Is it possible to map a button on either the gimbal or the phone app that can trigger the AF on/off function on the Sony? This would be super useful without a follow focus.
Hi I have CRNAE-M2 Firmware V2.02_20200626162225 and Update_ILCE6500V106 and it says identification fail either way with QR and passsword . Any ideas ?
Can you track faces or bodies using the camera a6400 video as source with this App. I have seen tracking mode using a mobile camera as source located over the hot shoe but as I am planning to use a camera that is reaching maximun size, I would prefer to use camera video as source. Do you think , is it possible?.
i hava a canon m100 camera and zihyun crane m2 ..... but camera is not connect to the gimble... the eror is the "camera identification failed" please help me if u know
same here: ... just to let you know that the a6500 with the sony latest remote app does not connect to the zyplay app at all . it says identification fail or identifies the sony a6500 either as panasonic or gopro.... and a6500 stays in infinit loop of attempting to connect...
Mohit Hoskote hey guys! Just updated my Zhiyun Crane M2 firmware to version 2.0 via my ZY App and now both the Sony A6500 and M50 have received updates and are now able to work! Will be coming up with a video for the Sony A6500 on the update. 😀
Thank you for the informative video on setting up the crane m2. I have watched numerous video including yours, but I still couldn't establish a connection (QR Code or password manually). I have the latest firmware of v2.02. my camera is a zv1. don't know what else to do and i have spent hours on this already. so frustrating
Fatima Nyc hey guys! Just updated my Zhiyun Crane M2 firmware to version 2.0 via my ZY App and now both the Sony A6500 and M50 have received updates and are now able to work! Will be coming up with a video for the Sony A6500 on the update. 😀
@@TreeTanksDev Hi I have CRNAE-M2 Firmware V2.02_20200626162225 and Update_ILCE6500V106 and it says identification fail either way with QR and passsword
@@TreeTanksDevYes, the connection was successful. But I cant use cine4 or log profile while connecting through app. So I want to connect it another way ...
This gimbal is great WHEN it works. The rest of the time it is an absolute piece of useless shit. Won’t connect to the app now. I spend more time troubleshooting than actually using it! AVOID!
this ! is no doubt the best video on crane 2 out there
Thanks!
I struggled with connectivity until I found your video. Thanks!
Excellent tutorial. Works for SONY Zv1-e10 too.
I have done it!Thanks, and thank you for showing the bug of the app. I was getting crazy that it was me!!! I balance my zhiyun crane m2 thanks to you!
You're welcome! =)
How do you do it for the a6400? A6400 doesnt have an "application" tab or an item "application list" on any of the other tabs or sub tabs
You ever figure out how to do this ? I’m struggling
@Malik Dabney dude i just figure it out. Go to Network, and choose "ctrl w/ smartphone and click connection, then you will see what you want.
@@babyfacesluggzz6659 Bro, just go to Network, and choose "ctrl w/ smartphone and click connection,
Passenger im still tryna sync my camera to the gimbal !! I need help imma try the smart phone thing too! Or is that the same place for both ?
@@nicholas4915 It still doesn't work on mine!!
Hi is the crane m2s Wifi compatible. I don’t see the Wifi icon at the top for some reason ..
The same, have you find a solution??? I want to connect my camera😢
How do you connect a6000?
do u know if there's a new app because I can't find it in app store? I'm having trouble linking to A6400.
Can you please do a video on the Crane M2 and insta360 one RS bluetooth setup.. Balancing was easy. Can't get Bluetooth to work. Thx
what is your heaviest lens that can M2 support?
Is it possible to map a button on either the gimbal or the phone app that can trigger the AF on/off function on the Sony?
This would be super useful without a follow focus.
Hi I have CRNAE-M2 Firmware V2.02_20200626162225 and Update_ILCE6500V106 and it says identification fail either way with QR and passsword . Any ideas ?
same
Can you track faces or bodies using the camera a6400 video as source with this App. I have seen tracking mode using a mobile camera as source located over the hot shoe but as I am planning to use a camera that is reaching maximun size, I would prefer to use camera video as source. Do you think , is it possible?.
i hava a canon m100 camera and zihyun crane m2 ..... but camera is not connect to the gimble... the eror is the "camera identification failed" please help me if u know
same here: ... just to let you know that the a6500 with the sony latest remote app does not connect to the zyplay app at all . it says identification fail or identifies the sony a6500 either as panasonic or gopro.... and a6500 stays in infinit loop of attempting to connect...
Akos Simon thanks for sharing!
i have the same problem with my a6300
kris7477 oh noo! That sucks. thanks for sharing!
Same issue with my canon m50 after establishing the connection it still shows manually identifying.....; Upgrading
Mohit Hoskote hey guys! Just updated my Zhiyun Crane M2 firmware to version 2.0 via my ZY App and now both the Sony A6500 and M50 have received updates and are now able to work! Will be coming up with a video for the Sony A6500 on the update. 😀
hi,is this possible in weebill lab ? can zoom a6400 using weebill lab ?
Thank you for the informative video on setting up the crane m2. I have watched numerous video including yours, but I still couldn't establish a connection (QR Code or password manually). I have the latest firmware of v2.02. my camera is a zv1. don't know what else to do and i have spent hours on this already. so frustrating
How about a6400? I still cant figure it out..
What issues do you have with the a6400?
Hi, could you please confirm whether the crane m2 can do object tracking?
Le, Vu Uy hey there! Yes it can via the Zhiyun play app!
Thank you for your advice! I found your videos are the most helpful and comprehensive!
Le, Vu Uy you’re welcome!
Can it do object tracking with the the Sony A6300?
hey just to let you know that the a6500 with the sony latest remote app does not connect to the zyplay app at all . it says identification fail
Hey there! Meaning the new firmware upgrade for the Sony A6500 is not supported by the Crane m2? Thanks for sharing! then i wont update my a6500. =)
Fatima Nyc hey guys! Just updated my Zhiyun Crane M2 firmware to version 2.0 via my ZY App and now both the Sony A6500 and M50 have received updates and are now able to work! Will be coming up with a video for the Sony A6500 on the update. 😀
@@TreeTanksDev Hi I have CRNAE-M2 Firmware V2.02_20200626162225 and Update_ILCE6500V106 and it says identification fail either way with QR and passsword
Is there a way to see the camera screen through the app?
No unfortunately cant
Hello you can make a video to connect a nikon z50
The nikon z50 is not on the compatibility list but will try
Hello could you please make a tutorial about how to connect it with a6300 via cable? Regards
Devjyoti Roy hey there! The crane m2 doesnt come with any cables in the box. Have you tried using wifi to connect to your a6300?
@@TreeTanksDevYes, the connection was successful. But I cant use cine4 or log profile while connecting through app. So I want to connect it another way ...
Devjyoti Roy hey I own crane M2 that I used along with A6400 and found it no problem with using the picture profiles! What happened with yours?
The ZY Play App doesn't exist in the google play store, what now?
What's the App's name??
Zy play
The app doesn't have the crane 2 in it anymore.....
Plain functions do not work. Cannot take a simple snapshot. W and T functions don't work.
That didn't take long to run into an issue, My ZY Play doesn't have the M2 as an option to connect to. lol
Swipe right till you see Pro Cameras. Then click top left icon and it will show all the gimbals. Select Crane m2
TreeTanksDev thanks! That did it. Works great now. Thank you for taking the time to reply
Yeah mine won't even connect on the first step :(
My scan QR code just says "parameter failed" and does nothing lol what a joke
how to do it in an a6000 you can't !!!!
there appears no qr code to connect.... you should not be doing these videos.
This gimbal is great WHEN it works. The rest of the time it is an absolute piece of useless shit. Won’t connect to the app now. I spend more time troubleshooting than actually using it! AVOID!