I have a series idea for you , "Rate my Rigs" you do a video like this of each of your rigs and let us viewers rate your rigs in the comments. This little hot rod rig is definitely one of my favorites of yours ! 9 out of 10 🤘😎
1) Those Tattu batteries are great, been using them for months myself. 2) You should absolutely move the servo back and run that grill. Maybe flesh out the sides of the front clip a little with some styrene as well. 3) I say paint it either hot rod red, or black with flames. Awesome new spot, great video!
The hot rod is cool lookin and a good crawler. That spot of rocks is sick lots of fun there I bet. Most of the rock in n/e ny are rounded. I have some great crawling but the rocks look better there. 🤨 Thanks so much for another great vid 24Yep 🫡
OMG i am so excited i just found my First BOULDER to crawl. LOoks good from the Road. And it is Right in Town at a Park. Drove by and almost wrecked. LOL
Dude! That spot looks wicked! Love it! So many of the spots where I live are covered in a six inch shag carpet of moss. The coastline has pretty clean rock, but the wooded areas are just too mossy.
U can use small cheap 3s brushed esc's on the rams. 1 esc for the boom and 1 for the lift. Then run the esc's to a separate channel on receiver. Thats how i did my flatbed tow truck and my double deck trailer ramps
Love the wheel and tyre choice . What a great little rig .think weathering the body would be good as the flames look cool . Grill yes rear bumper maby . Driver needs a beard. ( Use the splity drivers one ) 👍
Hi, Rock Hunting Machine, The build is mint. Love the approach and departure angles.👍🏻 Can't wait to see how it evolves. Has it survived to one wheel challenge?.😜😂 The new rocks look great apart from people being there.😄
Old school is the best school. I love the video and build. Feels like those tires should have a whitewall on them with those wheels would look like the old racers. Keep it up. Also, can you get her to rate it when you're done?
Lovein' the hot rod! 🔥💯🤙🏾😎 Sometimes I wish I lived closer to the mountains, however I can't do the cold hence I live on the beach. 🤪 You definitely can't beat the price of those Tattu 300mah lipos. They're perfect for tight spaces. (Tattu is made by Gens Ace)
I think you had the same problem i did last weekend. Drive 2 hrs to new spot and was overwhelmed at the lines. There were so many possibilities, i couldnt stay focused on one spot.
Is that the nano bam motor? How do you like it compared with the SMP? I'm thinking my bronco needs to go brushless. I want super slow crawl with a little extra wheel speed
Hey man love the videos great stuff. You have some great places to crawl. How many rigs do you have, I’m up to 16 😂but I keep finding different ways to build them up. 👍
SCX24TEN- Ordered a set straight away and was low key hoping the zuki body would drop. Trey can you get WT Micro to have an option to add the scale hardware? I went to his link provided and the shipping quote was $62 for $13 hardware so binned that idea
@ A lot of them end up being pretty much the same smoothness depending on the esc paired with it. Orange pancake from mofo rc I love and is super smooth
That’s a awesome spot and cool rig
Love that build you killed it!
Favorite part is the heavy breathing and wheezing while looking at that breathtaking view😂
Hey, we can't help that we breathing issues!
😂
What a beauty spot!!! Cool rock hunt vid, the hot rod is sweeet!!! Rock on 👍
The rock-a-billy driver is sick 🤣..good video man..love it.
Love the solid wheels and new rocks❤
👍👍 this is going to be awesome love that rig yeah old-school body style
I have a series idea for you , "Rate my Rigs" you do a video like this of each of your rigs and let us viewers rate your rigs in the comments.
This little hot rod rig is definitely one of my favorites of yours !
9 out of 10 🤘😎
Haha thank you!!
1) Those Tattu batteries are great, been using them for months myself.
2) You should absolutely move the servo back and run that grill. Maybe flesh out the sides of the front clip a little with some styrene as well.
3) I say paint it either hot rod red, or black with flames.
Awesome new spot, great video!
The hot rod is cool lookin and a good crawler.
That spot of rocks is sick lots of fun there I bet. Most of the rock in n/e ny are rounded. I have some great crawling
but the rocks look better there. 🤨
Thanks so much for another great vid 24Yep 🫡
What a sick spot! Awesome vid
Check out the rocks off of 322 Lancaster PA at pumping Station Road go up the horseshoe trail just a bit and check out what’s on the left
OMG i am so excited i just found my First BOULDER to crawl. LOoks good from the Road. And it is Right in Town at a Park. Drove by and almost wrecked. LOL
@@JamesDirtRC LOL
Dude! That spot looks wicked! Love it! So many of the spots where I live are covered in a six inch shag carpet of moss. The coastline has pretty clean rock, but the wooded areas are just too mossy.
You might try stiffer springs or just adding some preload to the rear shocks to help with the front end lift (weight will definitely be a bigger heel)
Never really believed in heaven.... but my man I think you've found it! 🎉🎉🎉
I love the parking lot paranoia. 😂
OH i like that one. IT is Coming along nicely.
I also love running those batteries. Great size and good runtime. Perfect to hide 🤘🏼
Love the spot cool truck great episode 🤘✌️
Ok I’m on the hunt for that hot rod body now 🙃
Super cool video, super cool spot, sick build…happy halloween y’all ✌🏻✌🏻
When imagine the perfect crawler spot. This is it. Such a bad ass video. 🙏
U can use small cheap 3s brushed esc's on the rams. 1 esc for the boom and 1 for the lift. Then run the esc's to a separate channel on receiver. Thats how i did my flatbed tow truck and my double deck trailer ramps
Karnage needs to offer those wood panels for the wagon!! I'd love them for mine.
dude that spot is amazing
what a sick crawl spot
That was an awesome spot. 😮😮😮. I’m a lot bit jealous!! You should definitely leave the paint job. Maybe just patina it up a lil bit.
Those wheels desperately need moondiscs ! 🌚🌚🌚
Love the wheel and tyre choice . What a great little rig .think weathering the body would be good as the flames look cool . Grill yes rear bumper maby . Driver needs a beard. ( Use the splity drivers one ) 👍
man I need to find more spots
Hi, Rock Hunting Machine,
The build is mint. Love the approach and departure angles.👍🏻
Can't wait to see how it evolves. Has it survived to one wheel challenge?.😜😂
The new rocks look great apart from people being there.😄
@@R.Sole88109 Hasnt tried the one wheeler yet!
Old school is the best school. I love the video and build. Feels like those tires should have a whitewall on them with those wheels would look like the old racers. Keep it up. Also, can you get her to rate it when you're done?
Will do!
Lovein' the hot rod! 🔥💯🤙🏾😎
Sometimes I wish I lived closer to the mountains, however I can't do the cold hence I live on the beach. 🤪
You definitely can't beat the price of those Tattu 300mah lipos. They're perfect for tight spaces.
(Tattu is made by Gens Ace)
41.9225 degrees north by -78.930833 degrees West. Your channel rocks. Can't wait for the next video
The meus axles are going to be sweet! They are body killers lol.
Guy need to pay more attention! Just staring at ya while pulling the hardest lines! Sheesh!
Happy Thursday Boys!
🥰
And Friday to the rest of us in southern hemisphere 🙌🏻
Nice 🔥💯
I think its sweet man 👍
TELL ME I GOT IT BIG DAWG!!!😂😂
I think you had the same problem i did last weekend. Drive 2 hrs to new spot and was overwhelmed at the lines. There were so many possibilities, i couldnt stay focused on one spot.
Yep!
Use the treal brass knuckles and rear axle weight those don’t rub
Is that the nano bam motor? How do you like it compared with the SMP? I'm thinking my bronco needs to go brushless. I want super slow crawl with a little extra wheel speed
Very nice! I still think red wheels would pop on that build. I would lose my mind over rocks like that.
Calling it right now before I even watch the video
Lat: 69
Long:420
Nailed it
Hey man love the videos great stuff. You have some great places to crawl. How many rigs do you have, I’m up to 16 😂but I keep finding different ways to build them up. 👍
Haha way too many!! I need to soon do a purge
Happy Halloween 🎃 200th like 💪
Thoughts on the trepadors in comparison to black labels?
@@horsepower3187 both are good, I like them both
Cool
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
I have a spot similar to this about 15min from my house. I seen a bunch of great lines for both 1/24 and my 1/10.
wait for a long time
SCX24TEN- Ordered a set straight away and was low key hoping the zuki body would drop.
Trey can you get WT Micro to have an option to add the scale hardware? I went to his link provided and the shipping quote was $62 for $13 hardware so binned that idea
Dang thats crazy... I'll let him know 👌🏻
@ appreciate it 🙏🏻
42° North -79°west
5hr drive from my house😮
35 mins from mine
Question for ya, have u tried any of the new Mofo Micro Bam Motors?
@@seniorxj2931 i have not. I have older mofo brushless ones and like them
@24Yepp in your opinion, what's the smoothest 1/24 brushless motor? Also, what's your favorite? Tks!
@ A lot of them end up being pretty much the same smoothness depending on the esc paired with it. Orange pancake from mofo rc I love and is super smooth
I have to have that body !!!!
Dude, WHA!!!!???!?? Hope that dude gets busted that ripped people off! Good thing you were the first with the goods.
40 deg 04'05.03" N 77deg 04'54.09"W
20 clicks north 47 clicks south
@@Thegreatpnw_rc 🤔
Hammond rocks 40.0681° N, 77.2486° W
Northwest
dude i just don't have rock formations like this
What's up Trey 40 degrees n 77 degrees w
Love your videos keep it up 😁👍 I hope to get a rig done soon and sent for you to roast it's a poor boy style 😂
What, no costume. What kind of Halloween is this?
I've failed you all 😔
Earths flat. No more than 6000 years old.
So you're telling me dude continue to sell all of his stuff to other people but didn't even have it to sell what are true piece of s***
40.0681463°N, -77.2485942°W ; Approx. Elevation: 1,499 feet (457 meters) ;
Do I at least get a set of Fuffer Nutters? 😂
40.068N, 77.2486 W
40.06820425725225, -77.24871708550413 exact entrance.
40.0681° N, 77.2486° W theres your rock location lol
damn looks like i should have skipped through the video like the others lmao
I'll do more of these, more challenging ones
@@24Yepp its rare for me to catch a vid this early. plus i only have one rig so i got nothing to put the wheels on
40.06965° N, 77.25117° W
Hammond rocks . 41.9224dg - 78.930832 dw. love your crawler good video s
40.0681° N, 77.2486° W
40.0681° N, 77.2486° W
40.0681° N, 77.2486° W
40.06965° N, 77.25117° W