Anycubic Photon M3 - Setup & Print
HTML-код
- Опубликовано: 25 авг 2024
- Getting started with the Anycubic Photon M3 resin 3d printer.
Buy it here: geni.us/ypWC7w...
Water washable resin: geni.us/FXJ2i
Recommended: geni.us/JustVlads
ANYCUBIC Photon M3 Resin 3D Printer, 7.6'' LCD SLA UV 3D Resin Printer with 4K+ Monochrome Screen, Protective Film, Fast Printing, Max Printing
The ANYCUBIC Photon M3 resin printer features 7.6" screen and can print up to max volume of 7.08" x 6.45" x 4.03", giving you more possibilities for your creations. Adds a replaceable anti-scratch film (an extra protective film is included for replacement) to effectively prevent liquids from leaking to the LCD screen.
Photon M3 4K+ monochrome resin printer help print clearer, finer surface textures. With a 400:1 screen contrast ratio, the fast printer perfectly prints models with sharp corners and delicate edges, and also greatly reduces residue in the resin tank.
Photon M3 resin printer fastest printing speed can reach 50mm/h, and the single-layer exposure curing time is as low as 1.5s. It only takes 2.5 hours to print a 12cm model, which is 2.5 times faster than other 2k resin printers, help get models faster.
Using the latest ANYCUBIC Light Turbo light source system, the LED lamp beads arranged in a matrix provide a powerful ultraviolet light source. The new build plate has a texturized checkerboard pattern that dramatically improves adhesion and print success rate.
Compared with other LCD 3D printers, the ANYCUBIC Photon M3 printer can achieve 30%-100% power adjustment, not only supports ordinary 405nm UV resin, but also supports special resin, compatible with more materials, UV power can be adjust according to resin needs.
My main channel @Just Vlad
As an Amazon Associate I earn from qualifying purchases
Buy Photon M3: geni.us/ypWC7wAEdit
Water washable resin: geni.us/FXJ2i
Recommended: geni.us/JustVlads
Ugh, had I taken fifteen minutes out of my life to watch this I could have avoided the issues I came across. Thank you for the super easy directions and answers to my questions!
Thanks for this. Just got this printer. After pressed the home button and Ieveled it, I adjust the movement up the z about .01mm so the drag wasn't so tight. But it wouldn't let me save the "z=0" setting because it said I have to use "home" mode. And when I went to home mode, the build plate sounded like it was continually going down and wasn't stopping. So I cancelled the "home" mode and raised it up and loosened screws then it finally worked with "home" mode.
Seems the screws have to be loosened (so it can adjust its position) for the "home" mode to work properly. But yeah, adjust to .01mm up didn't allow me to save the "z=0" since I adjusted after "home" mode.
nice video
Rad thanks
thank you
cool
My leveling paper always is stuck when Zi press home
Is the filter you use specific for resin? Or is it like a coffee filter?
Should i not use my curing and washing machine then? Or should i let it air dry then use the curing machine?
Oh i know this voice justvlad my main fdm 3d printer setup tutorial master now i have you doing resin im thinking getting 1 soon