he has done a much more perfect job in a newer work on Renault Kangoo! I invite the viewers to see that one! Very clear was filmed and more better! Good job man, you have done great!
Vraiment vidéo bien réalisé.Quel patience, quel passion. Pas de son mais de belles images. Les scènes bien présentées. La pédagogie par l'image. Travail de pros.
@@WMCS I'm a police officer but in my spare time I like repairing cars of my friends and family. Changing timing belt together with water pump on Audi A3 and swapping rear axle on Peugeot 206 are my biggest achievements :) I have never been replacing the clutch yet but I hope one day I''ll do that thanks to your channel.
ania rutkowska that’s great to hear you’ve managed both a technical service with timing belt and a proper manual one with the rear axle ... I still find enjoyment in engine work in my spare time and weekends. ....
It's like watching an artist at work. A grubby job that not a lot of people would call an ideal job, but I'm sure it gives the mechanics a lot of job satisfaction when it's all done! 🙂👍
I will change the central slave cylinder clutch on my car Renault kangoo 2009 next week because I change the master cylinder clutch but the clutch it's really low I tried to release the air in the pipe but still low clutch sometimes there is no clutch at all I was really need to learn how to change it thank you very much to shear this good job
Super travail ! Je pense qu'il faut quand même être un bon mecano, pour se lancer dans cette opération. Personnellement, je ne sais pas si j'en serai capable, malgré que je bricole beaucoup. En tout cas, a te voir faire, ca parait pas compliqué bon travail encore
Just one problem with this demonstration. Would be accurate but what happened to the front subframe which is not mentioned in this video? The rear of the front subframe is there but not the front which makes it impossible to drop the gearbox low enough to remove the top gearbox mounts. A video of removing the front of the subframe would make this procedure possible . But thanks for putting the video on. 👍
Great job as always Kevin. This time the vehicle suffered a lot of rust which I think is very typical in your country. Like another comment Óscar Montero I am surprised that you never change DMF. Thank you very much for enlightening us.
colintx800 😃 it was pure bliss.. that was the worst day for weather. It was deluge outside that day with storm Dennis wreaking havoc... little joys of life heh😁....
I just did this took it out.im laughing becouse i got in for some tips and saw we did exactly the same in order haha.cheers mate,good stuff.also dude thats hardcore corosion in the discbrakes.you live in Austria or something?
Bonjour, tout d abord merci pour toutes ces explications vous faites de super tutos. J avais une question à vous poser.. Par quelle boîte à vitesse compatible peut on remplacer une jr5 301 sur un kangoo 1.5 dci 90 année 2013? Merci d'avance si vous me répondez.
Very interesting as usual! It was time for another Renault, my favourites. Was DMF ok? Do you usually jack up the car by lifting in the middle? Many thanks!
Hello kev.could you please help me on some advice.i need to change a clutch master cylinder on mercedes citan 108 2015 year..would it be easier to remove the whole pedal mechanism..or just the master itself..thanks kev..I changed 2 clutches watching your videos..your awesome.
david kenyon it was pure bliss😁.... little joys of life that comes out way sometimes. ... and it couldn’t have come at a better timing, storm Dennis was at it’s worst that day ... it was a deluge outside. ....😆
@@WMCS thanks Kevin. I'm not stranded away from home luckily. Parked at home. Just need to get this tin car to a garage next week. Unless ur very very local
Does the flywheel need changing in 1.500 cc diesels? I am asking because I thought in diesels the flywheel needs to be changed as well when you do the clutch
Hi there. Appreciate your work and time spent creating this clip. I need some information as I have same engine and gearbox model on my Mercedes Citan. Can I have your email address please. Thank you.
@@WMCS Got mine from Euro car parts ages ago it was on offer think i paid £150- 180 came with soft case, charger and 1 battery but they are cheaper now as new ones come out look on Ebay and SGS engerneering they can be cheap at times but don't buy a charger i've got a nearly new one you can have that only charges M12 batteries as i have another that charges M12 & M18 I'm in Essex we have messaged before
@@WMCS Thanks for quick answer! My car is 100 000 km (60k miles) and I started to feel the smell of burning clutch from time to time. Could this be a sign that I should change it soon?
he has done a much more perfect job in a newer work on Renault Kangoo! I invite the viewers to see that one! Very clear was filmed and more better! Good job man, you have done great!
Vraiment vidéo bien réalisé.Quel patience, quel passion.
Pas de son mais de belles images.
Les scènes bien présentées.
La pédagogie par l'image.
Travail de pros.
Thank you to show the bleed process ! We really appreciate the channel evolution.
Abis Ismael thanks for your feedbacks. I try and take on board all the serious suggestions.... always a pleasure to hear from you guys.
@@WMCS Would like to see the bleed process more. ty for the great work.
Nice that you decided to show how to use the tool to install the clutch. Good decision :) Thanks
ania rutkowska always great to hear feedback and definitely from your perspective. Do you do a bit of your own car repair
@@WMCS I'm a police officer but in my spare time I like repairing cars of my friends and family. Changing timing belt together with water pump on Audi A3 and swapping rear axle on Peugeot 206 are my biggest achievements :) I have never been replacing the clutch yet but I hope one day I''ll do that thanks to your channel.
ania rutkowska that’s great to hear you’ve managed both a technical service with timing belt and a proper manual one with the rear axle ... I still find enjoyment in engine work in my spare time and weekends. ....
It's like watching an artist at work. A grubby job that not a lot of people would call an ideal job, but I'm sure it gives the mechanics a lot of job satisfaction when it's all done! 🙂👍
Спасибо огромное за ваши прекрасные видеоуроки, очень познавательно.
Exceptionally detailed piece of videoing. Much appreciated.
Good speed job ! I do same work Monday / Tuesday for a neighborhood . I work more slowly of you but same good result 👍
Comme d'habitude,travail propre dans des conditions difficiles,merçi pour la vidéo
I will change the central slave cylinder clutch on my car Renault kangoo 2009 next week because I change the master cylinder clutch but the clutch it's really low I tried to release the air in the pipe but still low clutch sometimes there is no clutch at all I was really need to learn how to change it thank you very much to shear this good job
Super travail !
Je pense qu'il faut quand même être un bon mecano, pour se lancer dans cette opération.
Personnellement, je ne sais pas si j'en serai capable, malgré que je bricole beaucoup.
En tout cas, a te voir faire, ca parait pas compliqué
bon travail encore
Art is not only sculpture and canvas painters
Thanks for the support .,, I do take pride in my craft ...
Just one problem with this demonstration. Would be accurate but what happened to the front subframe which is not mentioned in this video? The rear of the front subframe is there but not the front which makes it impossible to drop the gearbox low enough to remove the top gearbox mounts. A video of removing the front of the subframe would make this procedure possible . But thanks for putting the video on. 👍
.
Great job as always Kevin. This time the vehicle suffered a lot of rust which I think is very typical in your country. Like another comment Óscar Montero I am surprised that you never change DMF. Thank you very much for enlightening us.
Judging by the springs in the clutch plate I would assume that it hasn't got DMF but I might be wrong
Hvala na videu
excellente démonstration et très bonne vidéo bien filmée, à priori le changement de l’embrayage devenait
urgent je m'abonne à la chaîne, bon courage.
homeo 5962 merci bien pour visiter la chaine... et pour votre feedback..
Perfect job mate you are a genius great video you deserve every penny you make 👍👍
Really appreciate the feedback Jamie.
merci pour la vidéo c 'est vraiment du boulot un embrayage...merci pour ton partage
Merci beaucoup
Brilliant you certainly know your way round an engine 👍 very interesting cheers
Если руки не крюки , то для себя будешь делать на совесть 👏👏👏👍
Merci a toi pour cette vidéo très complète , j'ai pu changé mon embrayage seul 👍
Excellent.., 🍻🍻🍻
Must be a bit nicer working undercover instead of worrying about the weather. We even got some extra clutch alignment tool action 😂👍
colintx800 😃 it was pure bliss.. that was the worst day for weather. It was deluge outside that day with storm Dennis wreaking havoc... little joys of life heh😁....
So very interesting to watch and learn
ninja mechanic?
just finished the whole video,total respect,regret initial dickhead comment.
I just did this took it out.im laughing becouse i got in for some tips and saw we did exactly the same in order haha.cheers mate,good stuff.also dude thats hardcore corosion in the discbrakes.you live in Austria or something?
عمل جميل و نظيف. أنت ميكانيكي ممتاز.
You certainly earn your money mate.
Bet your loving the weather at the moment, doing a great job by the way.
Nice job it could do with some front discs
yamaha ttr600 mate it was seized solid. Had to really put some effort into releasing them from brakes. .... good observation tho 😁
Maravilloso y bonito trabajo
Great Video , in the process of doing my kangoo atm .
Thanks you very much : all is shown, so it will help me a lot for the same job !!
Done !
Almost as "simple" as on your video, except for the extraction of the box... It's certainly because we don't have the same arm circumference 🤣
kevin --- superjet master!!!!
Excellent le travail et bien filmer 👏👍👍👍
Bonjour tu bosse très bien respect pour toi merci t es belle vidéo
Dominique Lhommel merci bien pour visiter le video.... j’espere que vous aller tres bien aussi....
Maestro Gracias desde Bogotá de gran ayuda
Bonjour, tout d abord merci pour toutes ces explications vous faites de super tutos. J avais une question à vous poser.. Par quelle boîte à vitesse compatible peut on remplacer une jr5 301 sur un kangoo 1.5 dci 90 année 2013? Merci d'avance si vous me répondez.
Very interesting as usual! It was time for another Renault, my favourites. Was DMF ok? Do you usually jack up the car by lifting in the middle? Many thanks!
معلم الله اعطيك الصحة خويا
Superb job sir.well done.
Excelente video, saludos desde Vzla.
Sehr sehr gute video
Well done mate you made a horrible job look easy
Great detailed video made much fussy work like a piece of cake.
Exelente video
Seems a shame to spend all that money on a clutch and hasn't even bother replacing discs and pads
Sérieux et pro❤
Hello kev.could you please help me on some advice.i need to change a clutch master cylinder on mercedes citan 108 2015 year..would it be easier to remove the whole pedal mechanism..or just the master itself..thanks kev..I changed 2 clutches watching your videos..your awesome.
Such a relief when it slides in , first bolt in eh Kevin?
İch mache mir über das aufbocken gedanken wie haben sie es gemacht das beide räder oben sind und wie hoch ungefähr damit man gut arbeiten kann
Good jobs m’y friend
Gracias por el vídeo me ha sido muy útil
What's your opinion on portable ramps? Too slow?
Super Video Respekt für diese Arbeit 👍👍👍👍cool
Nice job mate . but it would be more informative if you could tell us how many hours each jobe took u plz
Oh the luxury of being undercover ha ha 👍
david kenyon it was pure bliss😁.... little joys of life that comes out way sometimes. ... and it couldn’t have come at a better timing, storm Dennis was at it’s worst that day ... it was a deluge outside. ....😆
Very good 👍🏽 i think i should to wear protective glasses
Sudine Babz thanks for the review. I do sometimes but not the most practical of things but nonetheless very important
Exelente
مشاء الله دقة في تغيير الديبريابل
.
El volante es rígido o bimasa?? Me da la impresión que es rígido.
Renault Kangoo 2006 year, 1.5 Diesel video cluch replacement is?
with what liquid did the flywheel and the basket degrease before installing it is not a secret?
Brake cleaner.
@@WMCS Thank you
@@WMCS I wanted to ask the same. Thanks.
Very well made video for such tight spaces. Always in focus.
If you don't mind me asking, what is the red grease substance you put on, thanks
It’s red rubber grease.
Amazing as usual 😁😁
Máster. Saludos desde Chile
Bravo
I'm sat here in a dead van, watching this for the first time. Heck. No idea how I'm going to get the van to a garage
They’re not too bad to tackle. Otherwise I’ll get over to you.
@@WMCS thanks Kevin. I'm not stranded away from home luckily. Parked at home. Just need to get this tin car to a garage next week. Unless ur very very local
How long does it take to remove and replace this clutch?
a Year
excelent travaille
Tres bon boulot
frank marcus merci Bient...
Thank you
very good video
You just do the clutches ? but great job
Yes just clutches
Bitte sehen Sie eine Videoaufnahme des Citroen Picasso C4 Automatikgetriebes im Jahr 2015
Does the flywheel need changing in 1.500 cc diesels? I am asking because I thought in diesels the flywheel needs to be changed as well when you do the clutch
Only if it’s a DMF.
@@WMCS the problem is that I don't know if the Renault clio 1.500 diesel is DMF or SMF
How come you put red grease on the gearbox ??
Perfecto
Would love a breakdown of your tools. What impact gun is that btw?
Milwaukee M18 fuel 1/2 inch
How to change a clutch the real way
How long did that take start to finish?
I have to do it on a 2015, renault is one of the worst brands to work on .
excellent
The jack stand is quite bent be carfull
The brake disc is already quite flanged rusty ...
2021-04-17
Busy man??
Hi there. Appreciate your work and time spent creating this clip. I need some information as I have same engine and gearbox model on my Mercedes Citan. Can I have your email address please. Thank you.
Change front discs & pads. Ridiculous worn out
Please get yourself a cordless Milwaukee 3/8 drive ratchet Kevin
martin jones I’ve been wanting one for ages how much did you pay for your one.
@@WMCS Got mine from Euro car parts ages ago it was on offer think i paid £150- 180 came with soft case, charger and 1 battery but they are cheaper now as new ones come out look on Ebay and SGS engerneering they can be cheap at times but don't buy a charger i've got a nearly new one you can have that only charges M12 batteries as i have another that charges M12 & M18 I'm in Essex we have messaged before
👑👍👏👏👌
Those brake discs are awful.
Cool! 😀What is the mileage when it is time to change clutch on Kangoo? ⏲
Between 80-90k miles on average
@@WMCS Thanks for quick answer! My car is 100 000 km (60k miles) and I started to feel the smell of burning clutch from time to time. Could this be a sign that I should change it soon?
Bitte sehen Sie eine Videoaufnahme des Citroen Picasso C4 Automatikgetriebes im Jahr 2015