Hello and thank you for contacting us! For us to better assist you, please send us a direct email to marketing@costex.com so that one of our representatives can contact you directly. Thank you!
I made the mistake of following this and had to do it over because they left the part about the two small o rings for the oil return. That sucked big time.
Good afternoon,Thank you for contacting us. For any inquiries or questions, please contact us via email at:socialmedia@costex.comMarketing@costex.comThank you!
looks like that chinese head from jereh ....reinforced ribs, more nickel content,thicker deck....comes with a promised to be the solution for cracked heads....
I think you misspoke. You said 10 outside and 16 inside bolts but viewing the video a few times I'm counting 16 outside and 10 inside bolts. unless you count the 4 side bolts as inner bolts at which point it would be 14 inner and 12 outer. either way it sounds off
Indeed special lubricant for cylinder head bolts is CAT / CTP 5P3931 Anti Sieze Compound / C5-A copper based lubricant blended by Loctite company 😊
What a greatly explained video good job sir
You forgot the front orings on dowel for oil to head
What about the o-ring that goes under the plate? Does it take one on top of plate too?
Hello and thank you for contacting us! For us to better assist you, please send us a direct email to marketing@costex.com so that one of our representatives can contact you directly. Thank you!
Did they ever get back to you about those O rings?? I’m doing a C-15 rt now and I would like to know that as well
@@gripgetter O-rings 5P-0840 should fit before and after spacer plate gasket
Mine has 2 on a 1LW
@@gripgetter on your plate front dowel look for the oring cut out in plate my 3406e took upper n lower
Should head be retightened after 250 hours or not needed?
Not needed in any engine technically😊
a query is the socket used for tightening the screws 19mm?
Cat has a socket made for these 3/4 drive, 12 point.
Might help to say what engine in the title
The say the C15, it is a CAT
Might help if you watched the video
Cool
Thank you for your comment!
15d
Did not add sealant that was required in 2017 on spacer plate gasket.. Now if you have the newest head gasket don't need sealant.
I made the mistake of following this and had to do it over because they left the part about the two small o rings for the oil return. That sucked big time.
Hi d9r cat dozer cylinders head information
Good afternoon,Thank you for contacting us. For any inquiries or questions, please contact us via email at:socialmedia@costex.comMarketing@costex.comThank you!
Hello! For any questions or inquiries that you may have, please send us a direct email to: marketing@costex.com
Thanks!
looks like that chinese head from jereh ....reinforced ribs, more nickel content,thicker deck....comes with a promised to be the solution for cracked heads....
I think you misspoke. You said 10 outside and 16 inside bolts but viewing the video a few times I'm counting 16 outside and 10 inside bolts. unless you count the 4 side bolts as inner bolts at which point it would be 14 inner and 12 outer. either way it sounds off
For Sale 10 Cylinder Heads Caterpillar 3618 Marine Engine