Hey great video thanks. Would you also do a tutorial video on how to remove and replace the nozzle in the bolt assembly. I have half way through and cannot put it back together 🙃
Very informative video. I'll use it when my p90 gbbr leaks :P Have you left the sealant to fully cure? I also use a gasket maker(RTV) to fix gas tank leaks and it needs at least 24 hours to fully cure.
I'm glad you liked it. Hopefully you'll never need it but if so here it is. This one that I use is best to test it right after applying so the gas helps to shape and keep it in place. This is a car engine seal.
Hello, I have a P90 that’s HPA tapped with a leak coming from the little golden inlet valve that goes to the magazine. Do you know of anyway to fix this?
I'm not gonna help an HPA user..... just kidding. Honestly I never had issue in that valve, but the HPA tapped P90 I've seen here, the guy had that valve taken off and completely sealed. In his version he drilled the bottom of the inner reservoir for the HPA hose . Don't know if that information will help but ,for now is all I got. PS: you may be able to use may be able to use automotive high temperature silicone, could help you seal the leak.
Nunca peguei uma em mãos. Mexo somente com gbbrs. TB não tenho feedback de quem tenha . Melhor pessoa pra te dar essa informação é o nariga do canal "se liga no nariga". Tenho esse vídeo disponível em português TB caso tenha interesse.
@@g.p.airsoft tá show, vou perguntar pra ele, estou vendo seus vídeos, muito bom suas armas está de parabéns irmão. Estou começando agora no airosft e quero uma p90 de início, por isso que fiz a pergunta
nvm,not sure how or what I did but it just fixed itself,I really wish I knew what I did so other people would know,but I genuinely don't,only idea I have is make sure the trigger is pulled to the front?
@@yepthisaname usually I had some problem with the piece that keeps tension on the selector. It got out of place just as I were to put te second part of the plastic shell.
@@g.p.airsoft that's the same part that was giving me issues,but I'm 99% sure the reason why it wasn't going in was because the trigger wasn't pulled forward,but I honestly couldn't say what exactly I changed to fix it
@@g.p.airsoft bruh I just took it apart to put a piece back in that I didn't realize the first time and it's not going back in,do you know what you did to fix it?😭
Hey great video thanks. Would you also do a tutorial video on how to remove and replace the nozzle in the bolt assembly. I have half way through and cannot put it back together 🙃
Hi there. Thanks for watching. I can try to do that , never did yet tho.
Very informative video. I'll use it when my p90 gbbr leaks :P
Have you left the sealant to fully cure? I also use a gasket maker(RTV) to fix gas tank leaks and it needs at least 24 hours to fully cure.
I'm glad you liked it. Hopefully you'll never need it but if so here it is.
This one that I use is best to test it right after applying so the gas helps to shape and keep it in place. This is a car engine seal.
Hello, I have a P90 that’s HPA tapped with a leak coming from the little golden inlet valve that goes to the magazine. Do you know of anyway to fix this?
I'm not gonna help an HPA user..... just kidding. Honestly I never had issue in that valve, but the HPA tapped P90 I've seen here, the guy had that valve taken off and completely sealed. In his version he drilled the bottom of the inner reservoir for the HPA hose . Don't know if that information will help but ,for now is all I got.
PS: you may be able to use may be able to use automotive high temperature silicone, could help you seal the leak.
Você já viu a p90 da king arms ? Se já você considera uma qualidade boa ?
Nunca peguei uma em mãos. Mexo somente com gbbrs. TB não tenho feedback de quem tenha . Melhor pessoa pra te dar essa informação é o nariga do canal "se liga no nariga".
Tenho esse vídeo disponível em português TB caso tenha interesse.
@@g.p.airsoft tá show, vou perguntar pra ele, estou vendo seus vídeos, muito bom suas armas está de parabéns irmão. Estou começando agora no airosft e quero uma p90 de início, por isso que fiz a pergunta
man that fire selector is just not fitting in no matter what I do,I'm not even sure what I should change now
nvm,not sure how or what I did but it just fixed itself,I really wish I knew what I did so other people would know,but I genuinely don't,only idea I have is make sure the trigger is pulled to the front?
@@yepthisaname usually I had some problem with the piece that keeps tension on the selector. It got out of place just as I were to put te second part of the plastic shell.
@@g.p.airsoft that's the same part that was giving me issues,but I'm 99% sure the reason why it wasn't going in was because the trigger wasn't pulled forward,but I honestly couldn't say what exactly I changed to fix it
@@g.p.airsoft bruh I just took it apart to put a piece back in that I didn't realize the first time and it's not going back in,do you know what you did to fix it?😭
@@g.p.airsoft AHHHH nvm i found out,you have to put it in the hole on safety,then it goes it perfectly