How to Repair a Chipped Sink with Rust-Oleum | Easy DIY to Fix a Cracked and Chipped Porcelain Sink
HTML-код
- Опубликовано: 25 окт 2020
- Here is a simple straightforward video on how to repair a chipped kitchen sink using Rust-Oleum Appliance Epoxy spray. It's an easy DIY home repair on how to fix your cracked or chipped sink. Comment down below if you have any questions.
Don't forget to SUBSCRIBE!
FOLLOW ME ON INSTAGRAM: / dp_tubs
Products Used in Videos on this Channel:
Material Used:
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3nNUjXZ
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Bondo Red Cream Hardener: amzn.to/3oNs2S3
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.com/case-extra-s...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W
Tack Cloth: amzn.to/2Zks2yT
Rustoleum Appliance Spray White: amzn.to/3r8Iw8T Хобби
Saving people's deposit one day at a time! I appreciate you! My sink in the place I'm renting legit had a hairline crack and we want to fix it without loosing our deposit!
Perfect! Glad I can help!
@@DPTubs wat kind of putty is that
Amazing!! I had no idea this was so straight forward and easy!! This opens all kinds of opportunities!
Thank you!! This is the best video that I have seen on this so far.
This process works great for laminate cabinets that warp at the bottom. I've had great success using this exact technique, except for the paint, I did have to use a roller to give it a pro finish.
Thanks for the video. I was debating whether or not to replace my chipped sink or just repair it. This video was enough confirmation that my plan of using appliance epoxy (rather than tub and tile) would work because the "tub and tile" paint is actually more expensive than buying a new sink. The appliance paint is MUCH cheaper. I have used appliance epoxy on counter tops and it works really well, but I never tried it on a sink. I used JB Weld to fill in the holes and cracks and I just sanded it down. Hopefully it holds up and there are no chemical reactions with cleaners that will cause the paint to chip.
Great job Danny💜💜
Enjoyed watching this!
Excellent work!!!
Amazing job
Wow, it simply amazes me what you can do and how easy you make it look. Thanks for sharing. I will be looking forward to your next video until then I am keeping you and your's in my thoughts and prayers please stay safe, take care and God bless!
Thank you! Awesome job
This is great man .... I’ll be using this to fix a chip .... seriously looks better than new
Thanks for watching!
Great job!
Thanks for watching
Thank you for this vid.
So glad someone has done this already. A friend gave me the sink from his great grandparent's home and it has a couple of shallow chips in the back splash where the faucet & handles come through. After seeing how smooth a finish the appliance paint left on some old bed frames, I thought it should be perfect. Looks like yours came out looking like new.
That is awesome!
Thanks! Good job.
Thanks for watching James!
Thanks! I will try it today on my bathroom sink
Keep me posted
Thanks for this 👍
👍🏼
Thank you SO much!!!
Thanks 🙏
Great video! Would MH Ready Patch work in place of the Bondo?
Undetectable!! Wow u r the best💙
I appreciate you watching. See you in the next video!
This is a great video. I have a sink that looks identical to this, and the problem is in the exact same place. Looking forward to tackling the project. Do you happen to know where an alternative acid etch can be purchased? I checked with the Napco company and they only sell it in cases of quarts.
Wow, I would have returned it if it was damaged while shipping but this works too!
I think some contractors buy them damaged for next to nothing
@@PHILLIPSFamBam oh okay, makes sense
There are quite a few mor products in the list than you mentioned in the video, do you have a video on the minutia of using them and mixing them?
I used a chip repair kit but the color was way too bright.
You would think that if it was made for patching sinks, it should match. Right?
This looks like it might be a better color match.
THANKS!
What is the name of the acid wash you used? Please
Danny hi. Well the bondo & rust-o also work for repairs near a tub drain? Thank you for the thorough explanation & products you used - great video of before & after!
Yes! Without really seeing your repair I would say yes.
@@DPTubs. Hi! Old lady trying to help herself here! What do you acid wash with? What grit sand paper? Anything else I need to know?
Does it protect keeps hold,, and none toxic? For inside the sink holes or it it just estetics
wow that looks wonderful. great job just wondering what brand of putty did u use?
thank u by the way very helpful.
Bondo High Performance Putty..you can get it at Home Depot.
@@DPTubs thank you for the product info and for making and sharing this video. Those sinks look fantastic.
Great job. A little confused on the putty formulas you used b/c in your materials list you have more than one. Could you explain? TIA
They can both be used for same thing. One is a bit lighter to sand
Wow! You got amazing results with this method! I would like to try DIYing it. Can you clarify regarding the materials? There are a whole bunch of materials on the list that aren't mentioned in the video. How would those be incorporated? Thanks!
I will tag the products for the video if you still need
Thank you for the vid. I had almost the exact same issue as yourself with a cast iron sink being shipped to me damaged. After filling, sanding, and spray painting, the only issue I've run into is cleaning. I've been cleaning the sink and the spray paint is chipping away from the edges of the areas where I've sprayed. So now I have this line where you can see the original white coating of the sink and then the spray painted area that I can wear away more and more with each time I clean. Any advice? It hasn't been installed yet. I was thinking of sanding further along the sink and then spray painting further out so the entire top edge is covered with paint, but I don't know if that's ideal seeing as my original problem area is identical to yours: only the corner was damaged.
Maybe after spraying the epoxy and it drying you need to go back and apply a few layers of a sealer/fixative so the epoxy paint doesn't chip away
Dont waste your time and money with all that ( not chep)
Products . It's : hold the water until plumber leaves . At the
End , after all the hustle , you'll buy another sink for sure .
Hi there, what's product name? Is it avaliable in ivery color. Need to repair Priceline sink.
What kind of putty please. Is bond a good product to use?
Cool repair.
What putty did you use?
No primer or adhesion promoter?
I would use Napco gorilla grip or Topkote crosslink on the Bondo/epoxy and before the spray but that's me
Would it last if exposed to water? Bottom of bathroom sink for example?
How do you match the color and tone?
I live in Denmark, I cant find these products :/
What exactly is the all purpose putty called? Couldn't find it at our local hardware.
Bondo All Purpose Putty or Bondo High Performance Putty. Sells at Home Depot or Amazon. Check my communities tab for more information on materials used.
Question: How do I acid wash before applying putty? Please help, about to start this process today. Thank you
Put on the acid let is sit for 15 minutes and then rinse with cold water and dry. Then sand the surface and apply putty
great work! what brand of putty did you use?
Should be in the description: Bondo
Looks good! Which puddy did you use?
Bondo High Performance putty from Home Depot..the black and green can with the blue hardener
What brand did you use for the putty? And what store can I get it at?
Bondo and Home Depot or Lowe’s!
@@DPTubs awesome thanks man🤙 great job btw 🙌
I have small hairline cracks in the bathroom sink can you suggest which filler to use
All purpose putty (Bondo)
What's are that products can you give link to buy
For old bathtub?
what kind of acid wash should we use? our sink is in real bad shape. thank u
I want to know also!
Question, trying to repair sink, but the color of the sink is brown and there doesn’t seem to be any appliance epoxy that would match it. Which Rustoleum paint should I use?
That’s a hard one…you would have to test it out or order a custom color from a Reglazing supplier…if you can’t order you will have to hire a professional for access to custom colors that will hold up
Hey man, thank you so much for making this video. I threw a weird combination of chemicals down the toilet and the porcelain corroded. If I repair it the way you did, is there any risk of corroding the Epoxy? I use chlorine regularly to clean the toilet and I am a bit afraid to try your fixing method without knowing if there is a chance I will make things worse.
If it corrodes porcelain it will the reglaze
This is so helpful! my questions is if acid wash is necessary, and do you do it for only the area you're working on or the entire sink??
Acid wash is highly recommended for at least 1-2 inches around area
@@DPTubs Thank you!
With water holding on that pot (n spray withe)
Did you use the bondo all-purpose putty?
Yes
What color is this epoxy? White or biscuit? Thanks!
Comes in both colors
Wow, to me those didn't look repairable. You make it look like new again.
I'm confused in the description it shows you only using the reddish looking putty which you said you used but in your materials used in video in description there's like 7 or 8 different materials it says you used. Can you please explain that ? The epoxy spray paint is awesome I see that brand in video so I will need to buy that aswell.
Also is there a cheaper acid wash product that I can buy? The one in your description is like 175$
@@thecollector77 You can buy Bathworks Acid Etch
What is the name of the reddish looking Patty? Is it ordinary Blondeau? I wish you had been clear about that. Thanks!
Why appliance epoxy versus the tub and sink epoxy?
Because of the color
What do you do if someone touched up a new tub with appliance spray but it is bright white and is very obvious.?
You would have to Reglaze the whole tub so it all matches
@@DPTubs are you kidding?
Otherwise you have to try and find a color that matches the existing. That’s hard to do. Check out Rustoleum color options at Home Depot.
I am not sure if your tub is white or off white so hard to make a suggestion
Hey what’s the red stuff you used to fill the chip Is that Bondo?
Yes it’s Bondo All Purpose putty! I also like Bondo High Performance putty as well.
@@DPTubs Any difference between when to use Bondo all purpose vs Bondo High Performance?
Excellent job!! What if the color is not white?
You can order custom colors or tints
@@DPTubs and how do I go about getting a color match?
What brand of sink? Find the brand of sink and see what color it is. Sometimes they have touch up kits. Otherwise yiu have to find a Reglazer who can color tint and color match for you.
@@DPTubs do you have a contact number? It's not a sink. It's an old refrigerator
What's the name you use to fixed the chips?
Higher performance bondo
What is the putty ?
Will that putty work for plastic sinks?
Yes
What is the name of your all purpose putty?
Bondo!
Does it feel like it's porcelain?
Thanks for posting this. The info is very helpful. Just a comment from a viewer’s point of view, if I may? Why do you continuously move the camera around? It is distracting to watch and almost creates a feeling of motion sickness. The general tip for video capture is to let the action move not the camera. Otherwise, you made a good video. Cheers…😀
What is acid washing?
Bathworks Acid Etch
Whats up Danny
Hello Charles!
Had a problem making a separate comment so i used this way. WHAT TYPE OF PUTTY DID YOU USE? I HAVE TO FIX A CHIP IN MY TUB. Just an all purpose huh?
Do you think this process would work on a huge Crack on the top of my porcelain sink?
I appreciate the video. Thank you. FYI, the music is way too loud in proportion to your voice.
Fuk sake nice thANK U SO MUCH
Wots the putty?
Should be in the description. All purprose Putty Bondo or you can use High Performance Bondo
Just wondering wot our equivalent is here in NZ, is it like a builders bog?
I can’t justify downgrading the surface from porcelain to epoxy. Now I know to make sure the shipment is insured against damage.
Totally understand!
I neither have a sink, or a house. I keep saying that. My mother's sinks have been replaced years ago.
Rustoleum appliance paint will peel and chip off a tub in 2 or 3 years
Nope! Disagree. Not if the surface is prepared correctly and the surface is cared for properly. Combination of preparation and care for everything
Music volume at 9, voice at 7 = Ugh....BACKGROUND music should be just that- in the BACKGROUND....please consider this when making videos.
Ridiculous. If I received anything that was that badly damaged during shipping I would send it straight back rather than try to repair it.
I do this type of repair for many contractors and some actually even buy them damaged for next to nothing and then pay for the repair.
@@DPTubs or in a lot of cases the contractor damages and has you or I come and make a repair and say not to say anything to the homeowner
Ur video was giving me a headache moving around back and forth. I had to stop half way
Not really a tutorial or instructional video. More of a bragging video with a Rustoleum advertisement.
How did you guess? You are good. You have figured me out.