uruchomienia tych zegarów
Hi, I have used your AIO firmware for Seat Leon MIB2 with Harmann system. Problem is Android Auto. It worked when I initially installed it, but now does not any more. I thried different cables and 2-3 different Android phones. None of them work. Any recommended solution?
Great video, thanks. I have 3Q0 035 874A Head unit with MST2_EU_VW_ZR_P0252T software, and Mirrolink is available on it from before. Device is patched and I successfully installed 00060900 and 00060800 codes. Both codes are listed as Valid codes, but in Appconnect screen there is only Mirrorlink visible, and I can't connect Android phone successfully. Do you have some valuable advice on this? Thanks in advance ps. I used same method to activate sport mode, and it's successfully activated
Just a question, i checked my composition media and it has de code available for the navigation, but there no button for it, will it work if i install the code or without the button is futile to activate the code?
Hi man, you make me vary happy with this video. I own coposition media in my golf gti 2017 facelift ,so what I need to patch my unit. is it the firmware update like from your one video?
Mr fix , just bought a 2019 seat ateca. How do I know if the mib 2 is patched?can I use OBDeleven to unlock apple car play to unlock the full ink or there a specific thing to make first? My mib 2 has all kinds of features, I think that it might’ve been patch but no full link.
Wait you are telling me I can get a FEC for Audi Connect? Wtf? That can't be possible. I thought the car has to talk to the Audi servers before enabling the subscription...
hello. thanks for the video. I checked on my superb3 for the installed codes, but when I enter to see details on any VALID codes, in details it says invalid. my car is brand new and never touched for any modificaiton. thank you
after a try of app-connect activation according to video in HW menu window it says INVALID, probably i need to patch my multimedia unit? how can it be done?
Hello, i update software finaly, it worked from SD card from USB it didnt worked, and i tried to add performance screen but code is invalid, idk why, and i tried to delete it but cannot delete it, any idea ? also my screen sometimes have phantom touches :(
@@mrfixpl Czy jak nie mogłem uruchomić trybu serwisowego (tam gdzie jest zielone menu) po wgraniu toolboxa pojawiła się możliwość edycji w trybie serwisowym (zielone menu) oznacza to, że jednostka została spatchowana..?
Witam jak w inny sposób znaleźć kod VCRN? Nie wyświetlają mi sie zainstalowane kody, dlatego nie mam możliwości odczytania VCRN. VW sharan do którego dokupiłem Media MIB STD2 PQ +/Nav sprzedający dostał ode mnie vin auta i jednostka działa w moim aucie, chciałbym dołożyć mu mirror link, ale z tego co czytam musze mieć w/w kod VCRN. Pomożesz?
Need OBDeleven?
🎟 Get 10% OFF with code: MRFIX10
🛒 mr-fix.info/redirect/obdeleven
Which device should be used for this process, VCRN PRO Pack or ULTIMATE Pack?
Great videos. My dealership here in Chile fucked the SWAP code installationfor the performance monitor in my Mk 7.5 GTI and the dimwits didn't know how to fix it back, but with your videos I was able to do it myself and even update the MBI firmware. You, sir, are a blessing. Thanks a lot and keep up the great work!
How do you do the patch that he mentions?
I'm in the middle of this exact same scenario. I did the MIB 1 to MIB 2 swap in my GTI, brought it to the dealer to have component protection removed and in doing so they screwed up the FEC/SWAP codes and now nav, carplay, and performance monitor don't work anymore. Now I have to fix it myself. Can you share how you did the patch?
Great videos, are you going to do a video on patching MIB2 as we can't install self generated codes without patched units, I'm sure we will all be eternally grateful if you can help
Hey man, did you manage to find a solution for non patched units? i have a non patched unit but i find no info over the web for how to unlock full link on a non patched unit
@@igodly7550 done some time ago. here it is: ruclips.net/video/a9uwYmBPc1Q/видео.html
Hai just a question, mine is the next gen OBDeleven basic plan, from your clip 3:25, saw you click on the “change service” but unfortunately mine don’t have that function. Is this step compulsory? Thank you.
thnx for the video. "mst2fecgen.mibsolution.one/" i think this link is not longer working. Or it's because of my connection.?
Mr fix, we need a tutorial how to patch the MIB 2💪🏼 you are great!
i second this please :)
yes how ?
@@mczuydi ruclips.net/video/a9uwYmBPc1Q/видео.html
Would be awesome !!!
How do you patch it?
Thank you for this video.
Some id*ots here in Slovenia are charging a big ammount of money for enabling those functions on VW,Skoda and Seat vehicles. You've helped me a lot. THANK YOU!
Hi mr-fix,
I have applied MIB2 toolbox but I do not see there patch option (in green engineering menu), am I missing something or there is additional video tutorial for patching SWaP codes?
I have version MST2_EU_VW_ZR_P0138T and part number 1Q0035864.
And one additional note I have OBDeleven Pro version. I have added the codes but they show as Invalid (I suppose that's because not patched right).
I have the same problem
Did you got any solution ?
@@whoisuk2662 please tell me you found a solution?
hi, First update G.E.M (Green engineering menu) ruclips.net/video/t-nh4kzIW4s/видео.html
hello, the page to generate the codes cannot be found when i click on the link
Super a polska wersja językowa będzie?
Hello. could you show us how to do this coding with vcds?
Does this method work for MIB1 and does it also have the performance monitor?
From what I have seen in my car, MIB1 doesn't seem to have performance monitor 😌
I have a VW Passat MHI2_ER_VWG11_S2158_MU1156_PATCH ??
I don't know but it doesn't have patches S2158 MU1156 new update to install on K3332 MU1187 or K3342 MU1427 yes it is Patch. Does anyone know if you can find patches S2158 MU1156
How do I know if my unit is patched?
Czy da się to zakodować inaczej , moze przez car scanner pro?
i need vw radio update MST2_EU_VW_E0220D
Mr-fix ; how to unlock seat full link with toolbox ? I used swap code mirror link with OBD11, it doesn't accept . thank you Master
how can I find the VCRN code? I don't have codes instaled.
Can I have Android Auto on VW Golf 7 2013? I don't have NAV button on multimedia...
Mr fix, would you have a video or a website where i can learn how to patch my unit ? I have an audi Q5 2018 with mib2 high. Thanks. I have a very old software i never updated the unit. Thank you
mibwiki[.]one
Hi Mr Fix.
Thanks for your video.
I tried it on my sharan, but all code showing invalid.
Did i do something wrong?
I have
mib std2 pq+/nav
SW TRAIN VERSION
MST2_EU_VW_PQ PO245T
PART # 5K7035200E
HMI SOFTWARE
H25.14:78 STD2PlusPQ EU**
TIA
what is this mean?
Unit must be SWaP patched for those FEC/SWaP codes to be recognized as valid.
swap codes can apply by VCDS? or have to use obd eleven
What patch do i need on MIB HIGH?
I have OBD11 Pro , I have replaced another MIB2 , should I use the old FIN and VCRN of the car or the new MIB2 ,thanks You !!
I just came across this video. I have an alltrack and want to enable performance mode. Do I need to patch the MIB2? How do I do this? Thanks
installing the MIB toolbox does the trick
Thx ! The sport mode (Seat Leon 5f pre lift) appeared after starting the engine ! But, it's a retrofit MIB1 to MIB2 so i have empty value on the performance monitor. (Bar temp...) Do you know what i need to flash please ? :)
Where you able to fix this? My car has performance monitor enables but no value for Bar unfortunately.
I used the toolbox to, it worked. But I can’t find the codes for driving profile. Can someone help me which one I need ?
Yes, now we only need a tutorial on how to patch a MIB unit! 😇
Yes!
Yup
Any update on a tutorial on patching mib2 ? Don't want to waste my money on obd11 if I can't install codes.
Still waiting for it.😆
Thanks for the video. Got my OBD11, need instruction on how to patch MIB please, Thank you.
ciao complimenti per il video davvero interessanti i tuoi video vorrei sapere come riesci a collegare lo smartphone alla macchina è sufficente il blutooth o tramite un cavo OBD'
GRAZIE MILLE!!!!
Continua a publicarne tanti altri!!!!
Hello can you explain what does mean unit must be patched that everyone i talking and how can you check if your unit is swap patched?
FEC/SWaP codes are signed with VAG private key. Self-generated keys will not be properly signed and will be detected by the unit in the car as invalid since the signature is not correct.
Patching the unit for SWaP will trick the unit into recognizing self-generated codes as valid.
@@mrfixpl How can I check if my unit is already patched?
What if I have composition media instead of discovery media? Can I patch it or am I fuc**d?
Hi, The Link for the generator is not working update, please.
now we need a video how to do the SD patch for CP off :-D
Yesss needed for sure!
M40Q code to activate End-Of-Line session with VCDS 😊
Hello, I have version MST2_EU_VW_PO628D and H28.28.133_STD2Nav_EU. It is possible how to activate it ?
You have Delphi unit. You need to find tutorial for Delphi unit and follow it.
@@mrfixpl Thanks for quick reply
@@mrfixpl
¿Conoces algún tutorial?
What does it mean when you say the unit must be patched?
Self-generated codes will be detected as invalid if unit is stock. patching is required to bypass this check mechanism.
@mrfixpl How do you patch it? I am trying to replace my unit now as my old one got damaged.
Hello. How can I patched my mib2 entry unit? Software version men2_eu_skgpx_p7381l.
Same question pls
Hello, everything you sayed works, but the Codes are unvalid. Why ist this so? I did the exact same steps as you
Was your unit patched first, as I said in the video and in the description below it?
My car has a vcrn of 9 figures instead of 10, somebody knows why?
Hi, is there an overview of the differences i patched from zr 378 to zr 478 and patched the system. But now i see version zr 480 , can i update to zr 480 and install the patch also, and are my modification with obdeleven still avaialble ?
Ooit een antwoord gekregen op jouw vraag? Ik zit met dezelfde vraag namelijk, ben vooral benieuwd naar de visuele verschillen.
Hello !
I bought last year a MIB2 STD 0245 on ebay. It has CP Bypassed and the VIN number is not the same as my car... Do you think it will work ?
Thank you !
There's a chance that your unit is patched for self-generated SWaP codes.
What phone mount is that? Lol
Check this one: ruclips.net/video/tPmdsCZpgqE/видео.html
Gdzie znajdę vcrn? Mam leona 2017 mib2 , proszę o pomoc :)
W szczegółach dowolnego zainstalowanego kodu.
@mr-fix, When I implemented this code, I couldn't use the navigation system. .. .. Do you know the cause?
Is the code visible in the hidden menu? Is it "valid"?
Hi MrFix sorry to comment on a old video, if I buy the First Gen White OBDEleven (Android) and pay for the subscription, can I do this?
Yes, OBDeleven for Android + PRO subscription is required to do this.
@@mrfixpl Thank you so much for replying, you should get affiliated/sponsored by them!
I've got MIB2, 0253T, patched all Fec/swap done and all valid. Performance monitor and all working but in Full Link I only have MirrorLink showing? No android auto or apple Carplay on the full link screen? Any ideas? I know I have to change the usb port for apple Carplay to work but it should still show surely.
Any help would be appreciated MrFix!
hello, I followed your procedure and even if I had 00060400 available as a code to unlock, once everything is done it tells me invalid code, you have a solution to give me, thank you very much
As said in the video and in the description below: codes will be recognized as invalid if the unit is not patched.
Hello
I did everything as in the video but the swap code is invalid
what did you do wrong?
You don't have a patched unit?
@@mrfixpl swap 00060300 not valid
what needs to be done for the code to be valid?
@@mrfixpl no
Me too i thought i had a patched unit (I have CP bypassed). I bought it from Poland on eBay. But is was not the case, the code for Performance Monitor is set as Invalid...
How to patched unit mib2
When I “slide to write” it just keeps loading. Also the “Current value” that’s already filled in on your screen just says “0” on my screens. Do you know how to fix this?😬
Maybe it has something to do with the “Security access” code you used in a previous video… The problem is that the code you used (20103) doesn’t work for me
nice vide that long generated code seems to be a long coding. If it's original, then OK but what happens if the orignal long coding is modified? is than function lost? have you verified or tried?
This is not long coding.
Can't reach the generator, is it offline or moved?
Hello good Morning! I consult you this modification can be done on a GOLF MK7.5 GTI? MY19 I have the OBDELEVEN version 1!
Enable hidden menu and check if code 00060400 is listed as supported.
@@mrfixpl would this be the correct video? "How to delete invalid FEC / SWaP code from MIB unit"
Hi, is there any reason why Delphi head unit are not supported?
Buongiorno ,io vorrei installare il performance monitor ma mettendo il fin dello stereo il codice e diverso da quello che dice il sito da lei consigliato ..grazie per l aiuto ❤
Hi
Can you please tell me how to change region navigation maps with obdeleven pro?
Thanks
You can't. You need to flash the unit with different region firmware first, patch it, install FEC codes for maps, and only then install new maps.
Hello, can i activate through OBD11 app connect and performance monitor on MIB 1 Discover Pro navigation? Thank you
Czy wykorzystujac ten generator mozliwe jest dodanie app connect do composition media z 2016 (wiekszy wyswietlacz)? Aktualnie nie mam na wyswietlaczu widocznego kafelka z app connectem. Czy jest jednak sprawa hardwarowa i wymaga to wymiany stacji w schowku?
Jeżeli w menu nie ma AppConnect, to jednostka go nie wspiera. Dodanie kodu tego nie zmieni.
Do you need OBDEleven credits to add codes to enable android auto? Or can this just be done with the obdeleven dongle.
No. You need PRO license.
i have a US gti but this is my firmware MEN2_EU_VWGPX_P7381L i cant seem to find a new version it;s an LG unit it says im trying to update the performance gauges
I have a Golf Mk7 but with a Discover Pro. My list of suported codes is empty, moreover, when I tap on an installed code VCRN, Date and FIN (not VIN?) are empty too... Strange?... Do you know how is it possible or why?
Thanks in advance
Have someone touched your unit? You retrofitted it?
@@mrfixpl No, the unit was installed directly by an VW workshop...
Hi MrFix, where do I get the firmware from to update my golf radio before running through this process? I believe it needs to be updated first. Thx
I need to patch my unit for long coding? i'll be gratefull if you can hel me
I don't understand your question.
It says function not available on my 7.5 gtd
Hello, Have you any idea why performance monitor not showing power figure in kW?
Maybe your engine does not support this feature and it's not sending the data.
Nice video, thanks!
I have a Golf 7.5 with MIB2 Discover Media (no pro!)
The MIB FEC/SWaP Code Generator requires a 10 digit VCRN
According to the detailed view of my installed codes, my VCRN appears to be only 9 digits (xx xx xx x xx)
What's happening here?
Me pasa exactamente lo mismo y no sé qué hacer
Do you know where i can get a vcrn code if i have no installed codes?
ruclips.net/video/H1ZhNsmWA_I/видео.html
amazin video, thank you for it.
good day, can you advise me? according to your instructions, I will do everything that is necessary, the new swap will be added to me as installed, but it does not work, it says on the radio that the code is invalid? Is there a way to solve it? Thank you for the answer
Instruction says that the system needs to be patched first. Otherwise codes will be marked as invalid.
thank you and can you advise me how? is it possible for me to master it too?? thank you@@mrfixpl
There are three types of systems: MHI2 by Harman, MST2 by Delphi, MST2 by Technisat/Preh. Check mib-helper.com for details.
Doesnt work for me
The VIN of my 2018 Golf is 18 characters long.
The Swap code generator website only supports 17 characters.
Can someone help the website does not work anymore
i got a hyundai elantra 2023 and i install performence monitoring in my andriod auto but the only probleme i got is the number is freeze they are all the time in zero some can help me
Can you help me with mib 1 - I want to unlock component's. how I can do it?
You should go to dealers and they will do it after they confirm that the unit is not listed as stolen.
@@mrfixpl Okay I will try
Ponoć w GTI performance 2015 roku nie było takich. Czy w tym roczniku w radiu Discovery pro jest możliwość odblokowania tej funkcji?
Ps.500 komentarz 🤪
Jeżeli jest system MIB2 (wersja softu zaczyna się od MHI2 lub MST2), to jednostka powinna wspierać te zegary. Tak właśnie było u mnie. MK7 2.0TDI 2015/16 z MIB2 (MST2) i zagadało.
W moim radiu po wjescu do menu serwisowe nie mam pozycji Function enabling codes
Hmi software h25.14.38_high2_EU
Więc chyba nie ma możliwości uruchomienia tych zegarów
Mhi2_er_vwg11_s2103
hello my friend what do you mean patched ?
Hi, I have used your AIO firmware for Seat Leon MIB2 with Harmann system. Problem is Android Auto. It worked when I initially installed it, but now does not any more. I thried different cables and 2-3 different Android phones. None of them work. Any recommended solution?
Great video, thanks. I have 3Q0 035 874A Head unit with MST2_EU_VW_ZR_P0252T software, and Mirrolink is available on it from before. Device is patched and I successfully installed 00060900 and 00060800 codes. Both codes are listed as Valid codes, but in Appconnect screen there is only Mirrorlink visible, and I can't connect Android phone successfully.
Do you have some valuable advice on this? Thanks in advance
ps. I used same method to activate sport mode, and it's successfully activated
@mr-fix
Get diagnostic tool like OBDeleven or VCDS, go to module 5F, adaptation, vehicle configuration, enable Apple and Google services.
Thanks @mr-fix this worked. Maybe you should add this to your tutorial?
Just a question, i checked my composition media and it has de code available for the navigation, but there no button for it, will it work if i install the code or without the button is futile to activate the code?
Hello, I want to PATCH my MIB2 (version: MST2_EU_VW_ZR_P0254T without navi) unit for SWaP. Maybe you can advise how to do it? THANKS for reply!
I'm unable to access the FEC generator website. Could you please share the link again?
@mr-fix Hi, how to return original VIN and VCRN to mib2? When I uploaded the patch my VIN and VCRN changed to different.
Hi man, you make me vary happy with this video. I own coposition media in my golf gti 2017 facelift ,so what I need to patch my unit. is it the firmware update like from your one video?
Hallo! My unit haved firmware mst2_eu_vw_zr_p0475t, should i use your generator swap codes or another suitable for my device? VW Touran 2018
@mrfixpl what does the "patched unit" means? toolbox installed or modified firmware (sw train)?
How patch MIB2??
Train version: MST2_VW_ZR_PO468t
Software version: H29.319.29.3_STD2Nav_EU
Mr fix , just bought a 2019 seat ateca.
How do I know if the mib 2 is patched?can I use OBDeleven to unlock apple car play to unlock the full ink or there a specific thing to make first?
My mib 2 has all kinds of features, I think that it might’ve been patch but no full link.
That code are incorect! all of them are same toghether!!!
Wait you are telling me I can get a FEC for Audi Connect? Wtf?
That can't be possible. I thought the car has to talk to the Audi servers before enabling the subscription...
Is it possible also on MHI2? Cause adaptation of release code for swap function is not available in my MHI2_ER_VWG11_S0255_2 (0121) :/
hello. thanks for the video. I checked on my superb3 for the installed codes, but when I enter to see details on any VALID codes, in details it says invalid. my car is brand new and never touched for any modificaiton. thank you
Hello! I have the old obdeleven, is that possible to do whith it or i have to have the new gen?
Should be possible with 1st gen device as well.
To get appconnect i can use this methode without mib2 patch?
Patch or dealer. There's no other option.
after a try of app-connect activation according to video in HW menu window it says INVALID, probably i need to patch my multimedia unit? how can it be done?
Hi, It is possible modify performance monitor to show real kilowatt value as my car was tuned and showing only stock value?I have golf 7.5gti
Hello, i update software finaly, it worked from SD card from USB it didnt worked, and i tried to add performance screen but code is invalid, idk why, and i tried to delete it but cannot delete it, any idea ? also my screen sometimes have phantom touches :(
Patch the system first. You have MHI2, MST2 Technisat or MST2 Delphi?
@@mrfixpl technisat
ruclips.net/video/a9uwYmBPc1Q/видео.html
@@mrfixpl amm, but i dont have navigation
Po wgraniu kodu pisze, że jest nieaktualny. Co może być przyczyną takiej rzeczy ???
Jednostka nie jest spatchowana.
@@mrfixpl Czy jak nie mogłem uruchomić trybu serwisowego (tam gdzie jest zielone menu) po wgraniu toolboxa pojawiła się możliwość edycji w trybie serwisowym (zielone menu) oznacza to, że jednostka została spatchowana..?
I did exactly what you did and i still didnt get the sport on my screen. It says invalid next to the code for preformance monitoring
When i finish everything, instaled codes write invalid,what is problem.The media is not navigation,is that reason?
Thanks!
Hi,need patch a mib 2.5?passat 2018.
Please take a look at More Incredible Bash
I have a Golf R mk7 and I followed all the instructions, but it appears that the code is incorrect. What should I do?
Witam jak w inny sposób znaleźć kod VCRN? Nie wyświetlają mi sie zainstalowane kody, dlatego nie mam możliwości odczytania VCRN. VW sharan do którego dokupiłem Media MIB STD2 PQ +/Nav sprzedający dostał ode mnie vin auta i jednostka działa w moim aucie, chciałbym dołożyć mu mirror link, ale z tego co czytam musze mieć w/w kod VCRN. Pomożesz?