Installing CONTROL ARMS to the Type R!!
HTML-код
- Опубликовано: 11 сен 2024
- Keep up to date by checking out my social media!
GET YOUR MERCH!: www.j3ese.co.uk/
- Check out my Instagram!
/ j3ese
- Use Code "J3ESE" at checkout for 10% off numberplates!
www.instagram....
THANKS FOR WATCHING!
SUBSCRIBE ;)
"These are so so clean"
I should bloody think so, they're brand new, right?
ZachTheStupidGamer you really are stupid.
Clean means nice in this case, just to be captain obvious.
@@AdxmTS I know what he means 😂
You must be ashamed of the Corsa c seeing how far is parked it from your house 😂
Had you paused at 4:49 and then when I hit play all everyone in the room heard was 'really good from behind' 😂
6:52 Little dig a Lee there 😂 Just messing, love you both ❤️
I’m loving the vids atm but I would like to see more on the corsa but good work keep it up
Your ment to use a Honda 10 point socket!!
The new bolts were just normal so it’s all good
One of them isn’t upside down, they’re all printed the exact same so when you put it on the left the logo is upside down. Don’t worry boys 😅
Jesse Collingham you should get a remap done 🤷♀️👍
E3rdo_24 Gough for what gain? Unless you’ve full exhaust and intake manifold and intake not much point
scottlaaa 1984 ask area Motorsport he’ll tell you
scottlaaa 1984 and at 0:53 they’re identical so having to flip one round to install on the left side is gonna make the logo flip...
I seen the photo of the video of it on a lift and then seen you getting the Jack out and thought this has epic fail written all over it.The arm text is upside down isn't it......I've changed arms on Honda's from year 2000 and all bolts fully snapped off pure rotten but you could have changed those on your drive with a breaker bar easy. Definitely get it tracked after fitting them.Often cheap arms come with shite bushes compared to stock too but they look good
I'd say one of them is upside down or you've been sent 2 of the same side, you can tell by the triangular pattern too.
That’s how they’re meant to be I’ve checked mate
Man like needs those arms for real 😂😂👊🏻👊🏻💯👌🏻🔥🔥
jesse 'so clean' collingham
RB182 haha yes!
Do you and Lee do everything together??
Invest in a good breaker bar anything can be undone, if there's thread lock on them use a heat gun on bolt first. Wish I had access to that 2 poster fitting gearbox on floor other day pain in arse
That's totally going to be me one day. Driving test tomorrow 😂
tom proudman good luck
@@harrycurtis2087 thanks man!
Did you pass then?
@@AdxmTS I did thanks
These look so clean Jesse loving this vids keep them coming 🙏 . I was in image garage today didn’t know it was round the corner from my college 🤷🏻♂️ . But keep these vids coming really enjoying them 👍
Look good.. shame they never thought about it when they put the brand name on them as the passenger side ones writing is upside down!! lol
I think if u spin them round the writing will be the right way round never seen them but no company would sell upside down logos
Sean andersen nah that’s just how they are mate
Thanks to you brembo discs on the ep3 and pads today .. your videos really help 👍😬
Apart from 'looking good' if someone can be bothered to look under your car what else do they actually do for the price of 300 smackers?
Really enjoyed this vid keep em coming!! 😊😊
Good to see you getting hands on, more videos like this please!
Lee needs to change the gold under his bonnet it doesn’t suit the wrap
Get the car undersealed or at least the back axle so at night it looks cleaner when lights are on it
Look well. Do they adjust the rear chamber or just look pretty
Could have just painted the original arms red🤔
Do they do anything different from the normal ones or just look nice.
Nice to see you getting brave and doing mods like this yourself im still on a similar level to you only way we get better is by doing it ourselves bro, keep up the awesome work man
No trackdays planned I hope, I’ve seen these snap with ease
POV drive about?
Would be super cool, if you got another rear bumper so you don’t ruin this one,cut it so that you can really see it from behind. Love that look. Just my opinion. Wicked video man.
You thought about doing underbody seal after rust sealing? Looking at doing this to my type S (super sleeper).
You need to make longer videos!!!
Yes Jesse ! Doing proper mods to the ep3
How much were they ? Looks mints
What socket number did you use?
with a small bumper cut they will look even better
Lovin the intro tune!!!!
Got the Skunk2 LCA on my Ep3. Makes it look so much better 😍
I had these and my logos were both fine, you’ve either put them on wrong (look at the triangular pattern) or you’ve been sent two of the same side.
I’ve checked with other people and they’ve said mine are the same as theirs even area Motorsport said the same
Arms look good man although I’m wondering whatever happened the the evo 9s 🤔 if i was you I would have taken the wheel spacers off new set of tyres and they would have sat really nice on the car
Best visual mod for these is mugen spoiler get one on
We always set the correct ‘trim height’ before tightening the bush bolts otherwise bushings will be stressed. Did u set them correctly? Looks fab thou
can you go into detail please
also you seem to know what your talking about, do you know what these control arms do to the car other than look nice?
Trim height is centre of wheel to wheel arch as on normal stance. U shud only tighten bush bolts when suspension is at normal ride height. And they are popular mod for fast/rally road driving as bushes are more hard.
@@zainbhadresa3366 Top man, respect m8 m9
Electric Impact gun and Impact sockets should be on your 'to buy' list.
Absolutely love them lad 👌🏻
Sick vid control arms look sick
Wouldn’t a blast of a plumbers torch help for loosening ???
They’re on the wrong way mate, u need to spin the left one over. Look great 👌
Check my recent post on my community tap that’s how they are
Where has the vxr gone
they look sick does this tighten the suspension?
Your should put Neons on the type r
Don't be giving him ideas, the stickers are bad enough
Looking clean lad
Was your hands!!!!!
Looking good bud :)
Now thaaatttsss better son, also trying to to do anything under the car on the floor is a flipping nightmare man i feel your pain.
🤣 did an ep3 clutch on just axle stands
Your rear toe will be out now mate, need to get it adjusted or you’ll get bad tyre wear etc..
Hi mate where did you buy the DME control arms do you have an internet link?
Tegiwa mate
What socket set you using bro ?
From lidl
Have u heard how Rosie is doing ? Still being looked after?
Looks smart that does
Nice vid bro
There on upside down 🙈😂😂😂🙈
That’s how they are...
Man like Chad Thats so you can read the logo when he looses it and ends up upside down in a ditch!
**TOP TIP** If you have to hammer a socket on....you have the wrong size 😂
@T om how is that wrong? Just think about it lol or look it up if needs be ;) you're welcome
Not the wrong size, bolt could be rounded so smacking a larger one in would make sense. Would eventually squeeze in so that its tight and you can get it off...
whatshisface because of dirt on the bolthead
@@BringMeToVids sooooooooo the wrong size then lmao
@@LOL-dq5iw not really, you clearly dont work on cars enough to come across a proper rounded out bolt that wont come off with the usual size
U live in Somersham??
Jesse, you need to think of a name for the EP3, as you no longer have Ruby the VXR dude.
Rosie lol
Hit up 6tw01 for any Honda parts lad, they’ll sort you right out
Clean
What do they even do
What do control arms do ?
Apart from the bling and the new rubber in the bushing, uprating them does nothing.
Didn't you use your breaker bar on the bolt? Excellent video 😁
Tried but didn’t have much room on the driveway
@@JesseCollingham ah yea remember in the video you saying lol duh 😝
Nice one Jessie
Bob on 👍
Where’s the corsa c
Another great video ⁉️
Laid in my hospital bed watching this cheered me right up 😂 drivers side spring snapped last night and ripped my tyre apart throwing me into a ditch, new car timr, maybe an ep3????
Does the lift not go up full height? Lol
Bumper delete just to see them now my son😉
Good video but stop touching your face every 10 seconds
seeing your ep3 and lee lockwoods evo together is car porn loving the videos lad
m8 i think the left one the badge is upside down on it 👍🏻
That’s how they are
Take the badges off
Hello Jesse great videos !
And your should do ruclips.net/video/9PPum9xvf1I/видео.html to your front headlights
How much is your insurance on that a month?
1700 annually
Jesse Collingham how many years you been driving then guess you have lots of no claims then 😂
Another sick video, any update on premiering theses uploads?
They look nice bit do they do much ? .....
Kind of, there lighter and probably poly bushed but doubt you'd notice much difference if any
No only look nice trust he needs a decent rear arb with decent bushes for anything to happen to handling or anything
What do these do? other than look nice lol
@@bigrichard2840 so whats the point of them? thought they might make it handle better?
@@bigrichard2840 oh
Yes bro 🏎️💥💥💥
They look good but bit of a pointless mod performance wise no better than the originals
Sick vid bro
There abit crap how the logo is
Upside down 🥴😂
Brad u still crack me up how many epwees we had now 🤣🤣
Karl Roberts maybe 20-30 hahah
Don’t know why they printed them like that :/
Yes Jesse 👊
At 3:24 you can See the wheel of my Alfa Romeo on the ramp on the right. You can See it later on in the video too when i was getting the exhaust done yesterday
andryk_ qv what alfa you got ?
will park Mito Quadrifoglio Verde. Theres a video of it on my channel
andryk_ qv nice i will check it out my dad has a giulia.
will park nice i like all alfa romeo s
andryk_ qv so do i !