Turbonator for shits and giggles does it work idk 5/20/2014 Update the turbonator works on my 2007 jeep wrangler X I did see a increase in hp and a increase on mpg not a huge difference but a 5+ mpg
@@SerpentBornOfficial you just said it would chug power from the engine meaning it wouldn’t be a “free energy motor”. also in this current arrangement, it can’t power anything because it’s only using the vacuum from the intake to spin up the turbine. adapting it to power a secondary unit would be possible but, i can’t see it making much power due to the lack of a strong vacuum force. any load would be enough to slow this to a stop, making this nothing but, an obstruction. in theory what you described makes sense but realistically, it just sounds like a vacuum powered turbo which doesn’t sound as viable as other proven ways of forcing induction or powering anything. modifying the turbine to work with a pulley/gears seems like more work than it’s worth, too.
Sorry this just showed up in my recommended lol but N47 BMW engines basically have this built into the intake pipe, it's static so it doesn't spin but it's made of brittle plastic and it's 100% what you said
You don't even have to be mechanically inclined to think through this one. A turbo wheel forces air into the intake and creates high pressure inside. This thing spins off the suction from the low pressure in your intake. Creates no high pressure aka no boost lol
Exelente producto, no agan caso a los comentarios negativos, yo le instale uno a mi carro y agarro tremenda potencia, con decirles que ahora mi carro vuela como el carro de Ron Wisly de Harry Potter cuando volaban por Howarth
That's a good point but it would have to be able to get there first I has to go through the throttle body and break up in smaller pieces before that happend
I was thinking about one of these, or something like it. Instead of putting it into your intake tube, I would adapt my trucks airbox intake hole, and cram this in there. This way, if/when the fan breaks, the pieces won't get sucked into the motor. For even more protection, putting a small metal cage in between your fan and the air filter. I'm sure this sounds complicated and confusing. I'm not great at explaining things sometimes.
What year civic? And just get a replacement air filter made form a better material than paper and that should help with gas mileage and restore back to stock hp but not much
5 mpg increase is pretty good for a jeep lol. Hell ill take 5 mpg increase in any car. I heard some people said they lost power and mpg when using one of these though
Don't listen to these haters. Alot of people have never ever tried these awesome mods before. You will definetly gain a tone of power off of these. My g35 is a tire shredder. I ofc installed 3 of these turbos to my intake side and you don't even need the filter anymore after this. I had went to get it dynod (even tho you don't really need a tune because it will add hp without further mods) and it gained 300hp bro. Like wtf I was so skeptical about this and I'm so glad I went with it. I went ahead and bought more for some of my other cars. I'm also starting to believe the more of these turbos you have you gain like 100 hp from each. I ofc only needed 3 because it already makes 525hp thanks to these awesome turbos. Good luck with your awesome builds dumbfcks
It ads horsepower. You have to place it between your airsensor and trottlebody.There it builds up pressure.I tested it. But the only thing is how long will it work without falling apart.If it falls apart it will suck it in into the trottlebody. And into your engine.
I just got the frame powder coated and am about to install the engine im going to try this on I’ll get back to you if it does anything or if it doesn’t
Better to cut a piece of tin that fits the intake hose and then cut and bend the inner area in the shape of non moving blades and the air will spiral and increase the airflow.
@@jetstream454 he's saying if it actually manages to move more CFM then the actual gains will be putting it before the mass air flow sensor because engines can adjust themselves incrementally wether they need to go a little more rich or more lean. So basically put this before your MAF and it might actually make the engine give you more fuel which will give you more power as I said if it's moving more air, wether this actually moves more air or not requires much deeper testing.
In my experience you will get a real performance boost if you rip that out and burn it with a map-gas torch and then get a real turbo kit like my car 👍🏿 stututututututututu
all imma say is if this worked so well why doesnt something that cost 5$ to make not come oem in everycar lol but i would prob buy to to mess around with haha
This will absolutely not add hp, more of an air restriction than anything. You will lose hp!!!. When that thing breaks apart and gets sucked up into manifold then engine its going to be horrible.
Lol yeah 5 mpg is awesome to have in my jeep but no I haven't lost any power but I don't have it in a stock in take either I put It in with a cold air intake so the increase could be from the air intake or the turbonator either way it works for me
Yep my trailblazer has 400000 mile gets 26 mpg to 30 used the turninator for 6 yrs now now no disadvantage at all 100 % + works great mine cost 18 bucks I've saved over 2000 in fuel screw the haters to scared to try it
@@rockytop4 im looking to try on my limcoln town car some guy stated he got way better mpg with this wich kind of makes sense in these big type of vehickes🤔
😂😂. Hay personas que piensan que poniendole in ventos Al carrosera mas rrapido la Gran Malloria de motores lla Traen la potensia anque le pogas 20 turbos no lesacas mas 😆😆😆😆
How about, think about whats gunna happen to your engine when that cheap 12 dollar Amazon special falls apart and your intake is wide open 😂 the results would be horrific friend.. I do not promote them, nor do they increase any horsepower or anything else. If anything it puts a draw on your engine to get that thing spinning. And when you let off the throttle your pushing air that dont need to be pushed because that thing is "spooled" if you would, but your intake is limiting the amount of air volume your engine gets anyways.. So the air goes no where but back threw where it came..
![Who Wrote a Short Story That Seriously Disturbed a Teacher? | Dirty Laundry x Smosh [Full Episode]](http://i.ytimg.com/vi/bvHAy_rKoEI/mqdefault.jpg)
When you can't afford a bolt on so you buy a slap in.
Underrated
@@Jordan-qq9mg they usually are, thanks bro 😉
Sleeper shit
+1 for this comment☠️
@@TheOBEYModdingClan and TOMMY GUN thank you lol
In my experience, you will get way more power if you REMOVE THE OBSTRUCTION!
@@benjamin4321 He thinks it saves fuel🤣
🤣🤣🤣🤣
Yesss, for sure!!
The best comentari
@@SerpentBornOfficial you just said it would chug power from the engine meaning it wouldn’t be a “free energy motor”. also in this current arrangement, it can’t power anything because it’s only using the vacuum from the intake to spin up the turbine. adapting it to power a secondary unit would be possible but, i can’t see it making much power due to the lack of a strong vacuum force. any load would be enough to slow this to a stop, making this nothing but, an obstruction. in theory what you described makes sense but realistically, it just sounds like a vacuum powered turbo which doesn’t sound as viable as other proven ways of forcing induction or powering anything. modifying the turbine to work with a pulley/gears seems like more work than it’s worth, too.
I heard this boosts your confidence to almost normal levels.
Reverse Turbocharger, the turbine is powered by the intake flow, and the compressor wheel compresses the exhaust gases for 1 million HP increase
expand them, and yeah, tha would increase efficiency
Sucks the exhaust gases not compresses
Dang it, I could only get to 999,999.
☝ Loser.
those things are even cooler when a fin breaks off and pieces of it get sucked into your engine.
+1
morningstaR x holy shit I didn't think of it that way
first thing that came to my mind
That's hard metal
It won't break lol
Sorry this just showed up in my recommended lol but N47 BMW engines basically have this built into the intake pipe, it's static so it doesn't spin but it's made of brittle plastic and it's 100% what you said
@@nahuelgalmarini117 ya air isnt going to do that
I saw an ad once that said these things increase hp by 30%. Real car logic shows that it actually decreases hp by 30%.
😂😂😂
🤣
You should fill the hole pipe with them for maximum turbo power
anyone with an IQ above 30 will know this does not increase power to your engine
Unless it's a civic you have to have the vetec to really take advantage of this intake turbine
Thats a fidget spinner for your intake.
That spinner must add like an extra 140hp but with the chrome elbow it's probably more realisticly adding 200hp 🤣😂
Pack it with ice and get 300
that is an extremely smooth engine. might be the camera, but I can't see any vibration at all.
You don't even have to be mechanically inclined to think through this one. A turbo wheel forces air into the intake and creates high pressure inside. This thing spins off the suction from the low pressure in your intake. Creates no high pressure aka no boost lol
Yep working off of negative pressure , probably a hp loss 📉 if anything lol
You'll really feel it kick in when it falls apart and adds it's plastic to your cylinders
"Improved piston to wall seal"
If it comes with a decal you get an extra 10% horsepower
If you put it on your trunk lid spoiler
Exelente producto, no agan caso a los comentarios negativos, yo le instale uno a mi carro y agarro tremenda potencia, con decirles que ahora mi carro vuela como el carro de Ron Wisly de Harry Potter cuando volaban por Howarth
No mms.
Sure... except your performance gain was psychological...
What happens when that fly’s through the intake and kisses your valves
That's a good point but it would have to be able to get there first I has to go through the throttle body and break up in smaller pieces before that happend
@@garystump5680 bearing’s take a shit on the plastic propeller it will explode in to small feasible peace’s
Pieces
It’ll probably get stuck in the air ways
damn.. this is masterpiece..
I was thinking about one of these, or something like it. Instead of putting it into your intake tube, I would adapt my trucks airbox intake hole, and cram this in there. This way, if/when the fan breaks, the pieces won't get sucked into the motor. For even more protection, putting a small metal cage in between your fan and the air filter. I'm sure this sounds complicated and confusing. I'm not great at explaining things sometimes.
Los ingenieros automotrices deben de estar revolcándose de la rabia
Yo this guy has never heard of the placebo effect
I remember my first beer
I'm thinking about getting one of these for my Honda Civic. How much horsepower did you gain?
None
Esto es mierda
Don't do it. 1. Its blocking airflow.
2. Once that cheap chinese plastic gets brittle from heat, itll break apart and your engine will eat it :)
@@longbow6416 no it wont
What year civic? And just get a replacement air filter made form a better material than paper and that should help with gas mileage and restore back to stock hp but not much
Turbonator ACTIVATED
Anybody remember the 'tornado' vortex sheet metal POS that youd stick in your air box or under the air cleaner?
I do!
Those no work.
Ford put something like that in its f150 ecoboost engines to make them quieter
"0-60 in what 3.5 years?" lightning mcqueen
Why it sounds like circular saw?
if you transmit that sucket powered motion to an expander into the exhaust gases, you'll win.
5 mpg increase is pretty good for a jeep lol. Hell ill take 5 mpg increase in any car. I heard some people said they lost power and mpg when using one of these though
😂😂😂 sick !!!! Obviously works wonders !
Don't listen to these haters. Alot of people have never ever tried these awesome mods before. You will definetly gain a tone of power off of these. My g35 is a tire shredder. I ofc installed 3 of these turbos to my intake side and you don't even need the filter anymore after this. I had went to get it dynod (even tho you don't really need a tune because it will add hp without further mods) and it gained 300hp bro. Like wtf I was so skeptical about this and I'm so glad I went with it. I went ahead and bought more for some of my other cars. I'm also starting to believe the more of these turbos you have you gain like 100 hp from each. I ofc only needed 3 because it already makes 525hp thanks to these awesome turbos. Good luck with your awesome builds dumbfcks
@@Monz117 he has to be
You will have better luck with a high output leaf lower straped to the top of your roof now that's how you make real power
@@Monz117 you'd have to be brain dead literally to think he's serious
It ads horsepower. You have to place it between your airsensor and trottlebody.There it builds up pressure.I tested it. But the only thing is how long will it work without falling apart.If it falls apart it will suck it in into the trottlebody. And into your engine.
When spinners for your wheels aren't enough you get one for your intake 😆
Total scam but I wonder what they’d do on a 2-stroke, I’m gonna try it on my blaster….for science!
It did smth?
I just got the frame powder coated and am about to install the engine im going to try this on I’ll get back to you if it does anything or if it doesn’t
@@hhstarwars ok
Dude... A delta fan is more useful than this shit
@@hhstarwars so did it do anything it's been a month 😂😂
now that’s how you twist that air, those little things are good for only one thing, the trash
Finally a fidget spinner for my truck!
i cannot believe ppl used to do ts it’s like if u made a turbo but without everything that makes it a turbo and then made it sound horrible
Awesome intake charger. 😎👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼👏👏👏👏👏👏👏😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼👏👏👏👏👏👏👏👏👏👏💪🏼
i found one of these at a house a moved into, great fun with a compressor nozzle but i would not put it on an engine intake haha
that's crappy is only doing is blocking the air and loosing power and wasting money
Better to cut a piece of tin that fits the intake hose and then cut and bend the inner area in the shape of non moving blades and the air will spiral and increase the airflow.
More Air means more fuel 🙄 if you install it before the sensor and it sucks more air so the sensor will tell the system to inject more fuel.
What
@@jetstream454 he's saying if it actually manages to move more CFM then the actual gains will be putting it before the mass air flow sensor because engines can adjust themselves incrementally wether they need to go a little more rich or more lean. So basically put this before your MAF and it might actually make the engine give you more fuel which will give you more power as I said if it's moving more air, wether this actually moves more air or not requires much deeper testing.
In my experience you will get a real performance boost if you rip that out and burn it with a map-gas torch and then get a real turbo kit like my car 👍🏿 stututututututututu
The swirl idea only works After introducing fuel, you would have been better off buying a cheap bottle of whiskey lol.
Which way the fun has to face to the motor or out?
Spinny thing make car go brrrrr
Air stoper?
Yooo thats sick
Seems like a bad thing to have if the plastic explodes then 🍃💨🚒👷 you know
leaf blower on the intake?
Oh yeah, add some turbulence to your intake, that's exactly what every engine wants.
How’s about take it off and stop blocking air intake. This will throw off MAF’s and slightly decrease gas mileage.
It would be better to add an fuel aditive also supreme fuel also don't forget to add air in the tires you would get more speed.
AWESOME
That’s a restriction lol
Where's that "HaHa" reaction button..
-10 horsepower
Yay more intake restrictions please!
It would look way cooler glue to the button of your baseball hat , Js . Probably be more efficient to 🤷♂️
What if u put 2??? Lol
all imma say is if this worked so well why doesnt something that cost 5$ to make not come oem in everycar lol but i would prob buy to to mess around with haha
This will absolutely not add hp, more of an air restriction than anything. You will lose hp!!!. When that thing breaks apart and gets sucked up into manifold then engine its going to be horrible.
There is zero chance this increased horsepower or fuel economy.
Lol yeah 5 mpg is awesome to have in my jeep but no I haven't lost any power but I don't have it in a stock in take either I put It in with a cold air intake so the increase could be from the air intake or the turbonator either way it works for me
The intake only...the turbonator is just another restriction
Yep my trailblazer has 400000 mile gets 26 mpg to 30 used the turninator for 6 yrs now now no disadvantage at all 100 % + works great mine cost 18 bucks I've saved over 2000 in fuel screw the haters to scared to try it
How can it POSSIBLY be because of that fan thing?
@@rockytop4 Holy fuck 🤦♂️
@@rockytop4 im looking to try on my limcoln town car some guy stated he got way better mpg with this wich kind of makes sense in these big type of vehickes🤔
loss of power are you like 16 yrs old that does nothing for power
Why don't we buy turbo insted
These things Turbulate the air bcz gas Vapor Burns Not the Liquid & These things make more Vapor 2 Burn More Efficiently
Please don't be serious
@@jetstream454 Yes I Was , They Worked for me, You Don't have to believe it & You don't Have To Argue either. It is as it is.
Just seen a video of someone testing this and the car actually lost 10bhp
It does not work, you got scammed
eso no sirve para nada. yo compre uno y lo instale pero es ena perdida de dinero
This is a replica of a child wind turbine toy. Just blow an air and it will turn.. Cant find an explanation how it boost your car power.
Ah yes
ULTRAIDIOTIZM
Think that’s cool? Just wait until that non lubricated bearing shits itself
biggest waste of money
😂😂. Hay personas que piensan que poniendole in ventos Al carrosera mas rrapido la Gran Malloria de motores lla Traen la potensia anque le pogas 20 turbos no lesacas mas 😆😆😆😆
put a real turbine difference
How about, think about whats gunna happen to your engine when that cheap 12 dollar Amazon special falls apart and your intake is wide open 😂 the results would be horrific friend.. I do not promote them, nor do they increase any horsepower or anything else. If anything it puts a draw on your engine to get that thing spinning. And when you let off the throttle your pushing air that dont need to be pushed because that thing is "spooled" if you would, but your intake is limiting the amount of air volume your engine gets anyways.. So the air goes no where but back threw where it came..
1000hp+
and i quote.."(Turbonator has)Unproven claims not backed by any proven mechanics or data... really works??...fact or fiction??
Probably one of the dumbest items ever made for a car serves no purpose only makes engine run worse and run risk of catastrophic failure
What in Betty crocker BS is this 😂
I wish you luck if that will fall apart and pieces will go into engine 😳
wouldn't be the best if that cheap plastic exploded and got sucked into the engine
lo tengo de adorno en mi casa. no sirve debes acelerarlo demasiado xD
This will shatter and destroy your engine. These pathetic little bearings can't handle the force....
where i can buy that
Why would you ever get that it makes you lose performance
berapa harga ny buat disel bisa gak??
airflow drop a lot,
Só serve para tirar o desempenho do motor.
No 5 plus bud lol. -12Hp. Atleast lol
Turbinka kowalskiego 😂
🇲🇨👍👍👍👍👍🍀🌏
Que bosta !
Ganhou uns 120 cavalos amenos?
En serio ayuda a la potencia del motor?
No
No eso no sirve para nada ni ahorra Gasolina ni gaitas
Шляпа.....,😁
*
it's a toy no practical use
🤣🤣🤣🤣🤣
LooL 😂🤣
FRAUD! YOUR NOT BELUGA! 😄
DUMP
Mate w.t.f. not only is that blocking the airflow when the barring fail and they will your engine will be toast sling it in the bin p.d.q😅😅😅