ALUMINUM BOAT SUBFLOOR INSTALL | 1648 Jon Boat Build - PART 1
HTML-код
- Опубликовано: 8 окт 2022
- Join the community on Discord: / discord
- Check out this update to the 1648 Jon Boat Build where I start on the aluminum floor install. In this video I demonstrate how to setup an easy subfloor using 1/16 aluminum angle and 3/16 rivets. This is Part 1 of a multi-part series getting the floor setup and installed on the jon boat.
PART 2 VIDEO - • ADDING AN ALUMINUM FLO...
Follow us on Instagram: @MVBOutdoors
/ mvboutdoors
---Product Links*------
3/16" x 1/4" Grip Aluminum Rivets
- amzn.to/3edAwQ2
8-Inch Riveter Gun
- amzn.to/3eeoiXj
---Related Videos------
JON BOAT EXTERIOR PAINTING
-- • RUSTOLEUM TOPSIDE MARI...
How To Remove Jon Boat Bench Seat
-- • REMOVING JON BOAT BENC...
Jon Boat Transom Rebuild
-- • Jon Boat Transom Repla...
*Orders through the Amazon affiliate links above provide us with a small referral commission at no cost to you. Using affiliate links in no way affects our opinions expressed on this channel and merely serve as a method to help this channel grow while still providing useful, relevant information. ------------
#jonboat #boating #fishing 
Авто/Мото
![J.P., NLE Choppa - Bad Bitty (Remix) [Official Music Video]](http://i.ytimg.com/vi/rBDa6BCvw10/mqdefault.jpg)
Part 2 Video - ruclips.net/video/Ya7LbzR3oEo/видео.html
Great idea and engineering. I also commend you on involving the young 'un in the process.
I love that you are teaching your daughter that projects like this are not just for guys!!
Of course! She's my fishing buddy too so I like to keep her involved. :)
This was really helpful as I've never used a rivet gun. Thanks for listing the products you used in the description.
Looks awesome and your supervisor-daughter lol is adorable, I look forward to the finished project ❤️🤙
what a great helper you have there.
She did a great job!
Foam and flooring coming next, starting to see some progress! Taking suggestions for floor coverings. Carpet, eva foam, rubber mats, etc. What do you guys think? I'm hesitant on the eva foam because it stains so easy.
Thinking about maybe doing something like this to my Lowe 16/48. What thickness flooring are you using
@@dewaynewebb3467 It's 0.1, little less than 1/8th
@@mvboutdoors I was pricing some 1/4 inch 4x4 and it was over $400. Maybe I’ll need to go thinner
@@dewaynewebb3467 Yeah it can get real pricey real quick, shouldn't need thicker than 1/8 if supported. This was under $300
So you upgraded from harbor freight to harbor freight+!!! Cheap Date!!!! Great work on the floor! Haven't checked in in a while. Nice to see an update on the boat!!!!
And the Helper is Adorable!!!
Haha, only the best! 💪
How much did the aluminum for the framing cost?
Makes me want to tear down my war eagle n do this
Do ittttt
what a great guy
I’ve been following your build videos. About how many feet of angle aluminum did you buy to complete the floor bracing?
I want to say around 3-4 8ft pieces
Did this reduce flex? Im trying to reduce flex as i have a couple rivets that only leak when im mobbing in rougher water
It stiffened up the boat for sure. I would rebuck the rivets and seal with epoxy first.
Enjoyed the video.
I am laying a new sub floor in a mod v as well and am curious how far you were able to run your floor with the severe angle toward the bow? Is that why you added the front bench seat? Thanks
I stopped about a foot after it started to angle up. I figured since I couldn't walk on the angle it would make more sense to turn it into storage.
Thats what i figured. Thanks!@@mvboutdoors
Do you worry the the metal on metal supports could create holes in the hull from flexing over time?
That was definitely a consideration when doing the supports, I made sure they are only riveted to the ribs so nothing is rubbing on the hull.
@@mvboutdoorsI’m glad i read this comment because on my deep v i was just going to cut small pieces from angle rivet to ribs and then go up with other angles. problem with that idea is i would have to drill holes in the side of the hull to attach the deck . Unfortunately my boat was a closed bow up front that i cut open so i need to put side supports in and drill some holes into the hull
I’ve got a 1648 tracker grizzly that needs a floor where can i get braces like that for my sub floor
These are built using 1/16 aluminum angle. You purchase it at your local hardware store. I believe I used 1.5"
How stable is it for a big guy? Mine flexes and I’m looking to do this to mine
It was more than stable for me, you get two or more big dudes y'all have to watch each other but myself and kids were fine
Where do you get your rivets from especially the closed in ones
3/16" x 1/4" Grip Aluminum Rivets
- amzn.to/3edAwQ2
@@mvboutdoors thank you for the information Love watching your videos you do an awesome job on all these boats.
@@DavidMorgan-vj2rf Happy to help man, I'm glad to hear you like the videos! They're a lot of work but I really love it.
air riviter......