Your videos helped me a lot, thank You! But could You make a "How to maintain" video (where, what and how to lube/grease) about this gun? It would be really great!
I already made a video like that for the smg8, it's old and the quality is not as good as new one but I said the basic. You should take a look at it and apply my advices for the p90. I think I will make a new one for m4 platform one day
Hey, I really like your video, it has helped me fix my mag leaks. But I ran into an issue that's my fault. My spring assembly with the follower shot out of the mag. And I can't find a part I'm missing, if it is even missing. How is it supposed to be oriented? No matter what I do it's not working.
I found the issue and solved it. The little spring shot out of the assembly. Luckily it didn't disappear lol. Now I just have to reseal my mag again. Didn't work, still leaks crazily.
That a shame, I'm mad against WE for this so bad magazine. If the sealant doesn't work, maybe it's because the internal of the valve is damaged... Try to check the leak origin by putting your mag under water
For the moment yes, you have to use lot of seal and restart if it's not work (I had to make it twice on the fill valve of one mag). Two rules, lot of seal and wait a long time for the drying :)
Ah, it doesn't hold... I don't know what to do. I used a lot of gasket maker, waited for 2 days before filling up with gas, but still leaks. It is a really painful mistake from WE...
Are you sure you used the good sealant? Do you apply the seal correctly? You have to use silicone sealant, the same used for tiles by example. If you want, go on Facebook and we can talk about it more easiliy
+julien le mercier salut c'est effectivement le premier truc à faire mais hélas sur ce modèle il faut les gros moyens. Après c'est loin d'être définitif ça s'enlève facilement ;)
un jeux d'enfant. au point que je ne comprenne pas que les gens s'en plaigne. c'est tellement du détail comparé aux soucis possible que une réplique. même les vrais armes ont des soucis 😄 alors une petite réparation qui nécessite aucun talent particulier faite en 30mn top chrono..
Humm bon faut quand même un peu de matos, de la patience et de la chance, c'est pas si facile ^^ mais quand on ajoute ça aux problèmes de la réplique (le P90 we en l'occurrence) ça fait beaucoup :p
Your videos helped me a lot, thank You!
But could You make a "How to maintain" video (where, what and how to lube/grease) about this gun? It would be really great!
I already made a video like that for the smg8, it's old and the quality is not as good as new one but I said the basic. You should take a look at it and apply my advices for the p90. I think I will make a new one for m4 platform one day
Thank You!
English subtitles added, enjoy!
Tu aime bien faire des petites pauses entre les mot :p Sa doit être pour le suspense !! Bonne vidéo merci :)
+Sergent Raud Mon cerveau est monté sur un Pentium 2 233mhz ^^ parfois je lag :)
Only need change some orings, and put some silicone grease. Gun will be works well.
Hey, I really like your video, it has helped me fix my mag leaks. But I ran into an issue that's my fault. My spring assembly with the follower shot out of the mag. And I can't find a part I'm missing, if it is even missing. How is it supposed to be oriented? No matter what I do it's not working.
Come on Facebook with pictures I will take a look ;)
I found the issue and solved it. The little spring shot out of the assembly. Luckily it didn't disappear lol. Now I just have to reseal my mag again. Didn't work, still leaks crazily.
That a shame, I'm mad against WE for this so bad magazine. If the sealant doesn't work, maybe it's because the internal of the valve is damaged... Try to check the leak origin by putting your mag under water
Does it hold? I tried it with gasket maker, but still leaking... I am really sad.:-(
For the moment yes, you have to use lot of seal and restart if it's not work (I had to make it twice on the fill valve of one mag). Two rules, lot of seal and wait a long time for the drying :)
Lot of seal, understood.:-)
Ah, it doesn't hold... I don't know what to do. I used a lot of gasket maker, waited for 2 days before filling up with gas, but still leaks. It is a really painful mistake from WE...
Are you sure you used the good sealant? Do you apply the seal correctly? You have to use silicone sealant, the same used for tiles by example. If you want, go on Facebook and we can talk about it more easiliy
Sorry, but how long did You wait exactly?
Court mais quesque c'est bon 😃 . Pourquoi ne pas mettre de la graisse silicone simplement !? C'est une solution quand même moins définitive non !?
+julien le mercier salut c'est effectivement le premier truc à faire mais hélas sur ce modèle il faut les gros moyens. Après c'est loin d'être définitif ça s'enlève facilement ;)
Vasriotaep - French GBBR Airsoft Player ok, est oui quand ji pense tu serre ça vraiment raisonnablement donc ça dois se démonté facilement.
un jeux d'enfant. au point que je ne comprenne pas que les gens s'en plaigne. c'est tellement du détail comparé aux soucis possible que une réplique. même les vrais armes ont des soucis 😄 alors une petite réparation qui nécessite aucun talent particulier faite en 30mn top chrono..
Humm bon faut quand même un peu de matos, de la patience et de la chance, c'est pas si facile ^^ mais quand on ajoute ça aux problèmes de la réplique (le P90 we en l'occurrence) ça fait beaucoup :p