di pa naman yan ma overload. depende na yan sa safety officer kung i approve ba nya ang lift... but to make sure we must stick sa standard na up to 85% lang.
I think it is an awful lifting plan, you have not established the actual distance of the bundle in relation to the crane on site (this is a basic information), therefore, your calculations are factually incorrect. They are only correct if the bundle is inside your radial distance. Also, you have not established the type of lifting gear and confirmed its lifting capacity (Certifications), chains, webbing slings, etc. nor the angle. You did mention the points on the bundle, but not the recommended angle. It does not matter if it is basic, you still have to tell the crane supervisor or the crane operator, the type of lifting gear to be used. Someone is signing for the lifting permit, so act accordingly. I am an AP (Appointed Person) I do lift plans, but even if I am a crane operator, I would refuse your lift plan on site due to lack of information.
most useful vlog 👍️🇳🇵
Salamat sa info buddy. Naghahanda ako ngayon dahil may assessment ako ng Tower Crane NCII.
ur welcome buddy
ayos itong video na to sadik
Thanks dear for the great service
galeng tlaga mag turo ni ser keep it up
galing talaga ni ser mag turo
very creative idea kapatid thank you for sharing this
Ang galing mo Naman kuya thank you for sharing always
Salamat sa inyong mga tips idol. Dagdag kaalaman.
Sir Clint asked this question so please explain about this .
*how to generating lifting plans using Word and PowerPoint with drawing?
Nice bai very informative pwede na pang Aramco
hahahaha mi exit nko brodir kay mingaw na hihihih
Nice yan tay basta may ganyan madaling matatapos ang trabaho. Angelannbrent
ako ni praktisan KY mupalit ko Ani sa unitop hahaha
Para unsa ng lifting plan...sige ra man ko lift og mga stack of plates...😂😂😂
Would you like to send me the lifting plan sample....or format
Thanks, Mr Lifting Manager
Mag tuon ta ani boss para maka mao ta ani basen maka.palit tag mobile crane
How to get this file template ?
Sir San mo nakuha yon sa,, percent,, medyo mahirapan po ako.
Boss san mo kinuha ang 3.5 salamat
Hello Tatay I’d like to know if you can share the document about example.
Wow, you are one LAZZY person but here it is. www.topmech.com.my/images/truck-crane/Roughterrain+Crane.pdf
Sa type of crane dapat mobile telescopic o tower crane ba o EOT
same computation sir . mag depende na sa load chart
How to know
Weight of Rigging Lifting Equipment?.
SWL on each Lug ?
check TUV certificate
@@tataysproject9238 from where can I get the one.
Please provide any link if available. Please
@@hazee8089 TUV certificate are provided by a 3rd party contractor after finish inspection your equipment.
@@hazee8089 Wow, you are one LAZZY person, but here it is. www.topmech.com.my/images/truck-crane/Roughterrain+Crane.pdf
Dear thank you
Dear Sir.
this a great plan my friend thank you for sharing your tips
tin at peter journey lyf
Good evening po Tay. Tanong kulang po ano mangyari kapag nasa 87% na Yong kalabasan Ng Capacity po.
di pa naman yan ma overload. depende na yan sa safety officer kung i approve ba nya ang lift... but to make sure we must stick sa standard na up to 85% lang.
@@tataysproject9238 ahhh so 85% pababa Yong standard ba Tay? Kapag nasa 90% pataAs po ba overload na poba tawag don?
@@jelordgodinez4714 maski @ 86% idol mag alarm na ang crane.....yan kung nka ON ung overloading switch.
@@tataysproject9238 copy po Tay maraming salamat sa gabay po 😊
@@jelordgodinez4714 ur welcome always kapatid..
Master please teach me
pwede po kahingi soft copy., thanks
sori po dir nasa UAE po mga files ko nka bakasyon po ako ngaun.
bosing ko yan....don bedro...crane ko yan.....
ayg saba mo sikat nya ta mike .
@@tataysproject9238 hehehe...pila na kaha na kwarta ani sa you tube......kapalit jud binlod sir.
I think it is an awful lifting plan, you have not established the actual distance of the bundle in relation to the crane on site (this is a basic information), therefore, your calculations are factually incorrect. They are only correct if the bundle is inside your radial distance. Also, you have not established the type of lifting gear and confirmed its lifting capacity (Certifications), chains, webbing slings, etc. nor the angle.
You did mention the points on the bundle, but not the recommended angle.
It does not matter if it is basic, you still have to tell the crane supervisor or the crane operator, the type of lifting gear to be used.
Someone is signing for the lifting permit, so act accordingly.
I am an AP (Appointed Person) I do lift plans, but even if I am a crane operator, I would refuse your lift plan on site due to lack of information.
Natthi nayala😅
pwede po maka hingi ng soft copy ng lifting plan mo sir?
ako ni praktisan KY mupalit ko Ani sa unitop hahaha