yes, it is a very nice setup. my first "track saw" was home made. nothing at all like these new "tracks". it consisted of a scrap piece of ¼" hardboard 8" wide and a piece of scrap wood ¾" thick and 2" wide with 1 edge straight. attach the straight wood to the hardboard with screws. take your saw and run it down your track to set a precise distance from the blade to the edge of the saw. to use, place the cut edge on your marks, hold in place with a C-clamp at each end and cut away. inexpensive and right on the marks. time though to upgrade mine and add either 40 grit sandpaper or rubber strips to the bottom so i can store the clamps away. thanks for the idea on using rubber strips!
This is a valuable addition to my woodwork collection ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
Next to woodland ambiance, whales songs and bushcraft stuff this channel is simply relaxing me. No froth, no bloviating, no longueur. Always clean and safe workbench. Essential showing only. More power to your elbow! Grats!
Some videos have presenters who are masters at orally conveying their message. Some you can't stand to listen to their jibberish. Some have the perfect composition of the proper view, great lighting, steady camera; others don't. Your video was perfect in SO many ways. From an educator's perspective A+. I always challenge my grad students to do a silent presentation. It is hard. It requires planning and the ability to be the performer and viewer at the same time. You need to thank all the teachers who guided you to become a GREAT presenter! (in so many ways)
Fantastic job. I've been trying to think of a way of improving my timber saw guide with Aluminium. Your ideas are great. To stop dragging your saw power lead over the edge, throw it on your shoulder before you cut. Thanks for sharing.
it's hard to believe it doesnt ever move at all just with 2 pieces of hvac piping rubber.. but if it doesn't you are definitely the man! thanks for sharing!
By far one of the best diy saw tracks I've seen!(I've been researching to build my own, I think I'll copy yours 😉) I can tell your a perfectionist like myself, great video! Thanks!
ok finally a DIY track thats worth building,,, i won't lie , i will copy this and tell all my friends it was my design lol and 238 thumbs down , are you kidding me
The most elaborate shooter I've ever seen, you went to great lengths to make it run smooth. All you needed was a spritz or CRC heavy duty silicone. It's invisible, dries completely in 10 seconds, slick as can be. (don't get any overspray on the floor, or you'll slip)
@@1pcfred Yes, you don't spray it on your material, just a light spritz on your saw's sole plate. The pure stuff is not nasty, It's invisible and evaporates in 2-3 weeks and you have to re-apply. Back in the old days, wax with silicone was very nasty on wood, hard to get off. The pure stuff comes off wood if you set it in the sun a few hours or wipe with alcohol.
Добрый вечер! Синяя лента это кромка к ДСП плиты, а черная - уплотнитель под металлические профили) Покупал в строительном и мебельном магазинах соответственно.
Looks like I have a project this weekend. The only thing I might change (just because of the materials on hand) is stainless and going to a carbon fiber infilled plastic that I have handy.
You have to be one of the most intelligent carpenter on youtube i just love every thing you put up i will definitely make one of those Thank you very much lots of Irish luck for the future and keep those videos coming
Отличная конструкция! Возьму за основу, тоже нужна направляющая. Один вопрос - зачем нужен уголок? Алюминиевый швеллер заглублен в паз и посажен на клей, жесткости там и так хоть отбавляй...
I made a circular saw crosscut jig. It worked, but the saw sole plate was not parallel to the blade. It was not immediately obvious, but getting that right made huge difference. I like your idea but would stick the runner to the stainless plate with a PU sealant. There will be plenty of time to get it parallel before it cures.
C'est du bon travail mais pour moi, je serais en perte de profondeur de coupe!! La planche est trop épaisse !! Votre travail est très bon en tout cas!!👍👍👍👍👍
![[How to make a circular saw crosscut jig] Flip-up type (perpendicular fine adjustment function)](/img/1.gif)
yes, it is a very nice setup. my first "track saw" was home made. nothing at all like these new "tracks". it consisted of a scrap piece of ¼" hardboard 8" wide and a piece of scrap wood ¾" thick and 2" wide with 1 edge straight. attach the straight wood to the hardboard with screws. take your saw and run it down your track to set a precise distance from the blade to the edge of the saw. to use, place the cut edge on your marks, hold in place with a C-clamp at each end and cut away. inexpensive and right on the marks. time though to upgrade mine and add either 40 grit sandpaper or rubber strips to the bottom so i can store the clamps away. thanks for the idea on using rubber strips!
This is a valuable addition to my woodwork collection ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
Next to woodland ambiance, whales songs and bushcraft stuff this channel is simply relaxing me. No froth, no bloviating, no longueur. Always clean and safe workbench. Essential showing only. More power to your elbow! Grats!
Thanks)))
Some videos have presenters who are masters at orally conveying their message. Some you can't stand to listen to their jibberish. Some have the perfect composition of the proper view, great lighting, steady camera; others don't. Your video was perfect in SO many ways. From an educator's perspective A+. I always challenge my grad students to do a silent presentation. It is hard. It requires planning and the ability to be the performer and viewer at the same time. You need to thank all the teachers who guided you to become a GREAT presenter! (in so many ways)
Thanks a lot 😊😇🙏
Excelente trabajo que Dios lo bendiga por enseñarnos algo muy bueno. Saludos de Patzún Chimaltenango Guatemala.
Probably the first video of a DIY track saw that made the most sense to me. Good job and thanks for uploading this video.
Thanks a lot 😊
Fantastic job. I've been trying to think of a way of improving my timber saw guide with Aluminium. Your ideas are great.
To stop dragging your saw power lead over the edge, throw it on your shoulder before you cut.
Thanks for sharing.
Great ideas best track saw i've seen.thanks for sharing
it's hard to believe it doesnt ever move at all just with 2 pieces of hvac piping rubber.. but if it doesn't you are definitely the man! thanks for sharing!
excelente trabajo felicitaciones por difundir tus conocimientos
Really like this one. Seems much better built and sturdy. So far the best I have seen. Need to make one for my shop. Thanks for sharing this.
One of the nicest shop made track saws I've seen to date.
Best diy track that I have seen
Thanks a lot))
wow, many of the market famous manufacturers should envy you
😊😊😊
Отличная работа! У меня точно такая же пила; если дойдут руки и хватит таланта - нужно будет попробовать сделать подобную шину.
Really awesome track saw, that being said, the amount of time and materials used, could have had a decent knock-off track saw.
Wow, easily the best DIY track saw make, I've seen so far, great job.
Идея с кромкой, с резиновой полоской и салом, выше всех ПОХВАЛ !!!!!!!!!!!!! SUPER
Excelente herramienta. La copiaré para mi sierra. Felicitaciones.
Excellent tool. I will copy that for my circular saw. Congrats
Thanks you)
I never seen so many Clamps in my life !
Самая лучшая самодельная шина) Спасибо большое) У меня пила уже с пазами для шины, просто переверну алюминиевый профиль)
This is indeed the best DIY track saw video I have seen!
Thank you 😊 😊😊
By far one of the best diy saw tracks I've seen!(I've been researching to build my own, I think I'll copy yours 😉) I can tell your a perfectionist like myself, great video! Thanks!
you're a perfectionist?
@@TeaKayful
In English.
I agree on 100%
@@TeaKayful ya it's a curse at times lol, I want to make every detail perfect and it will keep me up at night if I can't 🤦♂️
@@TeaKayful LOL. He did not say in writing but just in his work.
Nicely done. A little more detail regarding materials and measurements will be a most welcomed addition
Awesome! VWDB = Very Well Done Bro
Muy buen trabajo 👍 👏 👌
This is realy a splendit idea.👏
Cheap, as long as you wish, and cheaper as from a retailer.
Willy from Belgium.
ok finally a DIY track thats worth building,,, i won't lie , i will copy this and tell all my friends it was my design lol and 238 thumbs down , are you kidding me
Yes, there are around 238 Unappreciating idiots around...
Всё гениальное просто. Спасибо!
Great job!🙏🥰👏👍
amazing jig thank you very much for the idea
Very clever - well done
This is very, very good
The most elaborate shooter I've ever seen, you went to great lengths to make it run smooth. All you needed was a spritz or CRC heavy duty silicone. It's invisible, dries completely in 10 seconds, slick as can be. (don't get any overspray on the floor, or you'll slip)
Silicone notoriously ruins wood finishes. So don't get any on any wood you plan on finishing.
@@1pcfred Yes, you don't spray it on your material, just a light spritz on your saw's sole plate. The pure stuff is not nasty, It's invisible and evaporates in 2-3 weeks and you have to re-apply. Back in the old days, wax with silicone was very nasty on wood, hard to get off. The pure stuff comes off wood if you set it in the sun a few hours or wipe with alcohol.
@@Bob_Adkins any speck that rubs on can cause fisheyes. Not always important. Not everything requires a fine finish.
You are a master.....i’m gonna follow your idea.....
best shop made saw track I've seen
Thank you))
- Excellent work ! ! ! Thanx 4 sharing.
Spot on!
Cool build anyway 👍👍👍👍👍
Excellent job.
Great idea! Maybe a material list would be helpful.
Hi! Thank you ☺️ Unfortunately I don’t have a material list for it 🙁
Good job à great idea
Very good idea
Nice project. Can you show how you made a piece to connect a hose dust colector?
Wow. Is Amazing good.
Best track saw build i've see yet.
Would it be possible to get a materials list for that great saw guide
wood, aluminium, a steel plate, plastic and rubber, glue and screws. no problem
Чудово!!Файна робота👍🏼
Wonderful!!!
Здравствуйте! А можно чуть подробнее о лентах... Скользящая и противоскользящая. Что за материалы и где искать? Заранее спасибо! Лайк!
Добрый вечер! Синяя лента это кромка к ДСП плиты, а черная - уплотнитель под металлические профили) Покупал в строительном и мебельном магазинах соответственно.
Congratilation, it's the better. Very easy.
Clever , very clever😎👍
Professional grade instalation.The most essential track saw guide i've ever seen.My congatulations !!! @Mr.Vereshcack
Nice use of the rubber tape!
Хорошая реализация!!! и скользит пила по ПВХ, и нескользкая подошва шины, и сама приставка на пилу добротная!!
Brilliant Job! And very simple as well. Easily adapted with another plate for a router! Cool!
Thank you!)
Thank you!)
You started the video exactly as me in my workshop. This track saw was made for me. Starting doing one right now..
Come al solito sei un genio!
grazie 😊😊😊
Excellent video !
Thanks))))
The rubber is a great idea!!! Thanks for inspiring me!
Thats a pretty sick track
Nice... simple is great....
Looks like I have a project this weekend. The only thing I might change (just because of the materials on hand) is stainless and going to a carbon fiber infilled plastic that I have handy.
Interesting to look 😊
Great design for your track saw. I also like your work bench with the holes for hold down clamps. You just got a new subscriber my friend.
Thanks 😊
Beautiful it's so what I wanna looking for
EXCELENTE haré una para mi cortadora, gracias por enseñar, muy bien
Gracias)
The best DIY I ever see. Congrats. 👏👏👏👏👏
Отлично получилось!!!
Thanks for the nice and light product. Where do you live, by the way?
This is what I am talking about!! Thank you good sir!
Very good job! Thank u 4 sharing with us!
You have to be one of the most intelligent carpenter on youtube i just love every thing you put up i will definitely make one of those Thank you very much lots of Irish luck for the future and keep those videos coming
Thank you 😊💪
Great thanks
Esse camarada manja na marcenaria !!!!
Completely brilliant - I loved this hack.
Золотые руки!!! Молодчина!!! Лайк!!!
Отличное видео
Bro, you are creative and talented!
Thanks)
Nice work bro!
Very clean workshop...
Great turn out.....
fantástica guía ,
gracias pronto haré mi guía así
Muy bueno!!!
Gracias!)
Those are very nice saw guides. Congratulations😁
Прикольный стул из коленвала.
Отличная конструкция! Возьму за основу, тоже нужна направляющая. Один вопрос - зачем нужен уголок? Алюминиевый швеллер заглублен в паз и посажен на клей, жесткости там и так хоть отбавляй...
Спасибо!) я его дал для дополнительной жесткости, но ты прав - он там впринципе не нужен)
Excellent
*Cool* - I like the steel plate best, for easy detachment of the saw. Very versatile.
excelente congratulation !!!!!
Très bonne idée pour les rails !! Surtout quand on voit le prix que ça coûte. C'est toujours un plaisir de regarder tes vidéos ! 😉
Merci beaucoup)))
Cool Idea Dude! I like it!
Wow, top notch quality and ideas. Very nice video. I hope to copy this real soon. Need to get some supplies first. I don't want to skimp on any of it.
Thank you) Good luck 😊👍
Very nice track 👍 which Makita model saw is it you have? Is that the HS7601J?
Subscriber after first vid. Even tho I was asked in the simplest way right at the end of the vid
За описание на русском отдельное спасибо Бро!!! Лайк подписка!!!)
I made a circular saw crosscut jig. It worked, but the saw sole plate was not parallel to the blade. It was not immediately obvious, but getting that right made huge difference. I like your idea but would stick the runner to the stainless plate with a PU sealant. There will be plenty of time to get it parallel before it cures.
C'est du bon travail mais pour moi, je serais en perte de profondeur de coupe!! La planche est trop épaisse !! Votre travail est très bon en tout cas!!👍👍👍👍👍
Nice! That PVC edging is a good idea.
Very nice build :)
Thanks))
great job, love it