Greetings and thanks so much. Worked perfectly and I re-formatted the card and did the shuffle on Mission Planner. Love you casual style! Kind regards...
5TH SUB, FIRST COMMENT. I REALLY APPRECIATE THE TIME YOU TAKE TO GO THROUGH ALL THE OPTIONS, RECOGNIZING ALL THE QUIRKS, DESIGN FLAWS AND WORK AROUNDS THAT ARE NECESSARY TO WORK THESE DEVICES. MOST OF THE EGG HEADS FLY THROUGH EVERYTHING ACTING LIKE ITS PERFECT, LEAVING ME WONDERING WHAT THE HELL I'M DOING WRONG. THANK YOU. DO YOU DO DIY VTOL AT ALL? HAVING A HARD TIME GETTING THE RADIO AND THE SOFTWARE AND THE PIXHAWK TO ALL WORK TOGETHER.
Wow so simple I really appreciate this simple procedure you are so easy to listen too, I have subscribed and liked because you are the Man I'm having trouble trying to get my pixhawk 2.1 black cube to work with Left throttle right throttle it only seems to work in RCPassthro so in this setting the auto pilot will not work so I'm now going to try to understand what I did wrong in my config settings
Hi Michael .... Great video, thanks for your time and effort. I've tried all your methods to reset my pixhawk but have been unsuccessful. I think, where the problem is, is that I set it as a "cube" pixhawk. All the resets I've tried have left it in that condition. Like to reset it back to factory settings/state to try setting it up again. Do you know of any method or do you think that I just may have bricked my pixhawk?
1) Powered the drone with 3s 2200mAh battery. 2) ESCs make initial sound(Don't know if anyone is not making). 3) After sometime, can see 2,3,4 motors rattling a bit with each beep, except motor 1 and no beep with motor 1 ESC. 4) Using Pixhawk, after arming when I fly the drone tilts on the motor 1 side, but motor1 rotates. 5) For this reason, I have lost my props of motor 1 twice. Please help.
Does this also work with QGroundControl? I am using a Mac and cannot get APM planner to work (flash Pixhawk firmware) and QGroundControl is a bit confusing so I am hesitant in flashing my Pixhawk. However, if I can just reflash if I flash incorrectly I can continue with my project.
tried rebooting reloading, resetting and everything. Pixhawk 2.4.8 No Big green light by arrow. No sound from speaker when starting up no status tones. Will not show compass or any signs of external sensors work. ??????
Hi, how are you? How can you help me? is the following in the initial screen the EKF stays all the time in red and when I put the accelerdor bumped the machine if it turns off remembering that the tests I am doing with it in the ground I do not know if this something has or will be that in flight will happen to same thing? thank you
Хобби
Greetings and thanks so much. Worked perfectly and I re-formatted the card and did the shuffle on Mission Planner. Love you casual style! Kind regards...
Hi Wesley, good video my pixhawk run correctly now ...due to your fourth method...thank's a lot
Have good flight
Philippe
Who's awesome!? You're awesome! Thanks for a great guide video.
Thank you, super helpful!
Hi. Wesley. Great video. You did not state whether the pixhawk has to be powered or not when resetting the two reset points
Yeah me too , do you find any solution ?
You are a man :)
Incedably helpful thank you so much.
5TH SUB, FIRST COMMENT. I REALLY APPRECIATE THE TIME YOU TAKE TO GO THROUGH ALL THE OPTIONS, RECOGNIZING ALL THE QUIRKS, DESIGN FLAWS AND WORK AROUNDS THAT ARE NECESSARY TO WORK THESE DEVICES. MOST OF THE EGG HEADS FLY THROUGH EVERYTHING ACTING LIKE ITS PERFECT, LEAVING ME WONDERING WHAT THE HELL I'M DOING WRONG. THANK YOU.
DO YOU DO DIY VTOL AT ALL? HAVING A HARD TIME GETTING THE RADIO AND THE SOFTWARE AND THE PIXHAWK TO ALL WORK TOGETHER.
watch the caps buddy
Love you brother!
Wow so simple I really appreciate this simple procedure you are so easy to listen too, I have subscribed and liked because you are the Man
I'm having trouble trying to get my pixhawk 2.1 black cube to work with Left throttle right throttle it only seems to work in RCPassthro so in this setting the auto pilot will not work so I'm now going to try to understand what I did wrong in my config settings
Hi Michael .... Great video, thanks for your time and effort. I've tried all your methods to reset my pixhawk but have been unsuccessful. I think, where the problem is, is that I set it as a "cube" pixhawk. All the resets I've tried have left it in that condition. Like to reset it back to factory settings/state to try setting it up again. Do you know of any method or do you think that I just may have bricked my pixhawk?
Sir my internal compass is not listed in compass can you please help
1) Powered the drone with 3s 2200mAh battery.
2) ESCs make initial sound(Don't know if anyone is not making).
3) After sometime, can see 2,3,4 motors rattling a bit with each beep, except motor 1 and no beep with motor 1 ESC.
4) Using Pixhawk, after arming when I fly the drone tilts on the motor 1 side, but motor1 rotates.
5) For this reason, I have lost my props of motor 1 twice. Please help.
Does this also work with QGroundControl? I am using a Mac and cannot get APM planner to work (flash Pixhawk firmware) and QGroundControl is a bit confusing so I am hesitant in flashing my Pixhawk. However, if I can just reflash if I flash incorrectly I can continue with my project.
tried rebooting reloading, resetting and everything. Pixhawk 2.4.8 No Big green light by arrow. No sound from speaker when starting up no status tones. Will not show compass or any signs of external sensors work. ??????
Hellow sir how are you? my pixhawk heartbeat loss how to solved?
Hi, how are you? How can you help me? is the following in the initial screen the EKF stays all the time in red and when I put the accelerdor bumped the machine if it turns off remembering that the tests I am doing with it in the ground I do not know if this something has or will be that in flight will happen to same thing? thank you
Bought a brand new pix hawk 2.4.8 out of the box and can’t get windows to even recognize it.
My pixhawk is trouble shooting can you help me ?
good one!
thanks!!
Thank you
My pixwhak 2.4.8 cub black sensor please help me
Has anyone been able to locate this manual anywhere on the web? Does anybody out there have a copy that they could upload somewhere?
Adamsın adam
Hello