Tire Regrooving Part 1
HTML-код
- Опубликовано: 1 дек 2018
- Finally made a new video. Thanks for all the support!!!
Rema Tip Top Regroover www.rematiptop.com/products/au...
Check out where I get my supplies.
www.myerstiresupply.com
www.floridatiresupply.com
Here is a link to the newer version of the regroover amzn.to/2yxr2GS 
Авто/Мото
More videos. Nice to have you back. Keep it coming
Good to see you back!
Nice to see you back! Your videos are great. I've learnt a lot from them.
Thanks! Glad to see the videos helping.
Sweet! Was just watching some your old stuff.
Good lesson; and keep them coming, I’ve learnt a lot about tires with your videos Bro!
Thanks!
I did this for ten years, 9 hours a day 6 days a week. I'm unbelievably fast and precise at this. When I started those guns had push button settings one through four. And the box was grey and the cord for the pistol grip was a lot skinnier. Then they came out with another gray one with the knob like that one and they were only 250 Watts but they still put out plenty of heat. Unless you looked for the absence of wear bars you would not be able to identify that mine had been grooved. Also if you had a nail and ding the blade a little bit you can take a small precision file and touch it up and get a little more use out of the blade. There's a limit to what you can do with the file but it will make it feel perfect again for a while if you didn't ding it up too bad.
Also you need to set something up to hold the tire properly. If you cantilever something off the side of a bench like a big board or a pipe and place the tire over it so it's kind of hanging there it makes it a lot easier.
I even made an arm on a hinge that swings down and helps hold it into place which you can raise and lower really quick. When you have the tire suspended a few inches off the ground it makes it easy to keep rotating it and make fast progress. Just setting the tire on the ground like that is very inefficient. It would even be better than nothing if you said it inside of a light truck tire that's just laying on the ground that will help hold it into place better.
You could use an axle spindle .
Its nice to see you working again man. I learned many things from you bro. Now i own a small flat tire repair shop in mexico south from tx, borther with presidio tx. Keep your videos coming.
It’s alway great to see another person succeed. Much success to you brother. Glad I could help. Thanks for the support!
This is great info! I’m in trucking school and wanted to learn about Regrooving tires
Good to see you back I’m an owner operator as well keep up the good work Matt M&o tireLLC Las Vegas Nevada
Matt Wolfgong I was just in Vegas for the SEMA show
Good too see your back
Thanks for sharing your video was helpful for my self .I appreciated.
Hey buddy nice to see u back and making some videos keep them coming
Just realized I forgot to add a piece of video smh I guess there will be an addition to this video lol
Glad your back!
Thanks
Dude it’s funny to see that some the slang we use at the slang we been using at our shop is somewhere else out there
Hey man, regresaste, he aprendido mucho de tus vídeos, bienvenido de nuevo.
Gracias!
Great video.
my old man has an old groover that was sitting in the old stable for probably years. . .
So i tried it on some groovables. and it started working right away.
But then button 3 stopped heating, then 2, 1, & 4.
It could be user error. but i'm wondering what inside may have went, and if it could be replaced.
Very well done. You were very eady to hear and understand. Nice and calm voice.. excellent
great to see you back brother, keep those videos coming and can you please make a video on your impact tool used for removing valve stems please... much thanks all the way from south auckland New Zealand👍🏽👍🏽
Thanks! Good to see my videos making it all over the world. I’ll keep it in mind for the next video.
TripleATireService thanks brother much apreciated and most definitely, iv been a big fan of yours for a few years now, i also am in the same line of work as yourself all the way on side of the world lol so keep up the great work and hope to hear from you soon brother!!
At what tread depth do you consider tire regrooving?
Where do you order your blades from ?
Awesome to see another vid, good video on regrovable ties, at work we sell our casings and just get recaps done when we need them, but my father owns two log truck trailers and wondering if buying a regrover would be worth managing 16 tires. Note that he don't sell casings or wants them recapped.
Now in his situation regrooving might be a great cost effective choice.
Thanks for returning
Thanks
Great info! Im grooving forklift tires and the issue im running into is, my blades are bending or deforming after 3 or 4 passes. Im guessing it has to do with temperature vs pressure required to make clean cuts. How do you determine the temperature for being effective and not ruining blades. Also, are there different quality or hardness in blades according to what type of tire you're grooving?
There is definitly different quality blades
Is this safe?
This is really weirdly satisfying
good. video thank you👏👏
Hi Dude Nice to see you again! Is it legal to truck use those tires in US .Im from Brazil and its a violation to roll that in here.
Hey ,if I want it hw can I get it can u help me.and hw much it costs
Is this worth doing for a small fleet? Mostly 4 and 550 4x4s and how do you figure the best depth to go ?
Most definitely. Assuming that they have 225/245 or 26570R19.5. I also forgot to mention not to do steer tires. Depending on how worn the tire is determines how deep you can go. If you have an old junk tire it would be good to practice on. Since I forgot to add a part to this video I will add a little more detail on the next including doing a 19.5.
Where are you located and can I ship tires to be grooved to you please let me know
How to deliver this machine
Can i avail that tools for tires
regroving
Where are you located bro? Im in NYC ill pay you to train me i want a box truck set up
"Per DOT when you regroove you need to be 2/32 above the steel casing." Ok, but how can you tell how deep to go?
Can the tire after being regroove be vulcanized/retread?
Nope
Why?
What a price sir???
Is there a tool to remove some nobbies on an off-roader tire (to lighten it and use it for sand)?
Not that know of
The same tool he was using we cut tires for truck pulling
God bless u bro
Thanks!
Dónde está este compa
Does a tire have to say regroovable , to regroove it, or can any tire be regroove.
Any tire can be regrooved but doesn't mean you should because of the design, Medium duty and bigger can be safely regrooved because they're designed that way for longevity, whereas a passenger car and light truck tire isn't designed for heavy weight over long distance it's not designed the same way, but competition wise it's fine
Still Alive!!! 👍🏼
Yes sir!
i want bey it pleas tell me where that
Email me
Fuck yeah! hatters keep it coming! I subscribed on your positive attitude. Grant Cardone says "Get you some haters if you ain't got any"
8:26 you are saying "you can whatever you want" which is not right.
You ought to regroove tires according to the instruction given by the manufacturer.
This can be found in the tires catalogues.
If you do whatever you want you can damage the tire and it will never be able to carry as much load as designed, not to mention the safety.
Your absolutely correct about following the manufacture’s guidelines. As for my comment it was to be taken as for the design of the regooved line your cutting. A strait line versus a small wavy line will not effect the tire as long as you are following the original tread pattern. If you regroove more lines than what the original tread pattern is than yes that can be a potential issue.
where are you from, sir?
U.S.A. Florida
@@TripleATireService Your vedio is nice.
I do this to my $30 steel toe boots from Wal-Mart
How can I buy this machine
I also need that machine
I want to be a tire guy one day man
Who tf aspires to be a tire guy dream bigger kid
@@bitcoochie4093 its a demanding profession that not alot of people can do and theres a ton of money out there if you wanna put in the work
ToGodBeTheGlory! There’s a ton of money in prostitution too doesn’t mean you should sell your asshole
Did you get into mechanicking ?
Where can bbn I get you email at?
tripleatireservice@gmail.com
Hola soy de chile
Hola
I need know how much is this machine hong hong dollars
Can you turn up your audio next time, i can barely hear you.
Nah he's too busy not brushing his teeth
@@repunklican1181 those are gold teeth
I use homemade tool 🙈
Now I know why tire blows up
Volume....
Can't hear you!
Regroovable and made in China should not be on the same tire
Next time please speak louder or keep the mic near.can hardly hear you.
Nice, just the volume is to low, maybe it's my damm beats or talk louder perrito....cool videos.
Thanks no the low volume is on my end
U need to speak up bro i could barely hear you!
Turn up your volume, moron.
Need to talk little louder next time
speak up
Shame about audio
get a mic omg
Mannn how much more can you talk
Wow that's a lot of work to scam someone out of $30 bucks for a used tire
You need to go to the dentist immediately your teeth are revolting
those are gold teeth i thought the same thing