VRSF Charge Pipe TIAL BOV on N54 335i DIY Installation
HTML-код
- Опубликовано: 6 авг 2024
- Follow the build and photo shoots on Instagram @frostbite35i
In this video you’ll learn how to install the VRSF Charge Pipe and Tial Blowoff Valve on an N54 335i.The aluminium charge pipe is able to withstand higher boost pressures compared to the OEM plastic pipe meaning you won't be stuck on the side of the road after increasing boost, while the Tial BOV adds some much needed eye candy to the engine bay as well as that beautiful woooooosh on every gear shift.
00:00 Introduction - What's Happening?
01:45 Building the Charge Pipe BOV Unit
05:46 Removing the OEM Charge Pipe
10:03 OEM vs VRSF Charge Pipe
10:52 Installing VRSF Charge Pipe
14:11 Sound Testing the Tial BOV
Watch the M3 Conversion here! • BMW 335i M3 Conversion!
In addition to the M3 Conversion series,you'll also be able to see the 335i become MHD Stage 2+ Full Bolt On, with a tune, downpipes, charge pipe, BOV, intercooler etc. The end goal (for now) is a N54 Powered M3 Conversion Daily Driven Street Machine pushing 450+ Horse and Torque. So follow along and enjoy the build! Авто/Мото
Nice video did you get rid of that rattle yet I have the same issue
Hey, Yeahh I got it fixed using mhd tune. I’ll post a video soon.
@@Frostbite35i oh yes please post a video on how you fixed it 🙏
You didn't modify the vacuum line from the tial?
Nope no modification.
For some reason my vrsf charge pipe won’t seat fully so you have any tips for this or should I buy a brand new o ring
I had a hard time getting it to sit properly as well but you just have to keep pushing and twisting slightly till it clicks.
@@Frostbite35i I ended up buying a new o ring from a bmw dealership and it slid right on with a little Vaseline
@@GooseJuiceGaming That’s great! I just realized I replied a little late lol.
@@Frostbite35i it’s all good lol
Was this the q tial bov ?
Yes
HOW DID YOU GET THE CLICK PLEASE HEP
Hey, don’t worry it will fit for sure if it’s the VRSF one. Make sure you have the manifold side in place before you put the elbow side in. Also make sure the c clip is not on yet. If you push into the manifold with some force it will go in. If you still need help dm me on Instagram and I’ll try to help. Good luck.
@@Frostbite35i i will be trying some more tomorrow i will let you know what happens
FOR THE LIFE OF ME I CANNOT GET THE CHARGEPIPE TO CONNECT AND YOU HAD WAY MORE STUFF IN YOUR WAY
same predicament currently FML
@@heidiseda5767 its been a day still no luck i dont get what im doing wrong 😭😭
You gotta take the airbox out bro it’s gonna be way easier, this video has a very complicated method