Hambini: Worlds Most Honest Man.
HTML-код
- Опубликовано: 13 сен 2024
- Here is the other video exposing yet more lies from Hambini about the bearing puller:
• Hambini Fact Checked! ...
I wish I could have fit all his slander in one video but it simply wasn’t possible within a reasonable run time.
There was just too much information to cram in and too many lies to debunk.
But I think this is one of his tactics, he knows that its harder to debunk a lie than tell it.
I understand that arguing with a pathological liar and potential psychopath is pointless.
I just hope that a few more people hear the truth and that it’s at least entertaining for everybody. 😅
Thank you for watching my video.
If you have any questions just ask in the comments and I will get back to you.
Please do subscribe,
Like the video,
Send it to a friend,
And click the Bell 🔔 for more videos.
Safe riding,
Reg.
Music I use: Bensound
License code: C5M96PLFQSXZQ4US
Song: Summer
The worst part for me is his claim of having a threaded top cap when in fact it's actually seized to the bolt due to poor maintenance/corrosion. A layman can figure out that the bolt should turn freely from the cap, so the stem below doesn't end up turning with it. In fact it could've been verified easily by taking the thing apart if he wasn't so sure of himself.
That was my thinking, I might be wrong and if I am I will admit to it. So why not just show us by unscrewing the bolt. 🤔
Thanks for that Reginald, so glad you revealed more of Hambini's character and knowledge gaps.
Thank you, it needed to be done.
Just marry each other already guys
Real
gay marriage is afaik not legal in brunei.
That’s true. 👍🏻
My Wife would never allow it. 😄
@@reginaldscot165Then you can adopt him! ❤
Great video. The algorithm is not on your side, I always had to purposely look at your channel for new videos. I was sent to your channel from ' The Controversial Cyclist ', who has also been uncovering deception from the 'experts' as well as their shameless shilling.
I have been suspicious of the algorithm for some time. Please do like, subscribe and hit the bell 🔔 as that will definitely help. Also do pass it on to like minded people if you are feeling generous. ❤️🙏🏻
His headset service video was enough for me
in hindsight Hambini probably wished he had never done it
Indeed, that one woke a few people up. I enjoy when people ask his friends what they think of that video. They all squirm and sweat. 😄
I’ve never seen that one before 😱 what the hell was he doing?!?!?!
I still haven't recovered my sanity from watching this engineer bashing a carbon steerer tube with a mallet.
I use several Aliexpress Headsets and even if they are cheap chinese junk, I've never done such a crappy job as Hamboner when maintaining the thing. But yeah, such incompetence is to be expected by a "5 yr old ""engineer"""
Thanks to Hambini, i found and follow your channel. 😁 he's a joker, and every industry have someone like Hambini.
Thank you. 🙏🏻 The funny thing is, even before we fell out, I never found him funny. Not much of a Joker if you ask me. 🤷🏻♂️
@@reginaldscot165 the joke is in his inconsistency. 😂 Crazy thing is, many believe in him.
To be fair, I trust Aliexpress and Francis Cade more than Hambini. At least the Ali shills like Francis know they are promoting glorified junk and go thru a rigorous "real life" test. Hamboner in the other hand, promotes his literal shite BB's as "Top of the line" components
Many of Hambini’s video is painful to watch example the hammering of the headset
He loves his hammers! 🔨 😅
@@reginaldscot165technically a mallet. But who is checking!
Two brits are fighting over bottom brackets. Billions will perish.
1 Brit
@@jameswarner8038is Reginald Scot not a brit
@@clintk he's from Nottingham - pretty sure that's in the UK. He's not a resident, but that doesn't make him a non-brit unless he has renounced his citizenship.
Oh boy I hope not! Enough killing going on in this world at the moment. 🥺
Hambini is a Pakistani.
Lol Hambini is a joke. He's exactly the kind of "engineer" that machinists and mechanics laugh at.
I was lucky, in industry I never met anyone as bad as this. 🙂
You cooked him 😎
he roasted the Hambini fraud
Gas mark 10 for 39 minutes. 🤌🏻
@@reginaldscot165 It could've been a 4hr video, but you somehow figured out how to compress it in 39 minutes of literal roast beef and dank memes.
Please stop calling digital calipers Vernier calipers. It's not a Vernier if it doesn't have a Vernier scale.
Thank you for the education! 🙂👍🏻
@@reginaldscot165 The same to you .👍
I totally agree with you. I actually find him really irritating.
I’m more concerned about his lies than him being annoying. I think if he was honest I’d still watch his content. 🤷🏻♂️
And an actual comment - he’s such a joke. He decided that since he knows something he knows ALL OF THE EVERYTHING, and his audience swallows it all, like the lemmings they are.
Also, if his way of installing BB’s and top caps (just cram it in until everything creaks) is any indication of how he does things - I’m not surprised he only deals with hairdressers. Normal girls, like bikes, require some finesse 😅
😅 My Wife would agree with you on that one. I think the way a man looks after his tools and toys is an indication of his ability to look things in general. 😉
Have a lovely day! ❤️
Probably he knows more about everything related with cycling than most people, that's why even profesional teams use his services, but surely you can do better than him right? we will wait for your YT channel about BB's
How do you know he thinks he knows all? He does videos on what he knows and doesn't do videos on what he knows nothing about. You don't get to watch those videos because he doesn't make them!
@@johncrow5552 If you think Hambini is nonsense then you're either a hater or clueless, don't know which one is worse but surely you can do better
@@lapis.exilis you probably know as much about engineering as a cow about astronomy, so yeah not expecting much from someone who doesn't understand anything about how BB's are really made and how are they supposed to work
Scambini......!?! How many times can you hand him his own arse? I almost fell sorry for him 😂
“Scambini” I like that. I might have to stealing that. 😉👍🏻
“Scambini” great name for that joker😂
Hambini always has to call everyone and everything around him crap, throwing insults left and right, acting like he knows everything. He presents this as being funny, informed and experienced, but we can all see he is just very insecure.
You can have the tallest building in the city by building the tallest building, or by tearing every other building down. Hambini, being so insecure, chose the latter, but ended up accidentally exposing his fragile ego.
Very poetic. 🤔👍🏻
The Virgin cracked carbon BB Hambini vs. The Chad Ti connosieur Reginald
To a hambini with a hammer, every problem looks like a headset
Simple solutions for simple minds. 👍🏻
thanks for the video, i've always wondered why he uses such a great force to install his BBs
You are welcome. 🙏🏻
Very interesting, thanks 👍
My favourite part wasn’t said here but is linked to your explanation - Hambini ‘reamed’ a Trek Emonda ALR a while ago about how Trek should have machined the BB tube after welding and blamed the oval shape of the BB on cost cutting, and by doing so proving you right 🤷♂️
That’s interesting. Thank you for the comment. 🙂👍🏻
Do Durian Rider next.
On OF.
Well DR has no beef with me, I actually agree with a lot of what he says. His lifestyle choices might not be my own but that’s not my business.
@@reginaldscot165 No beef, only tofu.
Good luck arguing with the five year old.
The roid user who attributes his good health to a vegan diet?
@@johncrow5552 Ultra high carbs & sugar
Hahahahaha! I’m 3 seconds in, and life is a lot funnier already! 🎉❤😂
THANK YOU!
(And of course, I’m here for more of this!!!)
I’m glad I could brighten your day. 😘
Best video on RUclips cycling for a very long time👍👍Hambini asked for an apology from me 2 days ago, probably expecting one, and obviously refused to apologise for speaking the truth as he 🤥s. He will mobilise his foot soldiers now to come and get you, and Paul Mapdec will be bagging out video all week to back up the engineering lies he spins.😂😂😂
Mapdec salivates over Hambini’s every word 💦
Hambini's latest video about a Look 795 steerer tube failing will not go down too well with Mapdec one bit. 😂
If I remember rightly Hambini did say in one of his previously videos that Look bikes are the dog's bollocks.🤔
@@kevinjackson7299 Yes all contradiction and mind games from Hambini?? Is it really worth all this to punt a few BBs?? Same for mapdec, talk BS about other brands to shill your own product??
I think you'll find it's pronounced "Mapcock"......you're welcome x😂
@@philpowell6915 👍😉🤣🤣🤣🤣
Everything I learned from this is that there was never anything wrong with English threaded…
Basically yes. As long as it’s in a metal frame.
Sorry, can‘t resist, have had too much to do with metrology in my past. Hambini is using the gauges wrong. Those 20 microns are valid at the calibration temperature only, even if they are made of Invar or similar materials. Usually at 20°C, but it might differ, and there you are allowed to compensate for that. The bottom bracket is surely not climatized to the same degrees either. You do the same mistakes in your measurements and the questionable alignment you did there (this is for home improvement after all, don‘t trust the second digit in the slightest), so you will very likely undercut the „real“ diameter (not compensated for temperature, it is warm in your garage?), but I doubt that you‘d claim meteorological accuracy?
Furthermore, in those dimensions, everything, including steel and titanium, becomes rubber, as they say. It just starting it in double digits microns, but still. That is why real CMM try to minimize force, no matter what they measure.
That’s an excellent comment, thanks you for the education. And yes what you say makes complete sense, especially about temperature. It’s very hot here in Brunei, so anything I measure in my workshop is going to be significantly different compared to the same item in a UK garage. 🤔
@@reginaldscot165 wouldn’t say significantly, but while splitting hairs… yes. Hambini was simply wrong that the bottom bracket hole is too small, Lightspeed is likely to be very adapt, and a machined hole will be great in spec, no matter the material. I fully agree with your conclusion.
The difference between a bike and a car mechanics is the 5kg hammer.
If you look at SRAM technical drawings for PF30, who i believe came up with PF30. It states nominal is 46mm +0.0 and -0.05.
Makining it 40.95-46.
That should be argument ended tight there as its a standard set by SRAM right?
Who knows why park have decided to make the ream outside of SRAMs spec.
Not really, because as you saw from the video the SRAM BB is under sized. The BB is only 45.93 and on the other side it was 45.8! 😅 They don’t even meet their own standards.
Also I’m not using a SRAM BB. If I have a BB shell hole that was 46mm my BB would fall out. Even the Hambini BB wouldn’t like a hole that’s exactly 46mm. I did explain the difference between real world values and nominal values in the video. 👍🏻🙂
@@reginaldscot165 Disagree. The nominal measurement for PF30 is 46mm but the actual measurement of the BB shell should still be within the tolerance range of 45.95-46.00mm otherwise it's out of spec. Similarly the PF30 BB spec states that the BB should be 46.01-46.07mm to provide the correct fit. This suggests that Park Tool are slightly under-sizing their reaming tool. I don't know if that's in an effort to reduce creaking, as a response to undersized BBs or just a case of playing it safe since it's easy to remove material but very difficult to add it back in, especially if you're trying to ream a hole that isn't perfectly circular to begin with. Regardless, it is slightly frustrating if they aren't following the spec.
The problem with digital callipers is that even though they often have a resolution of 0.01mm that only tells you how small a number on the screen it can show and NOT how accurate it is. A decent set is usually at least accurate to +/-0.02mm but some only claim an accuracy of +/- 0.25mm and even then there's no guarantee they'll maintain that level of accuracy over time. Without knowing the spec of your callipers it's really hard to say whether your BB or BB shell are actually undersize or the callipers are simply under-reading. If both the BB and BB shell are undersize then that's a problem as the PF30 "standard" is effectively pointless if no manufacturer is going to follow it.
In terms of the galvanic corrosion at the end of the video I think you're misrepresenting (or at least unfairly representing) what Hambini is saying. He isn't saying that he's never come across galvanic corrosion, he's saying that he's never come across someone trying to pass off a threaded interface as galvanic corrosion. Now whether or not his top cap is actually threaded onto the bolt I can't say for sure. Photos of certain ITM top caps appear to have a threaded section attached to the top cap (possibly pressed or bonded in but never seen one in person so can't say for certain) but they tend to have a black thread with a silver hex insert as opposed to a bolt threaded into the top cap and that doesn't line up with what appeared on his bike. Even if that is how his top cap is assembled that's not to say I necessarily agree with the rest of his headset service video.
Serious question, why do you run carbon cranks and carbon rims?
Edited to add: It's almost as if Hambini is creating perceived problems for the purpose of selling his own solution. 🤨
My thoughts exactly. 👍🏻
Don't bully that child,😂
Sorry 🥹
@@reginaldscot165😂
Another great video, thanks and keep them coming. Cheers!
You are welcome. 🙏🏻
Inserting Hambini‘s bottombracket doesn‘t sound really good. So much tension on the carbon frame. Does he really know what he‘s doing??? 😂
I’m not taking sides here, but, if you install a press fit BB and use retaining compound with activator as is common practice it will make a cracking sound as the retaining compound starts to harden very quickly as the BB is being pressed in. It’s totally normal and nothing to worry about.
@@clp91009that retaining compound doesnt harden quickly. Its not superglue. Cure time is in the tens of minutes or half an hour. The noise is definately from too much pressure.
I think he knows some things well, other things not so much. The problem is everyone thinks he knows everything and he believes it and perpetuates that myth. 🤷🏻♂️
@@gammelgemse I choose to let it cure fully for 24 hours.
Hambini just got exposed 😂😂
Yikes! 😳
Im pretty sure that the 'variable wall thickness' is a product of the way the frames are manufactured, if the BB is machined once the frame is built then any deviation from the actual centre of the BB will be highlighted in the variation of wall thickness on the BB. I.e. the centre of the BB is dead on spec.
The wall thickness means jack shit - the BB alignment and centre is what obviously matters. The fact the wall thickness does vary is a tell table sign that the frames are manufactured properly if anything.
Good and interesting points. I think that’s sound reasoning. Although I’d be surprised if the deviation in the bottom bracket shell was as extreme as 0.4mm from the welding side. Especially because it seems to be consistent across multiple frames. You are definitely onto something however. 👍🏻🙂 Thank you again for the informative comment. 🙏🏻
Yeah, can't say I'm super clued up on where they 'zero' the frame jig, I'd imagine it's probably the BB shell, so maybe you're right. Might be worth shooting a few questions to litespeed. It'd make an interesting video for sure?
Hammerini strikes again! 😂 I won't let Hambini hammer a nail into a piece of wood. I'm sure he would over do it with the wrong size hammer 🤣 Hello from the other side of the world, my friend. Long time no comment on your videos...
Hammerini strikes repeatedly! 😅 He doesn’t seem to know when to stop with anything. 🤷🏻♂️
Goddamn, thoought i was getting taught well by hambo. REALLY PISSED OFF.
Yes me too! And more people should know about it. 🤔
At 15:14 into the video Hambini uses a diameter gauge to check the diameter of a bottom bracket shell. 45.98 is visible handwritten on one end, yet he says "45.96" and you say he's made an error. This gauge is actually double ended - one end is 45.96 and the other end is 45.98, so Hambini is correct when he says 45.96, because that is the size of the end of the gauge that he inserted into the bottom bracket shell
That’s correct, I mentioned this in the following video about Hambini asking to fight me. 🙂 I think he should cut the BB to .98 as they seem a bit too tight. 😅
Loving the humor. All of my bikes are too old to have press fit, My Merlin Ti Road from 1992 has a Mavic 610 BB. Yes I cut/chamfered(with the correct tool) the BB shell to use this BB. Leaving enough threads if I choose to revert back to threaded cups. I love it when Hamfist slams things home with a mallet, no lube. Raw Dog !!!
He’s clearly not a gentle lover. 😅
Never get into a technical argument with a man who drives a Mitsubishi Pajero. One of the more important heuristics to live by.
I like it. 😅
"Hambini is about to tell you his final lie" xD
For this video anyway… 😅
Wow! You should be a criminal prosecutor. If you were, Hambini would be headed for jail.
Funny, my mother thought the same thing, I did study law for a short time but it wasn’t for me. 🙂
Hambini looks like he's flailing around taking cheap shots for clicks and likes. My respect for his channel is waning.
It’s his business model. And so far it’s been very successful. 🤷🏻♂️
I guess I used to think he did something of a public service, outing some shoddy build quality of major brands. I think his intentions are way more cynical now.
wow, bambini appears to have been well reamed.
Every time. 😅
I’d best get the popcorn ready for this one 🍿 😂
I see you stirring the pot. 😉
Reginald, I have been subscribed for some time now, and would like to pay you back in some way for all of the knowledge you so freely share. Do you ship products to Australia? Cheers, Gavin
No Gavin, but I have been thinking about it. The problem is Brunei is not very supportive of online business. The local banks are very unhelpful. But I’m looking into alternatives and if you keep watching the videos if anything happens you will be among the first to know.
Kind regards and safe riding,
Reg. 🙏🏻
This is either going to end up in court or the boxing ring. lol.
If a digital vernier is wrong, what is the right tool?
a three point internal micrometer.
Bore micrometer or Hole Gages I guess. If I was an engineer I’d definitely have a set and use them. 😉
@@reginaldscot165 Is it too expensive for you to be able to use it enough to not make it a waste?
Let it be... this is like children playing and then getting angry because the other keeps the ball for too long. Senseless.
So you consider rectifying misinformation and lies “senseless?” 🙂
"Trying to confuse a threaded joint with a corrosion of steel and aluminum, I have never heard anything like it before ", basically means he never heard somebody would confuse these two things, first thing being threaded and second being corrosion. And yeah he talked about corossion in other videos.
On other points to be honest you defend model you have in your head (maybe even correct, I don't judge this), but not the things you show. So for example regargin BB alignment.
Fact - you measured it 45.92, you say - it is aligneg.
Judging by facts presented it is not known to viewer if it is aligned or not. And this can continue with other examples through the video.
That’s your interpretation of what he said, he hasn’t questioned my interpretation even though he has viewed the video.
He has provided no evidence that the top cap is threaded.
I provided he lied about other subjects several time. With evidence.
I gave examples in the video that you can check regarding the alignment. 👍🏻
@@reginaldscot165 alignment examples didn't exist on your first video with bb, so nobody can say it was aligned just by measuring. I agree that it was because of further evidence, but we are judging exact video where we had only this 45.92
It is important for the cycle industry to have Hambinis. How can a company charge up to 5 thousand dollars for a frame with reaming imperfections!!!
This industry suffers from exaggerated marketing claims, from unfair pricing, elitist pervading attitude, so it is for the consumers’ benefit to have a spokesperson who keeps us sensical.
It is important we have people like that and we have many. Also people that don’t lie as often and don’t slander other people. PT for example.
@@reginaldscot165 I agree, but usually outspoken people without an “agenda” are “quirky”, crazier than “normal”, and will often say more than they should. Amidst the jokes, truths, realizations are revaled. So we can laugh and get some wisdom. Comedians are mostly exceptionally bright, see things from a different perspective, and are the best teachers.
@@pedrolahozhe does have an agenda. He wants to sell you £300 BBs.
No way most would pay such premium price for a bb unless desperate due to a faulty yet expensive frame. Hambini would not exist if frame manufacturers were honest and did their job right.
I think an old fashioned duel is needed to settle this. Sabres, Pistols, maybe fencing.
I think Hambini would win, he'd be a dirty fighter 😂
“Swords!? Only women fight with Swords! Men use cannon Sir!” Black Adder the 3rd. 😄
Thanks for bringing the “receipts” to his “talking points Reginald!!!
My pleasure. 🙏🏻
Hambini: to lie through one's teeth...
Merriam Webster definition right there. 😅
I think Hambini's cyclindrical bottom bracket measuring tool is actually 45.98mm on one side and 45.96mm on the other side.
If you watch the full video that I clipped you will see him try both tools in the hole. They are separate. 👍🏻
Actually you are correct, he has 2 tools with 4 different measurements. I will admit to this mistake on my next video. Thank you. 🙏🏻👍🏻
All good. Thanks for having a second look and responding.
I'm glad people are realizing that he's a monster.
Some people are, slowly. 🤔
No idea who is right but my intuition says a press fit needs to be tight. How easy you can drive your BB into your frame looks rather concerning.
Then, we are both wrong. Because he was suggesting my BB shell is too tight. 😅
@@reginaldscot165 as I said, no idea who is right, but my canyon grizl + original sram dub pf41 presses in well but makes similar sound to bambini. By far not as much and I don’t need excessive force as he seems to need but pressing in gives me good feeling about the fit that I am getting: good tight bond but still able to press back out. Just make sure the outer part of the bb hole where the bb touches the frame doesn’t have any grease to allow for perfect fit to the frame. You can achieve this by greasing the bb hole and not the bb cups (sram officially suggest this in their tutorials)
He is an impostor
I’m wondering….
It’s his hairdresser I feel sorry for.
I feel sorry for his “fans.”
Not taking sides but I think Hambini has two separate measurements sides to those gauges 15:10 ...the 45.96 is on the other side.
Yes you are correct. I will admit to this in my next video. Thank you. 🙂👍🏻
wow...This is probably the pettiest nonsense I have seen yet..I mean, state the facts, and keep it moving. If Hambini bothers you that much confront him in person or sue him, yet the crying is wild.
But this is more fun for everyone. 🙂
I love my Litespeed Watia. I did have to Loctite the T47 BB cups in (BBInfinite and Praxis) both kept walking out. i have a feeling that's from the T47 standard having such coarse threads. The owner of BBInfinite said it's normal. IDK.
Unfortunately yes. That’s why whenever someone asks on the Litespeed owners pages if they should “upgrade” to T47 I said stick with press fit. Everyone is scared of press fit but the problem is almost always carbon frames. 🙂
@@reginaldscot165 yeah, I like that King developed the T47 standard and i love threaded BBs, but in hindsight, I should have just gone with pressfit. Thanks for all your great videos and for singing the much needed praise for Litespeed.
Anyone who puts based uncle in a thumbnail gets my attention... o/
Ok 👍🏻
@@reginaldscot165 Love it... Am still watching the kebab shop man get reamed. ❤
You sure he's honest?
Oh very.
Sarcasm?
On a recruitment drive, Reginald?
Yes that’s the only reason. It’s not like he lied about me or anything. 🤪
@@reginaldscot165 He didn't lie about you Reginald. He used the data he has available and demonstrated why you are incompetent. These videos you produce reinforce that. Did that Volvo knock your brains out?
Good golly, that creaking sound reminds me of pulling rust crusted exhaust manifold bolts- when you hear that creak, you are a second away from snapping one off in the head.
It’s not a great sound and when I’m working on a bike I try to avoid sounds like that. It’s a sound that says “Hang on, wait a minute, something might not be 100% right here?”
I guess your subscribers must have dried up. So to get your subscriber numbers back up. I thought I would challenge you to a cage fight.
Engineers shouldn’t be guessing. Use all available information to provide an informed view, and include some quantitative and/or qualitative discussion/description of your uncertainty 🥸
Look forward to your point-by-point response Hambini 😀
I'm still a square tapered bottom bracket guy. However, as far as I know this Reginald Scot hasn't developed and sold a product. I take what he says with a grain of salt.
I guess you still haven’t proved all those patents and PHD’s you claim to have??
Naked
ohh boy, we got some playground drama in the cycling community... how do I get get wrapped up the youtube gossip so I can get some subs. lmao
Lol 😂
Hahahaha you hate each other don’t ya
For me no, I think hate is a bit strong. Personally I think he enjoys this, if he didn’t why would he not just stop lying?
is so filthy
Hope you like it?
@@reginaldscot165 yeah
Really trying to ride his coattails to more subs, eh? We'll see if it works. 🤷🏽♂️
You Hambini Catamites are just unreal.
@@reginaldscot165 I guess, but your coattail riding is _very_ real.
Where did you get your Engineering Degree from Reginald ?
I think you might have hearing problems?
@@reginaldscot165 Yeah, I have problems hearing your petty and rather technically pointless rants about Hambini. You’re obsessed with him and desperate for his attention.
Hambini is waaay more fun to watch, though...
Depends who you are I guess, personally I’m not a fan of the bad language. I much prefer the style of Peak Torque. It’s more reliable information without the unnecessary expletives. 🙂
If you don't like what he has to say, don't listen.
Just tune out. Maybe have your own channel on endless loop & you'll be happy.
You don't see the irony in offering advice you refuse to take yourself?
Thanks for the comment. 👍🏻
@@aarondcmedia9585 You have such a nasty character trait. You would be a lot happier if you recognised this & sought remedy.
@@returnofthenative more irony from the Hambini fangirl.
Well, well, well. How the turn tables.
Jealous much?
Not really my friend. In fact not at all.
Why don't you guys go on a date already and get it over with. You can finger each others bottom brackets with your bearing pullers.
I would but if his videos are anything to go by he doesn’t use lube! 😳
@@reginaldscot165 Haha, brilliant. This made me chuckle x-D
Boring.
Zzzzzzz
Stop watching youtube and go cycling or something!
Great video. I am sure that's not the last you will hear from him.
We all must suffer for the truth.