Husky Pressure Washer HU80709 with Kohler Courage XT-7 173CC Carburetor and air filter replacement
HTML-код
- Опубликовано: 28 авг 2024
- Carburetor and air filter replacement on my Home Depot Husky HU80709 pressure washer, with a Kohler Courage XT-7 173CC engine.
Carburetor Part#: 14-853-22-S - amzn.to/2sJtCFq
Filter Part#: 14-083-09-S - amzn.to/2rRQena
Tools: Ratchet with extension and 10mm socket, needle nose pliers, and gloves.
Thank you for watching.
Found one of these in the dumpster and your video helped me out, Started right up after the new carb was installed. Thanks for posting.
Awesome. Thank you for taking the time to let us know the video helped you and congratulations on the find.
Great little home pressure washer!>>> Great little home pressure washer!>>> I use it to power wash my vinyl fence, deck, driveway and cars.*
I use it to power wash my vinyl fence, deck, driveway and cars.*
This thing has served me well through the years.
thanks! followed your instructions and removed it in 5 minutes (plus fuel drain time into a jar), I didn't want to use a clamp...
Nice! I am glad it helped you and best of luck to any future repairs you perform in the future.
Thank you for share your work, I have a problem with liquid gas,you know why ?
Hi it's me again I got good news finally I got the carburetor from eBay and I install it in to my machine and it does work perfectly. Now I have to look for the surprise where the hose on the intake air box.
And thank you for the link that you send it to me I found everything there but the problem is the parts that I need are not available and their warehouse
What you may want to try searching for is Kohler Courage XT-7 173 parts.
Dump ass
Thank you sir for this!
Thank you for watching and commenting.
I bought this machine for 10 bucks missing the carburetor and the airbox so I'm trying to rebuild it again so I need every part in this area.
So you said maybe on Amazon I can get the parts I'll try it's right now I'll let you know thank you
I see what you are saying now. I will try and help. I think you are only missing the black box part number right? I gave you the black box lid part number in my last reply. Do you have the throttle linkage and springs or are you missing those too?
Check out this link and see if it helps you, but make sure it is the right engine for the washer you have, www.partstree.com/parts/kohler-engines/engines-vertical/xt173-0095-kohler-xt-7-xt173-engine-courage-xt-tti-8-0-ft-lbs-gross-torque/air-intake-filtration/
You should get a fuel filter
good information thanks alot
Thank you.
I loved your video it was the best and I ordered a new carburetor for my power wash but I need to know the part number of the black air box which is before the carburetor so if you can tell me that I'll be thankful
I believe you are looking for part number, kohler 14 096 30
How is this carb holding up 3 years later? Thanks for the video
Wow...you seem really ->tense
The ending was an outtake, lol. I live just off a main thoroughfare, so it us usually very busy. To be honest, I have never cleaned a carburetor, only replaced. My feeling is, for the time and effort I would have to put into that little thing, I might as well replace with new.
Hi there
Great video.
Question: I have the same model as yours. Gas pours out. Do you have to replace the whole carburetor if just the fuel bowl is leaking? There is a ORing in the fuel bowl, gas leaking past that.
Thanks for your help.
Are you sure it is not the fuel line? I am working on a video with my chainsaw right now and it had the same issue will spilling fuel and it turned out to be the fuel line. You should not have to replace the carburetor for spilling fuel, unless the carb has a hole in it.
I misread your question. You should be able to just replace the gasket, may want to go ahead service the needle and internals to make sure there is no dirt in there.
Thank you so much for your time and, expertise. I will do as recommended by you. 😊
Thank you for the comments.
Hi I was wondering what part do I need for the power washer part. I’m missing the tip part for it. Can you help me
Are you talking about the nozzles?
Razor Bucks yes I brought one from a friend but it was just missing the tip
@@Junior-ue2wf Did you check ebay?
Razor Bucks I tried but I don’t know how to word it
I found all the part numbers that I need at Google Images but when I tried those numbers on eBay and homedepot.com I got bad luck I couldn't find anything there.
So what can I do
I have a couple of direct links in my Amazon affiliate links above in the video description. Are you just missing the air box?
I am missing those also thank you for understanding
What size is the fuel line? Anyone?
Kohler part number 25 111 40-S
nice video, but you didnt show us if it started up...lol
Thank you for posting that, I never thought to do a video follow-up on it. I will put one up this weekend, I need to clean my daughter's car anyway. Thank you for the comment. Watch for the video, I am going say your name in it.
h p Stor, the video is up, ruclips.net/video/lGs-gxzx4As/видео.html
You put the gasket on the wrong side!
How do you figure? It was put back on the same way it came off.
@@RazorBucks you put both gaskets, the large rectangular one and the small one, on the back of the carburetor and no gasket on the front.
@@neilconvey do you have a time stamp? This video is so old now, I must be missing it. The pressure washer does not leak fuel and I still have it, though it is on its last legs. I want to take it apart and check it. Thank you
@Razor Bucks 7:30 - 8:25 approx
@@neilconvey Thank you! I will review.
Glad you didn't try starting it to show people that it runs. Waste of video as always
Glad you posted a video showing everyone how it is done. Do you need you hand held everywhere you go? A reasonable person would think, if he is doing this, the machine works or why waste his time doing it.