Seriously over the top. That said by a man that was heavily into audiophile equipment and recordings during the 70's and 80's. What a beautiful piece of work...a masterful blend of the art of science and engineering.
What about the "needle drop" at 17:10? Look and sound fake to you? That record is filthy and should be popping. Not one bit of surface noise. The needle (stylus) is still not even settled into a groove when the music starts. And the music starts during the lead in.
@@hyperluminalreality1 👍with you 100%. I noticed that music started while needle was still in lead in track. But it didn't register in front of mind...I was still dazzled by the bling of the machine. I couldn't catch the piece of music off the label. Wouldn't be surprised if not the same piece as video sound track. Still quite the machine.
@@hyperluminalreality1 it's a video - the person used the music for effect, agree it would have been better if they used the actual music from the record player. you'll also notice they cut into a later part of the track, that's way farther in the record than the 10 seconds that have elapsed in the video
First of all, love, then desire, skills, tools and resources. There is no failure, in the hands of a master every gramophone will see the light of day. Excellent!!!
Больше похоже на самоделку. Техника безопасности на станке отсутствует лезть руками в перчатке во вращающийся патрон шпинделя на 10:21 и особенно на 11:13, аж нехорошо стало. Затяжка винта 13:51 вообще порадовала. Кругом "тяп-ляп"' и как вишенка на торте - болтающийся тонарм на 14:45, 17:07 и чудовищный перекос иглы на 17:10 которая скоро крякнет на таком проигрывателе.
loved how he made each piece and how he made the tone arm that was fascinating ,I am well assured that turntable was very expensive to buy by a yahoo like me
Однако, как он смело работает в перчатках и подхватывает и протирает вращающиеся детали. А если накрутит на вал руку? Это же наверняка хорошие перчатки из прочного материала, а не из гнилья какого- нибудь! Я конечно понимаю опыт мастера, но все-таки ...
This is artistry at its best. The aesthetics. The design. The skill. The quality. The desire to achieve. The passion to get results. So amazing. Sadly I just returned from Seoul else I would have visited the factory and even bought one ❤ Thank you 🙏 for the sheer joy in watching this magical act.
Did he torque, or tighten? A micro torque wrench would add to the craftsmanship. measured correct torque on every fastener. Admittedly unnecessary, like the fake needle drop at 17:10. That record is covered in debris as can be seen. Not one pop and zero surface noise. The music starts when the stylus is still settling into the lead in groove also.
Me either. I agree on the hand craftsmanship. That is why the needle drop at 17:10 is so disappointing. The music starts when the needle is still settling into the lead in groove. The record is absolutely filthy and there is zero surface noise or pops. Not the real time audio.
За то что мужик старается, ему респект! А так это просто самоделка на шестидесятилетних станках с низким классом точности и с большим влиянием человеческого фактора, интересно за какие деньги фанаты LP покупают эти поделки!?
Лох не мамонт, лох не вымрет. Легенду про мастера постигшего дзен в горах Тибета и про смазку для проводов из соплей девственниц и жабьей мочи в полнолуние расскажут и лох расстанется с лишними дензнаками с чувством полного удовлетворения.
A skilled craftsman can compensate for a worn machine , this is not aerospace machining , it just probably costs like it is. After viewing the video, I know nothing about the design principles. For all I know it could be a guy with a machine shop saw a picture of a fancy looking turntable and imitated the looks, because about all I saw was rudimentary machine tools . I would have enjoyed a more complete production, that included how some of the universal design problems were addressed by this machine. doesn't;t really matter to me, I am not in the market , and I'm sure they have many happy customers
Красиво и навороченно. Но с точки зрения профи по расточной и фрезерной обработки данный диск имеет дисбаланс. Обкатка центрального отверстия не выдерживает критики, где стойка, где индикатор? Далее четыре отверстия сделаны на,, шармака,, без зацентровки из под сверла. Центровать нужно обязательно, сверло точно уведет в любом рандомном направлении, и лучше потом калибровать отверстия. На предприятии за это точно возврат отк, это в лучшем случае по Н15 и ниже. И конечно должна быть шлифовка поверхностей
Да, как токарь в давнем прошлом тоже могу к ста нюансам придраться. Хотя там только токарка и есть. Ну а фрезеровка вся заказная, видимо, на чпу. С технической и технологической точки зрения - прошлый век. Но сама ручная работа завораживает.
Istne dzieło sztuki. Mógłbym godzinami przesiadywać i patrzeć na niego, jak działa, jest cudny. To była uczta dla oczu jak Pan budował ten gramofon. Chyle czoła przed Panem.
saw a bunch of lathe and drill press work, which a child can do , and very little of anything else. Was kind of hoping that at least the tonearm would show the bearings used and how they are fitted. the drive belt is a particularly difficult item for most manufacturers , so I would have liked to see that, along with the motor, platter main bearing , structural supports, etc. and a picture of the thing at the beginning, so I would know what I am looking at instead of just a tour through the machine shop.
Sehr schöner Plattenspieler. Jedoch kann ich nicht verstehen, wieso man bei einem so schweren Plattenteller kein invertiertes Tellerlager anwendet??🙄🙄🙄 Viele Grüsse aus Germany
Is it just me but at 17:10 was the cartridge out of parallel to the record surface and did it not jump further out of alignment as it hit the run-in groove?
The needle drop at 17:10 is fake.The music starts when the stylus is still settling into the lead in groove. No surface noise on an absolutely filthy record either. That is not music off vinyl. Bad editing and nobody seems to notice or care.
Does an iron magnetized disk rotate under a cartridge? 17:07 is this how "rigid" a vertical alignment is? I would say that's a Chinese "hi-end" rather than a high-end of a healthy person.
Хобби
Seriously over the top. That said by a man that was heavily into audiophile equipment and recordings during the 70's and 80's. What a beautiful piece of work...a masterful blend of the art of science and engineering.
What about the "needle drop" at 17:10? Look and sound fake to you? That record is filthy and should be popping. Not one bit of surface noise. The needle (stylus) is still not even settled into a groove when the music starts. And the music starts during the lead in.
@@hyperluminalreality1 👍with you 100%. I noticed that music started while needle was still in lead in track. But it didn't register in front of mind...I was still dazzled by the bling of the machine. I couldn't catch the piece of music off the label. Wouldn't be surprised if not the same piece as video sound track. Still quite the machine.
I have no clue about audio technology and must say that I'm very impressed by the accuracy and skills of the master
@@hyperluminalreality1 it's a video - the person used the music for effect, agree it would have been better if they used the actual music from the record player. you'll also notice they cut into a later part of the track, that's way farther in the record than the 10 seconds that have elapsed in the video
When I start watching this video,I watch it all the way to the end.This man is master of engineering, beautifully craftsmen in turntable.
First of all, love, then desire, skills, tools and resources. There is no failure, in the hands of a master every gramophone will see the light of day. Excellent!!!
류대표님 반갑습니다
대표님이 만드신 턴테이블 사용 잘하고 있습니다
훌륭합니다
우리나라에 이런 장인분이 있다는데 큰 자랑입니다
This is what you can call a record player...fabolous work!
amazingly hand build from the ground up by himself, he got my respect.
Very nice to add the strobe markings on the platter. ALL hi-end tables should have them!
That's amazing !
Приятно смотреть на работу.
Больше похоже на самоделку. Техника безопасности на станке отсутствует лезть руками в перчатке во вращающийся патрон шпинделя на 10:21 и особенно на 11:13, аж нехорошо стало. Затяжка винта 13:51 вообще порадовала. Кругом "тяп-ляп"' и как вишенка на торте - болтающийся тонарм на 14:45, 17:07 и чудовищный перекос иглы на 17:10 которая скоро крякнет на таком проигрывателе.
Всё для развода лохов, которые до сих пор считают, что просветлённый мастер и сопли девственниц могут больше чем прецизионные станки с ЧПУ.
P.S.
В догонку. На 0:11 нормальная такая шербина под тонармом. Не выбрасывать же! И так сойдёт!!
Тоже удивился тонарму и кривизне головы
loved how he made each piece and how he made the tone arm that was fascinating ,I am well assured that turntable was very expensive to buy by a yahoo like me
알루미늄 주물가공 플레터라 드릴작업하니 부스러지면서 깍이네요..^^
저도 제품 사용자지만 제품의 장단점이 있습니다.
아쉽지만 가내수공업 이상 발전하긴 힘들다고 봅니다.
Nunca Ví algo asi. Que nivel de excelencia. Saludos desde Guatemala
this is a master... remember my granfather... he work like this handkrafter
Так захватывало дух, что чуть не задохнулся. Это нечто!!!!!!!
Однако, как он смело работает в перчатках и подхватывает и протирает вращающиеся детали. А если накрутит на вал руку? Это же наверняка хорошие перчатки из прочного материала, а не из гнилья какого- нибудь! Я конечно понимаю опыт мастера, но все-таки ...
This is artistry at its best.
The aesthetics. The design. The skill. The quality. The desire to achieve. The passion to get results.
So amazing.
Sadly I just returned from Seoul else I would have visited the factory and even bought one ❤
Thank you 🙏 for the sheer joy in watching this magical act.
и цена как у самолета.... ЧПУ сделал бы и точнее, и быстрее, и лучше...
A very stylish player
The combination of carbon and steel is brilliant.
Makes me want to get one of these.
I bet it not affordable for main of us...
@@mari0auseva That's for sure Mario .
Simply amazing what a work of art
Now that is a phonograph. Great job!
Uau!!! Isso não é um toca-discos. É uma obra de arte 😊 👏🏼👏🏼👏🏼👏🏼👏🏼
Have a good day. God bless everyone.
what we really need are new Lathe Cutting machines. Everyone is using the old lathe machines.
What we need is money to buy them. Anyway the work gets done right? 😎
Some of the best lathes, mills, etc are the old ones. Build so robust. Machines from the 40's and 50's where built to last forever.
@@xtrck yes, but they are hard to find and some are not in working conditions.
Flawless in every move.
Amazing skills another lost art
Piece of art !!!!! BRAVO
Amazing how talented some people are.
Nothing better then hand made
This is no exception to the rule
A true master
Excellent Engineering, womderful longlife a unique product in the field of music.
Costruirsi le cose da se, non ha prezzo. Bravissimo.
That is just brilliant engineering - love the way everything is hand torqued thanks for sharing 👏🏻👏🏻👍🏻
Did he torque, or tighten? A micro torque wrench would add to the craftsmanship. measured correct torque on every fastener. Admittedly unnecessary, like the fake needle drop at 17:10. That record is covered in debris as can be seen. Not one pop and zero surface noise. The music starts when the stylus is still settling into the lead in groove also.
Absolutely amazing! I couldn't take my eyes off it.
Me either. I agree on the hand craftsmanship. That is why the needle drop at 17:10 is so disappointing. The music starts when the needle is still settling into the lead in groove. The record is absolutely filthy and there is zero surface noise or pops. Not the real time audio.
Well, it's just music. It's worthy of a museum.
офигеть, это целый станок получился.
За то что мужик старается, ему респект!
А так это просто самоделка на шестидесятилетних станках с низким классом точности и с большим влиянием человеческого фактора, интересно за какие деньги фанаты LP покупают эти поделки!?
Лох не мамонт, лох не вымрет. Легенду про мастера постигшего дзен в горах Тибета и про смазку для проводов из соплей девственниц и жабьей мочи в полнолуние расскажут и лох расстанется с лишними дензнаками с чувством полного удовлетворения.
Правда что ли?) И как же в данном случае человеческий фактор и класс станков может повлиять на конечный результат?
A skilled craftsman can compensate for a worn machine , this is not aerospace machining , it just probably costs like it is. After viewing the video, I know nothing about the design principles. For all I know it could be a guy with a machine shop saw a picture of a fancy looking turntable and imitated the looks, because about all I saw was rudimentary machine tools . I would have enjoyed a more complete production, that included how some of the universal design problems were addressed by this machine.
doesn't;t really matter to me, I am not in the market , and I'm sure they have many happy customers
Respect from India excellent
Nice craftsmanship that has resulted in a cool record player, worthy of admiration
great craftman
Гений.
Круто, настоящий мастер.
maitre de la hifi fait main !!! bravo !!! superbe travaille !!!
3:10 탭핑 오일을 뿌리시면서 뚫으세요
탭핑 오일이 없으면 찌꺼기가 많이 붙고 발열이 심해지고 구멍 주변 부분이 파손됩니다
В ж... станки, с програмным управлением. Вот до революционные - это класс!😂
This was absolutely outstanding
Marvelous! Thank you.
What a beautiful pice of art wish I could afford one
A master piece turntable wow
INCREIBLE FELICITACIONES A ESTE ARTESANO DESDE CHILE MARAVILLOSO
Ну токарь и фрезеровщик знатный!😉
대단하십니다
Heavy machine ! Excellent
Как видимо счастлив этот дядька...
A good job of a Мaster for joy...
Фантастика! 👍 👍 👍
Monstrueusement magnifique !!!!!
Amazing and Incredible! 😲
καταπληκτικό!! μεθοδικότητα απο την αρχη μεχρι τελος!!
개멋있다!
quelle beauté , du grand art
Superb!!! I wish I can afford to buy one.
Μπράβο-μπράβο!!! πολύ καλή δουλειά, very-very good video bravo!!! fantastic. From Athens Greece (🇬🇷)
it's perfect.
All the amazing engineering they did was it to much to ask the editor to have the music come in once the needle was off the lead in track
Só a agulha desse Turntable Master já é uma dificuldade pra comprar.
awesome
아이리스 잘 사용하고 있습니다
Sure beats the Fisher Price record player I had as a kid.
Thankyou. Wonderfull.
Красиво и навороченно. Но с точки зрения профи по расточной и фрезерной обработки данный диск имеет дисбаланс. Обкатка центрального отверстия не выдерживает критики, где стойка, где индикатор? Далее четыре отверстия сделаны на,, шармака,, без зацентровки из под сверла. Центровать нужно обязательно, сверло точно уведет в любом рандомном направлении, и лучше потом калибровать отверстия. На предприятии за это точно возврат отк, это в лучшем случае по Н15 и ниже. И конечно должна быть шлифовка поверхностей
Да, как токарь в давнем прошлом тоже могу к ста нюансам придраться. Хотя там только токарка и есть. Ну а фрезеровка вся заказная, видимо, на чпу. С технической и технологической точки зрения - прошлый век. Но сама ручная работа завораживает.
Провода в тонарме без экрана или мне показалось?
Istne dzieło sztuki. Mógłbym godzinami przesiadywać i patrzeć na niego, jak działa, jest cudny. To była uczta dla oczu jak Pan budował ten gramofon. Chyle czoła przed Panem.
saw a bunch of lathe and drill press work, which a child can do , and very little of anything else. Was kind of hoping that at least the tonearm would show the bearings used and how they are fitted. the drive belt is a particularly difficult item for most manufacturers , so I would have liked to see that, along with the motor, platter main bearing , structural supports, etc. and a picture of the thing at the beginning, so I would know what I am looking at instead of just a tour through the machine shop.
Mind boggling
merci pour la musique ....thank you for the music ....
Sehr schöner Plattenspieler. Jedoch kann ich nicht verstehen, wieso man bei einem so schweren Plattenteller kein invertiertes Tellerlager anwendet??🙄🙄🙄 Viele Grüsse aus Germany
Una obra de arte 👌
Pure joy to watch
magnifico.perfeito.parabéns..valeu.
Great craftsmanship.... but too high end for me , I'll just continue to use my 1960's magnavox...
Мастер. Здоровья тебе, человек
у меня упала челюсть .вы большой молодец отличная и красивая работа.
Nice video, keep it up, thanks :)
Nice mechanical design, but I would prefer direct drive with feedback balanced needle system.
Вот это красота! Щидевр!👏
perfect👍👍👍
WOW!
I guess being belt driven doesn't matter when you have a gigantic flywheel.
Obra maestra sin duda
Is it just me but at 17:10 was the cartridge out of parallel to the record surface and did it not jump further out of alignment as it hit the run-in groove?
He is living my dream life.Having a over the top stereo system and making turntables for a living.Omg what a life
que dimais.muito proficional caramba.muito lindo parabéns.amei valeu abraços sucésso..
He’s not a craftsman he’s a genius
Вы маэстро 👏👏👏👍👍👍
I'm no audiophile, however I do love my LPs and I found myself holding my breath, in awe, at times.
The needle drop at 17:10 is fake.The music starts when the stylus is still settling into the lead in groove. No surface noise on an absolutely filthy record either. That is not music off vinyl. Bad editing and nobody seems to notice or care.
Super super super 😊😊😊
Thank you.
Техника безопасности отсутствует, нельзя на токарном станке работать в перчатках😮
👍💯
Massimo from Italy . Beautiful ! A true work of art! Is the arm unipivot? Compliments !
одноопорный тонарм, лучшее из решений!
Genialidade a flor da pele
Does an iron magnetized disk rotate under a cartridge? 17:07 is this how "rigid" a vertical alignment is? I would say that's a Chinese "hi-end" rather than a high-end of a healthy person.
Beautiful craftsmanship.
Really? Are you a machinist or a toolmaker?
In some ways this guy is a butcher.
This is coming from a fifty year precision machinist/toolmaker.
I wonder do they check the platter for fly wheel balance ?
TOP DEMAIS 😊😊😊