Wouldn’t Believe What’s Going On Now
HTML-код
- Опубликовано: 29 сен 2024
- The big swede gets dirty in the old hog manure tanker trailer, power washing it out.
Chet puts brake chamber on the terragator.
Chet also torches the old pipes out of the tanker trailer.
after the tanker trailer is converted, the whole crew works together on placing it in its new home.
We are a family farm located in west central Minnesota. est. 1918
We enjoy to share our part in agricultural with you and show our followers the ups and downs of farming.
I hope you enjoy our videos and please don't forget to subscribe.
Check Out Our Sponsor Agricultural Chemical Solutions-
Ships anywhere in the states check out their chemical prices and join the farmers that already get their chemicals there.
www.agchemicals...
www.agchemicals...
Don't be scared to try out a new company. We have been buying chemicals from them for 10 years and have nothing but good things to say about them.
Follow Us On Instagram For Daily Videos
/ larson.farms
Follow Dougo on Instagram
/ dodge.boy.dougo
Facebook.
www.facebook.c...
Check Out Our Apparel..
www.farmfocuse...
Business Email-
cslarson@live.com
Edited By-
Blondie (AKA Nikki)
Music By-
Imovie
Please don't let anyone ever go into a confined space without checking the oxygen level, especially a tank used for transporting hog manure, which is rich with methane gas. To top of all that, you used a torch to cut metal inside the tank where toxic gases are abundant. I have 1st hand knowledge of some horror stories. Please be safe!
It hasn't had high manure in it for years there's no methane in there
I would suggest using a 3” banjo screen with like a 250 mesh when unloading that thing for the first few loads. To keep any remaining stuff out of your sprayers.
Thank you very much Larson Farm for feeding me and my wife, and my cats!
You should really get a 3" pipe hook a good squirrel cage floor fan to it so you can keep air flowing into those confined spaces....
I had the same thought.
My thoughts too.
And use a porta band saw to cut the pipe.
The little Dane and the big Swede aka turnip a are funny. They could take up being comics. Lol
Getting ready to put addition on the shop and put a pit in it, how deep is your mechanic pit?
5’ deep 3 wide and 25 long
Yupper, The springbreak chamber will definitely ruin your day if you remove the splice band under pressure and the spring itself will remove fingers if you're not careful.
Fingers???, they'll kill you !!!
@@lennymiller9308 Yes they will! Charged air system (110psi) will result in over 2000 lbs of force
That thing you working on is a cage bolt
Bit concerning as to how you would have got him out if there'd been a problem, in the UK there are quite well defined rules regarding confined space work. Please don't assume that bad things happen to others!
Dougo almost lost his son in this video
As a welder myself, I am loosing my $h!+ watching you guys work in that tank. Please take a tank/ inclosed area safety coarse. All I am going to say lol.
with all that rust and then the torch use in the confined space I half expected someone to go down - thank god it all worked out.
I hear ya man, I pulled a tanker for 10 years & worked around the yard & Tank Wash. I thought maybe they would at least check Oxygen Levels, but NOPE!!! Not Even. SCARY.
You really need to learn about the hazards of confined space
@@Cap513 Agreed, Oxidation = oxygen depletion
I was having a mild panic attack watching these guys in that tank. Even if they were set up to do a rescue, If someone did go down it would be a nightmare trying to get a guy out that hole.
Chet.. take it from somebody that has experienced the bad side of crawling into an unventilated tank.... DONT DO IT ! Not to sound morbid, but I've been involved in both rescue from tanks as well as body recovery from them. There are ways to do this. It's not worth your life.
Same Here
Osha is going to love you. Wow, thank god everyone is still alive.
Yeah, thats incredibly dangerous.
Just think about the 60s and 70s than give your balls a tug
We have a pit in our shop it's very handy. In michigan we have to have a exit from the pit to the outside of the shop in case of fire. We also have to cary special insurance on the pit . We were required to have a ventilation system because welding and torching gases like acetylene gather in the lowest point of a building if there was a leak . Pits are useful but are an insurance liability. We also have 2 hoists for cars and light pick up trucks . We do mechanic work and fabrication on the side during the winter on cars trucks and heavy equipment. Nice video stay safe and farm on my friends !
That was rough watching you do that brake chamber...I was yelling at the screen by the end....the old saying you gonna learn today...
I would have been chicken s**t to go into that tank. What about the possibility of methane gas? Then using a cutting torch in an enclosed area like that...may God watch over you.
Chet you’re giving Zach Johnson a run for his money with the content man! Keep up the good work, I tell anybody who will listen to check you guys out! Informative,entertaining, and great situational comedy as well. Well done sir!
I would have to say that Chet has outdone the millie boy.
Its hard to beat zachs humor, but Chets operation is pretty interesting, and they actually work on the bigger jobs that are interesting unlike zach.
Me too .I love watching the Larson farm guys doing their thing
He's only 410 thousand subs behind
Lol
I do enjoy this more though
Check out "trippy farmer" too he is pretty good
Old rusty containers are some of the worst confined space to enter, oxidation uses oxygen in the tank. Have plenty of air purging and a fan blowing air. Obvious really, great videos keep up the good work
So I will add to the chorus of voices about the tank entry. I have done this professionally onboard oil tankers and its 100% SERIOUS BUSINESS! While you may not have access to all of the gas/oxygen meters we do offshore there is 1 thing you can do to help prevent a serious FATAL accident... ventilate, ventilate, and then ventilate some more. You should do this ANY time you enter a confined space such as a grain bin, tanker, cistern, and such. Don't be shy about it, the more and longer the better! There are lots of things like rust, decomposing manure that consume oxygen, if you or someone working for you enters a space with insufficient oxygen they WILL collapse and start to DIE, and if you try to save them without a source of oxygen YOU WILL DIE TOO! These scenarios are all too common in many industries, do some reading, talk to your workers and make sure you aren't sending someone into a deadly space. If you want help shoot me a message and I will point you in the right direction.
a confined space with possible methane vapors no hole watch posted. At least they are using respirators. I hope they are using organic vapor cartridges!
seems pretty dangerous to go into a tank without any personal air supply. Lots of folks have died that way,
Yup
totally confined space. not hating here but its definitely a life threatening situation especially with tank being previous waste tank.
Have Nicole give you a haircut!
Jobs like that makes me glad I'm to fat to fit in the tank 😂 God bless you guys thank you for everything you do so we can eat
Dude, your confined space safety procedures totally suck.
The little 4 inch long hole in the side of the brake chamber housing is where you can store that cage bolt that compressed the spring after it’s removed out of the cage so if you need it in the future to pull the equipment somewhere you can re cage the chamber and move it. 👍
You should say " High quality, "inexpensive" chemicals!! NOT "CHEAP" chemicals.
You needed to adjust the slack adjuster with the parking brakes off
you don't need to adjust slack adjusters anymore.
@@scottgadberry1377 I think he meant set it up....
@@scottgadberry1377 only if you have auto slack adjusters. Even with auto slacks, you need to keep an eye on them. They aren't perfect.
@Scott Gadberry When replacing a brake chamber, you do have to adjust the brakes to make sure they are within spec. It may be close, but why not make sure it is correct.
big tip that would have saved you alot of time doing the brake chambers instead of compressing the spring by hand just go release the brakes and theyll compress
A real man would let his hot wife cut his hair 😂😂😂...
Or he might overcome his helplessnes and do it himself!
@@claesmansson9070 Or he might consider asking the Swede to cut his hair. The Swede can do almost anything, so cutting hair could be a one minute job and at least the hair will not be in his eyes. Heck, he could cut his own hair or he could order one of those hair\vac\cut devices and cut it himself. The Swede seems to have no trouble getting his cut.
@@claesmansson9070 Heh, well i do cut my hair myself for over 15 years now and it always worked well. The "Army" cut, now better known as "Corona" cut was always my favorite. XD
What does a math teacher do when they’re constipated?
Work it out with a pencil.
I’ll be here all week.
That tank is a confined space entry under OSHA
Please get a gas monitor for that man in the tank, a fall protection harness with SRL lanyard and a rescue device. I’ve been in the bulk tank truck industry for 15 years and can think of 4 separate incidents around the South where men have died making entry to bulk tanks. You may say it’s been cleaned - by your own admission that man went in to do more cleaning. Even clean tanks must be treated as a high risk entry. Also have someone watching that man trained in the use of a rescue device. Y’all are really rolling the dice here. A couple thousand dollars, some training and a different approach is cheap when it comes to someone’s life.
congrats on 50k guys! vids entertaining as per usual!
We should have had an SCBA on before we went in that tank....
BELIEVE ME, THAT SPRING HAS OVER 2400 LBS OF PRESSURE BOLTED INSIDE OF THAT CANISTER AND WILL TAKE YOUR HEAD OF WHILE GOING THROUGH A BLOCK WALL NEVER TAKE ONE APART UNLESS YOU KNOW WHAT YOUR DOING, AND IF YOU DO MAKE DAMN SURE YOU COLLASP THAT SPRING ALL THE WAY WITH THE COLLAPSING PIN
Good video, you'll need to follow better safety methods, as everyone has mentioned. I would have used a saws all to cut the pipe, no gas fumes.
Seen the inside of a many sludge tanks myself. Where's your confined space entry permit? :P It's a thankless job, but paying it out to a vendor is unnecessary. You may want to find a way to block the light coming in that dome, to prevent any algae. Nothing worse than plugged nozzles. Cheers.
I subscribe because I think farmers need over one million subscriptions and I like to eat.
I cannot fathom filling 6500 gallons with a 5/8 garden hose that’s insane
at less they are not standing holding the hose.
ZI am very concerned about the oxygen level in that tank
These release the spring brakes the pressure compressed and spring and if just release the parking brakes
Confined spaces. Needs continuous supervision. Bad situation.
Let 'er buck! I haven't heard that one for ages. My husband welds large tanks for a living. I'm sure he would have a few words of wisdom like the other welders who have commented. Or he would just shake his head from side-to-side and walk away! From years back, I know he's said there's a buddy system for enclosed tanks. He had to take a safety course at work.
Why not let your lovely Wife Nikki cut your hair?
A better word too use for cheap is inexpensive especially when you are advertising a product, sounds better. Just a suggestion. 😁
Busy time for you guys.
God bless you and your family.
Brian Hubbard exactly what I was thinking.
at 10:07 when the Teflon tape disappeared, did cole the corn star grab it for his draw of teflon tape.
Definitely not OSHA approved.
That American 🇺🇸 in the shop is 🔥🔥🔥🔥
Your brakes aren't adjusted properly with the park brake on, the angle between the slack and the brake rod should not be less then 90deg.
Just a tip, landing gears on semi trailers are normally rated at 50,000#. But I think you had the right idea with cribbing under the king pin plate. Never hurts to cya. One idea to save wear and tear on your well pump is to use rain water. If any of your sheds have gutters, hooking onto them and diverting water to the tanks would get more than you need very quickly. One inch of rain gives you just under 3quarts per square foot of roof area. A couple spring rains and they would be full. I did that off my shop roof, a couple years ago I had 10,000 gallons from 3 rains. The only issue is leaves in the gutters, but if you dont have trees nearby, it isn't an issue. If you did have leaves, a filter can be made from a 5 gallon plastic bucket and cheap 5 gallon paint strainers. They worked great for my rainwater setup. Just some ideas, good luck. The best part of it was it is all gravity, no electricity required to fill the tanks.
It reminds me of the underground tunnels in gta with the sparks coming out the wall when you were welding.
Haircut is easy- get electric hair shears, put a 1" guard on it, and cut it yourself so every hair is 1" long! Then just trim around the ears... 🙂
Indeed. I use a electric hair cutter with a 9mm spacer on it for over 15 years now and it always looks perfect and you dont need to cut your hair for at least 3-4 months. Just make sure you hit every spot at least 3 times from every direction so that you dont have any long hair left somewhere on your head.
I have some Swedish fish candy for the Swede this Easter.
Is that sponge Bob square pants or fruit boxers??
There’s no way I would go inside that tank! Especially such a tight fit.
Always get a thumbs up, sometimes even before I watch.
“That’s just rust right?”... nonchalant smell test. “I wouldn’t say that.” High quality comedy there :)
I always get a good laugh from their vids.. fun stuff 😎
I’m claustrophobic and I get goose bumps on my arms when you go in these tanks 😀😀😀😀😀
It amazes me how much knowledge is required to maintain all the farm equipment!
There is an OSHA guy somewhere, losing his mind 🤣
After watching a video of the pretty sweed (Angelica Larsson),watching this video with the big sweed.
We had 3 guys die inside a steel barge (New Westminster, BC) here as they went one after the other to save the person before. The culprit, rust consumed the oxygen and the workers dropped like flies. You guys shouldn’t do that again, if you passed out, there isn’t a way to save you.
Chet watch that Eric guy. He is not TRUSTWORTY. Something about him. Watch your family too.
You guys know a little bit of everything, l guess that's how you survive!
If you got a dug well I would be using a gas powered pump to fill that tank A garden hose would be painful but better than a hand pump 😂
Looks like fun cleaning out the tank😂. Keep up the good work and great videos.
Let your wife cut your hair Chet
Its called caging the brakes,. Taking the long bolt out gives the brakes back into use.
I was holding my breath when you out that torch. Moms are good for giving haircuts.
wow what a job cleaning that tank out great job, very interesting watching your videos is like going on an adventure it's great
Your family needs to take a confined space class! It can take seconds for you to pass out. If Osha sees this video you could be in for heavy fines! Work safe guys
I don’t think they fall under osha. I believe you have to have 10 employees and family members don’t count. But could be wrong on that
I see why you hired Eric, that way you can video someone working. LMAO 😂😂. Brake chamber, Never Seize is your friend when you need to take things apart years later. Thanks for sharing the Shitty job's. 😊😊😂😂👍👍👍👍✌️
Watching you work at the end there shows me how much high school has corrupted my mind😂
He was home schooled you can tell to he is rely good at everything he does
Hello friend, on the back/rear of a brake pot there is a bolt called a caging bolt that is to keep the emergency spring side compressed. When I measure my push rods after old pot uninstalled I will apply air to the service side with a airline with a shutoff valve/handle to both the old and new pot, that pushes the push rod out to it's max length so you get a bang on measurement. Also you had it right at first after installing the brake pot and installed your pins and air lines, remove the caging bolt make sure you release your park brake after chocking the wheels. Then do a brake adjustment, going all the way tight with the slack adjuster then backing off half a turn, will give you 1 ½" stoke. Cheers! Keep up the good vids! And hard work!
Chet i thought that was Mike Rowe from (Dirty jobs) coming out of the tank but alas it was the Big Swede . I agree with Matthew in a way I think Larson Farms and Millennial Farmer are both excellent channels Zack has his own way of doing his content Chet you have yours . I think both are exceptional channels keep up the great work .
i'm surprised there isn't an old pair of cattle clippers laying around somewhere that would be heavy enough to deal with Chet's hair. You're starting to look like the south end of a northbound bear there boy! No concern that the residual rust in the tank won't overwhelm the filter system? It appeared there was still of lot of rust coming out while the Swede was pressure washing.
Chet. get your wife to trim your hair, I bet she could do it!!!!
I hope you've put a screen over the top opening or at some point you're going to have a bird, rat or squirrel corpse floating around in there.
Great video Chet
High quality, low price Chet. You are contradicting yourself grammatically... they can't be high quality chemicals and cheap chemicals...
Who the hell fills up that big of a tank with a garden hose? 😂🤣🤦♂️ You better start filling it up now.
Hope you guys can stay out of tanks for a while now. Thats risky stuff right there!
do +you have OSHA in that state ??
Not typically found on farms, otherwise farmers would be shut down....
They have a hevy duty commecial gilmour 3/4" I.D. hose, open then ends for winter. IT should help the flow also if the hose is y'd off with a regular splitter, it cuts your flow by 50%. Gilmour sells a full flow Y and Full flow shuoff if you put one by the tank. That should improve the flow rate pending the well output. Tanks a lot for the video!
6:30 That's not how you check or adjust slack adjusters.
That bolt is a caging bolt.
Adjusting slack adjusters after air chamber replacement
ruclips.net/video/vWlmdrsU8cM/видео.html
Bendix air brake maintenance.
ruclips.net/video/nn9r1VpaKNY/видео.html
Great video why not put a fan in the pit to keep you cool JMO 👍👍👍👍👍👏👏👏👏👏💪💪💪⭐️⭐️⭐️⭐️⭐️
You should cut a hole in the manway lid and weld in a coupler, that way you don’t end up with dead birds and critters in your tank. Just make sure that vent behind the manway works lol.
Doug-O....60k sub challenge...Larson Farms Monkey Bar Olympics!!
A farm equipment tour would be cool if you ever get the spare time to do one
Wow! Break cheers in Houston are $35.00-$45.00. Mylanta do they get you guys on parts. I bout 4 for what you paid for 1. Ouch. Bless your heart man..
If you would use a heat gun those hose's will slide on much easier
He used a map torch earlier
You should have ventilation in the tank - If for no other reason than co2 build up. Big Swede is big - BUT, he has a lot of fat on him. He looks big but.... Those baffles are important. Liquid sloshing in that tank can roll you over. It won['t suck anything out unless you have a way for fresh air to get in. For THOSE hoses, Chet. High Quality LOW COST chemical.
This is extremely unsafe and an overall poor judgement from everyone involved.
I don't doubt the quality & ingenuity of you work. But you all failed to realize the danger you put yourselves in.
Confined spaces will kill you, and will kill your friends when they inevitably try and rescue you.
If you don't have an oxygen monitor, or fresh-air-supply hood, or confined space training. Then you don't do the work.
I listened to the Off The Husk last night. Sounded like a lot of fun. It was great finding out more about you and your family. I loved it. Great job!!!
Watching may 28th 2021... Tell the wife u do workout everyday.. You work outside.. Lol
Awesome video and no bitching from me! 👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸
Air brakes are easy if you pay attention
Lots of companies make brake pots some even put other people’s names on them
Don’t pay for the name
Buy the correct size
Cut the plunger to the correct length
Screw on your clevis hook up your air lines
Important chalk your wheels so your machine will not roll very important
Step
Now release the air park brake
Now remove the spring tool form the back of the the pot
Their is a sleeve on the side of the break pot to store that tool for future use
Store it
Now check how much travel you have
Speck is 3/4” to 1 1/2”
Adjust your slack adjusters
So that when you push the brake pedal you have no more than 1.5 inches
And you are good to go
Wow! You have to be kidding me. We farm in Northwest Washington and we sunk a 12 inch well casing down 100 feet to pump irrigation water from. Its plugged into an aquafier and has never run dry no matter what time of the year. We use a tractor pto driven 4 inch pump and can fill our water truck lickity split. I cant imagine using a garden hose to fill a 6,500 gallon tank.
Hey, Chest - You DO NOT toss your tools on the cement floor. Tools are what makes work easy. If you abuse your tools they stop working then you will have a difficult time.
Why didnt you go to the water depot and fill the taker up with water, when driving it home it sloshed it around then drain it. That would get ride of some of the work before pressure washing lol.
please start buying zip cuts, rather than cutting with 1/4 grinding discs. you will be very surprised how well they work.
Ever thought of collecting the water from your massive roofs to fill it for free