Walk around of the ShopSabre CNC plasma table.
HTML-код
- Опубликовано: 18 окт 2024
- Just a short walk around of the Shopsabre CNC plasma table and some of the options it has. There are a few reasons we chose this table and in this video we go into a few of those reasons.#SOTMETALWORKS #SHOPSABRE #Hypertherm
You guys do awesome work! I love this channel!!
Thanks so much man!
Great video thank you for posting 👍👍👍you’re blessed
Thanks for watching!
The place I worked had a DMS cnc. Did a lot of custom inlays and trim for high end furniture pieces.
hey man love your video just ordered a sidekick myself from shop sabre just waiting for it to be finnished and hopping its a good machine from all research ive done its the best option for me
No complaints from SOT headquarters!
I started watching your videos about 6 months ago and decided to get my own and like you said great customer service I do have a question about your metal etching what do you use and thanks great videos
First, thanks for the videos and sharing them.
Second, I was a shape cutting operator for several years and was curious about the amperage you have on that unit. We cut up to 1 1/2" with 200 amps.
Thanks again for sharing.
Great Question, will put that one in the video to come. However it is a 65 amp machine, says it will cut 3/4 but have not tried that yet.
Great idea for a video! Very informative!
You do awesome work. Been looking for a table for my business. Really considering a side kick 8 also.
That was great information! After that, Shop Sabre should give you a free table lol! How long do things take to cut? Maybe you could grab some samples of things that took a long time and things that were fast and easy. Maybe also talk about what makes something harder or easier to design, cut, clean up, etc... Thanks for another great video!
shout out from richmond ky. looking at buying a 5x10 sidekick combo. hopefully have it up and going by spring
Great walk around Junior!
Thanks Kirk. might be more to come in the future.
Awesome review man! Just ordered ours today, super stoked
Hope you enjoy it!
Nice Video. I appreciated how you actually do a walk around of it and show your set up. Just received my sidekick 8 as well and having a rough time pulling the hypertherm lead through the lower tracks. I'm about to take the whole assembly apart to get this through but thought Id see if you have any tips pulling the insulated wire through the tracks? Thanks in advance!
Had that problem also, the tops of those tracks snap loose with a little effort then you can lay your lead in there where you need it. than make sure everything fits in nicely before snapping them back in place . thanks for watching.
@@shootersoptiontargets Thanks for the intel. Just FYI- I was able to run the lead through the tracks after disassembly and as you suggested detaching the tracks. Did this on a sunday. Called ShopSabre Monday am just to check and was told NOT to run the torch lead through the tracks as the hyperthem manual suggested. They suggest to just zip tie it to the side of the tracks to lower any EMI. Would have been helpful to have that noted in their manual but all good now. Looking forward to more videos, keep up the good work.
Info packed video Junior, nice job!
How often do you have to replace your consumables on the plasma torch?
What is the table capacity for sheet stock? Looks like 5X10 foot in the videos....
Work safe, stay cool
Doug@ the "ranch"
Oh, i feel another video with these great questions! Thanks Doug.
Great walk around man.
I like your new toy. I was would if you do any special pricing for veterans. I need to get a couple signs made. What is the best way to get you to talk about signs.
Email normally works best, Shootersoptiontargets@gmail.com, thanks.
When you put the ground wire in the ground did you have to put it in cement ? Interesting video
That's an awesome machine!
How do you clean the parts out from under your table? I'm thinking about getting this plasma and was also looking at making the sides slanted and having a roll out bin underneath to clean out/ get parts from.
Great tour👍 Are you doing more signs than targets now?
Yes sir, more signs than targets now.
Connected through Pusa and thought I would check you out.
Were you sold on a plasma table right away, or did you concider a regular CNC. I've been looking a buying ShopSabre for about a week now.
ShopSabre made it easy and painless. their support team is like none other. Their were a lot of sleepless nights, but i feel over all we made the right choose with the sidekick 8. Business is great, now i just need more hours in the day! 😀
Great video.
Thanks Kathy appreciate the support.
Hey what’s my CVED in the trash??? Looked like a good piece!
the secret is out, lol.
Where about s are you located in the country I'm wanting to be getting a table set up for the winter and I'm not real computer wiz either I would like to talk to you after I get table setup thanks JOE
I’m thinking about getting a side kick 8 table also. What size is your compressor
Just a 60 gallon craftsman, sometimes it seems a little slow on building air. it does a fairly good job however.
@@shootersoptiontargets thanks for getting back. Hope to pick up a down draft table like yours soon. Great work.
@@justinsteele8399 shopsabre makes a great table. thanks so much.
You're the MAN !!!
No sir, i just try real hard with what i have.😀😀
Can you change the perimeters on your cutting software or do you have to buy new software from Sabre?
We can change programs if we need to.
Did you finance it?
Or cash up front?
Was new or used when you got it
I'm not big money so the bank had the finally say so, lol.
@@shootersoptiontargets me and you both lol
Nice video in a nutshell
What part of Kentucky, I just bought one and live in the Owensboro area.
I'm close to Brandenburg Tim, about 2 hours from Owensboro.
@@shootersoptiontargets im about an hour north of Bowling Green, ... looking at this same table, thx for the video
That's pretty cool@@BrightNite. we are about an hour and 40 min directly north of bowling green.
Biggest question I got is when are you selling it to me?
I'm ready, let's do it been wanting to spend more time riding the RZR. May charge a little extra for all the drawing files😀😀😀😀😀
S.O.T. Metalworks ohhh no. I just want it for personal use. I’ve got enough businesses for now.
I wanna see if your gonna narrate in " Russian" ? Lol. Press one for English, and two for the accent !!!!
Tom Del Casale it’s all I know comrade. I’ve been trying to learn your language but it’s dumb with or without vodkas.
For example, “I’m currently enjoying a light read. the book I’m reading seems familiar, it’s about saws, I feel like I’ve read it before but when I saw it on the shelf I picked it up, probably just as I did before. I wonder if it has anything to do with the cover being red? However being hardback the book certainly isn’t light at all.”
And we’re the drunk ones right?
@@JasonWorksAlot hahaha that's funny !!! In all seriousness though it would be very funny to press 2 for the accent don't ya think ?
What's the thickest you've cut with the 65?
we cut 1/2 inch a lot with no issues, about as thick as we get a chance to cut.
hows this do with .5-1' A36?
What do you used to load your material on your table
we have a small tractor with a loader for the thicker plates, but sign material gets loaded by hand. thanks for watching.
What program r u running on your table the charles
The program is Enroute, it seems to cover all the bases.
What size compressor are you running?
60 gallon crapsman for now. looking to upgrade in the near future.
@@shootersoptiontargets do you think 60gallon is good or 80 is better? due to compressor cycle time on off.
@@dangarcia7494 60 seems to work ok but it's the single stage compressor which will keep up but runs harder. i think a duel or triple stage compressor would work better and save time and money on electric. The best thing would be a screw compressor, but man they like to charge accordingly for those things $$$. Hope that helps in some small way.
@@shootersoptiontargets Definitely, Thanks for the input. Like your stuff buy the way!!!