Cables ties or zip tie can help run the wires Thru the grommets. Use a zip tie / cable tie and electrical tape the wire onto the zip tie to help pull it thru. Use a long zip tie/cable tie.
The kit comes with the connectors already on. I just added a ring terminal to the black and slightly red cable. You can just strip it and wrap it around a piece of metal for ground
When you do the next one for the bit you struggled with getting through the rubber cover get a more coat hanger and cut it down and bend it then tape the cable to it and pull it through. Then put it in Ur tool box for later as you will need it again for another job. 👍
for the fuse box what location are those. The ones you have used for mine are empty blank not sure if it has power it only has one silver pin thing not 2
Mine were also blank. I think you just have one silver pin. Normally I’d test to see if it has power. But my Voltimeter broke. So I just guessed and it worked 😂
I don’t even own a golf just here to support janeya
Yaara you’re a legend
Same I’m just here for bald autoapna
Cables ties or zip tie can help run the wires Thru the grommets.
Use a zip tie / cable tie and electrical tape the wire onto the zip tie to help pull it thru.
Use a long zip tie/cable tie.
Thanks for the advice. Usually I have fish tape. But I had misplaced it somewhere
Lala, I love your videos I've watched them since your Saqib and Tariq and Liaqat videos ❤
Literally just ordered this camera and was looking for a video like this 👌🏻 great job
Thank you bro
Love the mk7 golf mods bro
Keep it up
@hsaghir7181 Thank you bro
That’s sick my bro
Ma sha allah bro keep it up
Jazakallah Khair Bro
Doing this to my mk7 golf R along with dash cam as theres too many janglies driving like lewis hamilton on leeds road
Definitely too many Jungli drivers
Good job bro 👍🏼
Does everything come in the kit? Including the grey spilt connectors for the quadlock?
Thanks bro
The kit comes with the connectors already on. I just added a ring terminal to the black and slightly red cable. You can just strip it and wrap it around a piece of metal for ground
@autoapna Thank you bhai 👍🏼
Janeya would have been easier feeding wires through tube grommet if you taped the cables to a metal rod/old coat hanger.
@@rizzla664 I normally use a fish wire. But had lost it before the video 😂
Still smashed it out Janeya specially in that weather.
Is it not just better and easier to put the camera where the number plate area is?
Much easier 😂 Would have taken 1/3 of the time
@ only massla is when u give the car a carwash the camera just turns black and messes up
bro will you still upload on zeshan sajid?
Ai oi janeya zaberdast video janaab
Thank You Yaara
Only if you understood what you was saying 😂 funny video and shown good contents
I'm wondering why both wires weren't taped together and run at the same time 🤔
Not enough space for both to fit in the hole. Tape comes off as the gap is too small.
@autoapna I meant from the front to the back of the car 👍
When you do the next one for the bit you struggled with getting through the rubber cover get a more coat hanger and cut it down and bend it then tape the cable to it and pull it through. Then put it in Ur tool box for later as you will need it again for another job. 👍
@ Thanks for the suggestion. I’ll remember for next time
for the fuse box what location are those. The ones you have used for mine are empty blank not sure if it has power it only has one silver pin thing not 2
Mine were also blank. I think you just have one silver pin. Normally I’d test to see if it has power. But my Voltimeter broke. So I just guessed and it worked 😂
Where do you buy this complete camera?
AliExpress - Link in video
Thanks @autoapnai have buy it 😊
When are you coming back
Have a Happy New Year Zeshan Sajid.
Thank you Janeya. You too!
Where’s your location
Please come back to zeshan sajid channel for ramadan
will this work on a 2013 mk7 golf?
Don’t see why not. Should work for both MK7/MK7.5
@autoapnaI was going to ask the same question as mines MIB1 not MIB2 like in the video.
Yo when will u upload on ur zeshan sajid channel
Ramadan 2025
How come it didnt need coding?
MIB detects it automatically
Bro own jdm or BMW or mercedes i will love you
Would this work for a 2017 Scirocco
Don’t think the Flip camera comes for the Scirocco. Just the standard number plate light rev cam