very clever trick with the thread cutting die, I've seen some heavy duty die's come with that as a standard, but I never thought to do anything with the smaller ones!
excelente los video estoy poniendo en practica todo lo que observo en los video para enseñarle a los jovenes comparto mis experiencia de mi trabajo cada dia aprendemos mas cosas nuevas, nunca terminamos de aprender
I still like making my own tools. It's especially fun when it saves a lot of money. Michaelangelo Buonarroti had to wait months for a shipment of steel blanks from Switzerland, before he could fashion his own set of stonecutting chisels.
I enjoyed your idea anf video , although its not something everyone would need or like i am a retired Woodworker that in my40s suffered a traumatic brain injury that caused some permanent paralysis in my left hand anf arm although i may never become a great Woodworker or as fast as i once was with only one good hand ideas like yours being a little strange or different then many other peoples way of thinking show me that no matter what type of physical handicap comes along with some strong determination and some ingenuity You can create a solution to overcome the obstacle
Great idea. Simple to make. Many times you don’t have a free hand to hold the nail. Remember; you have to remove the nut from the bolt without touching it! Sorry, couldn’t help my self. Lol!!
@@shaynegadsden Are you sure are available there? Because when I saw last time a movie about Pakistan on streets was guys with dead people teeth to fix them in the mouth of the living one, for an expense...
@@costiqueR you obviously missed the point they used a welder, Angel grinder and dremel to make a hammer all 3 of those machines even the cheapest Chinese units cost more than a hammer and then on top of the machine you need the welding rods, grinding disc, cutting disc and electricity factoring all this do you not see how silly you argument about the cost is
You made an expensive poorly balanced framing hammer, likely would have cost less to buy a high end/priced hammer than purchase all that and combine the time invested. The second idea is more novel, but still vastly cheaper and more versatile to put a chisel in a chunk of pipe and slot it onto one side of a c-clamp.
* * * And to put the icing on the cake, he hammers like l𝐥𝐢𝐠𝐡𝐭𝐧𝐢𝐧𝐠... not that he is fast, he just 𝐬𝐞𝐥𝐝𝐨𝐦 𝐡𝐢𝐭𝐬 𝐭𝐡𝐞 𝐬𝐚𝐦𝐞 𝐩𝐥𝐚𝐜𝐞 𝐭𝐰𝐢𝐜𝐞... (LOL) * * * Maybe net time he''l build-in a better aiming / targeting system... it's a bit hard to aim a piece of pipe... which is the greatest value of a store=bought hammer... the targeting system has been tried and has withstood the test of time... (grin) * * * Until that time. . .
Cela fait plusieurs vidéos que je visionne du même auteur , et il semblerait que ce monsieur n'a jamais entendu parler de la lubrification !!!! On perce , on taraude , et jamais une goutte de lubrifiant !!! Je ne lui confirai jamais mes outils !!!!!
La creacion es un don de la imginacion .me gusta RUclips por la creacion personal e imaginativa . Soy consciente de que RUclips me roba muchas horas casa dia Viendo los inventos caseros.el autor de este contenido el creador de una maquina que monta y desmonta todas las chavetas de las valbulas de culata en tres minutos. he patentado una maquina que Monta y desmonta las chvetas de las valbulas de culata en tres minutos me encantaria encontrar a algen enteresado.
Тухляк от начала до конца. Мозг меньше чем конец работает. Затрат куча, выхлоп ноль. Китайская плашка с направляйкой копейку стоит, а из метча лучше резец сделать. Да и гайку зубилом проще разрушить. Нагородил? Точить, варить, ломать.
Классное нае...алово с нарезанием резьбы,кругляки разного диаметра. Ну а про руки молчу. Уж очень понравилось закалка металла пластилина газовой горелкой. Гайкалом от бога не выше 14х гаек.
very clever trick with the thread cutting die, I've seen some heavy duty die's come with that as a standard, but I never thought to do anything with the smaller ones!
🇦🇮
Parabéns amigo show de bola 👍👍🏻🤝🤝👏👏👏
The threading guide is pretty good.
El segundo invento me a parecido una idea genial, a si la rosca sale derecha 👍 like
Corrales Racing
se mira buena idea d hacer
Assuming that every nail went in perfect and he never had to pull a tack or pry anything I guess it wouldn't need a claw to remove the perfection.
Micica ze jun crav
Acho pouco provável alguém perder tempo para fazer as ferramentas sugeridas, são de pouquíssimo aproveitamento.
Amazing, never ever saw this again..
Great video for repurposers to see possibilities in being creative!!! Thanks for sharing your experiences!
excelente los video estoy poniendo en practica todo lo que observo en los video para enseñarle a los jovenes comparto mis experiencia de mi trabajo cada dia aprendemos mas cosas nuevas, nunca terminamos de aprender
A forma de fazer a rosca ficou tope
👏👏👏👏👏👏
Muito bem pensado.
Parabéns
Very innovative ideas
I wanted to make the hammer, but I couldn't find a bolt that has a nut that moves by itself.
I still like making my own tools. It's especially fun when it saves a lot of money. Michaelangelo Buonarroti had to wait months for a shipment of steel blanks from Switzerland, before he could fashion his own set of stonecutting chisels.
I enjoyed your idea anf video , although its not something everyone would need or like i am a retired Woodworker that in my40s suffered a traumatic brain injury that caused some permanent paralysis in my left hand anf arm although i may never become a great Woodworker or as fast as i once was with only one good hand ideas like yours being a little strange or different then many other peoples way of thinking show me that no matter what type of physical handicap comes along with some strong determination and some ingenuity You can create a solution to overcome the obstacle
Great idea. Simple to make. Many times you don’t have a free hand to hold the nail. Remember; you have to remove the nut from the bolt without touching it! Sorry, couldn’t help my self. Lol!!
Nice. thank you.
CELSO NEM '
Vraiment ingénieux, comme quoi, il ne faut jamais rien jeter, tout peut resservir 👍. Bravo.
And Recycled ! Too ! Hey !
Exelente amigo. Mil gracias. Bendiciones para ti
Ah I have a store bought framing hammer that has a nail holder in it already lol.
je voudrais fabriquer une bétonnière avec peu d'éléments. merci!
A useful piece for centering the dies
Bom trabalho 👍👏👏
Gracias por instruirme en las innovaciones me han servido al máximo
Nice and fantastic video 👍😁
ㅒㅐㅒㅐㅐㅐㅐ
Parabéns ficou bom
Not really much for woodwork though
Woodn't working ideas
Qpyalslazkalssz
Yeah, I was hoping for scarf joints & figured wood & stuff, but still, it's cool to make a tool that works as good as what's in the store.
@stone xinda that doesn't match any documents
Bois
3:57 OK you made a roofing or framing hammer which you can buy for 20 bucks and yes they do have magnets to.
Yes, perfectly correct. Just don't forget they, there, get 20 bucks per month hard working...
So the welder, grinder, dremel and required expendables are in budget but a hammer is too expensive
@@shaynegadsden Good point!
@@shaynegadsden Are you sure are available there? Because when I saw last time a movie about Pakistan on streets was guys with dead people teeth to fix them in the mouth of the living one, for an expense...
@@costiqueR you obviously missed the point they used a welder, Angel grinder and dremel to make a hammer all 3 of those machines even the cheapest Chinese units cost more than a hammer and then on top of the machine you need the welding rods, grinding disc, cutting disc and electricity factoring all this do you not see how silly you argument about the cost is
los martillos traen ese sistema 😀😀
Very good sir. Thanks. Sir kaccha maggo cutter banaona.
Muito bem trabalhado.valeu!!
Về xxhcr daVs cước rtcfvcrtuwRst từ ff về r ac txstwwtt qaaf trc ưzb
Excellent concept for tapping guide.
me gustaron las herramientas.
genial.
La del martillo 🔨 no me gusta, pero las otras dos están bien.
Ohubfhbcc
Lo del martillo,NADA practico.
soper
You made an expensive poorly balanced framing hammer, likely would have cost less to buy a high end/priced hammer than purchase all that and combine the time invested.
The second idea is more novel, but still vastly cheaper and more versatile to put a chisel in a chunk of pipe and slot it onto one side of a c-clamp.
Not much woodworking involved here. Mostly "reinventing the wheel"...
cool tack hammer, just take another hammer to the sides of the handle to flatten it a bit, it makes it easier to steer.
That hammer costs more in electricity and tools consumption, than buying a factory made one...
Great idea!
Thank you. ;-)
Yes bro it is really great idea.
Muito bem bolado e todas possuem muita aplicabibidade, top!
What are the substances that put the shakos in it after protecting the iron to keep them pray
Well , no woodworking but liked your innovative idea😊😃
Gipsihlas
There are already framing and general purpose hammers on the market with the same features.
А если другой диаметр нужен- новую делать?
Напрасная поделка. Лерка нормально идёт и без направляющей. Но за старание лайк)
Так он еще и вороток ослабил на плашке, несколько нарезаний и он отломится. Болт-молоток также бесполезная ерунда.
💘 love you
From (PAKISTAN)🇵🇰
Assalamualaikum bhai Jaan.
Bhai Jaan please welcome to my channel.
Amazing how some people are always inventing things that already exist.
LOL!! That is so true : )
За старания лаик
👍
Fantastic!Baumarkt 5€ one hammer!
If you can't use a hammer for nails or a die properly for cutting threads put the tools back in their box go back in the house and watch tv
Better yet when you but a hammer pick one with a built in nail set .
Khan
Когда коту делать нечего, он себе яйца лижет.
Mast hai yaar...ideas sab achey hai 👍👍👍
Nice ideya
Thanks for the excellent teething idea
👍👍👍
carpenter hammers are made with nail chisel and magnet as a standard and the other side is used to pull them out....
When you don't have a hammer but a welding machine.
good! Желаю удачи в НГ.
*_Good work I like your ideas_*
SENSATIONAL!
GENIUS !!
Seen it but now i seen it twice
Muito bom
1-я приспособа-шлак,2-я и 3-я нужные задумки
What's the lequid you immerged the burned bolt in?
Oil
Properly done, oil quenching can add hardness & durability to worked metal.
Fantastic
avec un marteau c est mieux nul
h
Megusta
You are great man...
* * *
And to put the icing on the cake, he hammers like l𝐥𝐢𝐠𝐡𝐭𝐧𝐢𝐧𝐠...
not that he is fast, he just 𝐬𝐞𝐥𝐝𝐨𝐦 𝐡𝐢𝐭𝐬 𝐭𝐡𝐞 𝐬𝐚𝐦𝐞 𝐩𝐥𝐚𝐜𝐞 𝐭𝐰𝐢𝐜𝐞... (LOL)
* * *
Maybe net time he''l build-in a better aiming / targeting system...
it's a bit hard to aim a piece of pipe...
which is the greatest value of a store=bought hammer...
the targeting system has been tried and has withstood the test of time...
(grin)
* * *
Until that time. . .
Nice however I'd have an oval tube or have the handle with better grip not rotating in the hand.
Hitting that nail in slow motion made you miss 3 times
Good info..
Bem bolado
👏👏👏👏👏
Très bonne idée !@
That first item makes a really clumsy hammer. Do you realise the design and technology that goes into hammer manufacture?
Good ideas
Hi, I'm your new friend Big support ka.
good idea. . but as u see. . ur tools damaged the wood. .
Rody Ddy16
yes
надо одеть резиновый шланг на ручку будет ещё удобнее
Весь мир знает!С годов 40 прошлого века!!!
Z cyklu: "Rzeczy nikomu nie potrzebne"
nice idea.
It a great idea but very dangerous use a grinder that does not have a safety cover.
Parabens
TOP 👍👍👍
Nice
Azar
Maroc
do you made that thread cutter only for one size?and how you think is thread cutting a woodwork?or that bolt remover?😑
Первую поделку нельзя с молотка замостырить? Или обязательно Нано-болт?
Ötletes készülék, ügyes.
thank's
.
Good aidea
Un martillo 🔨 contra pendejos, excelente
Cela fait plusieurs vidéos que je visionne du même auteur , et il semblerait que ce monsieur n'a jamais entendu parler de la lubrification !!!! On perce , on taraude , et jamais une goutte de lubrifiant !!! Je ne lui confirai jamais mes outils !!!!!
Salut et si ce n'était que ça. Niveau bricolage qui ne sert à rien c'est pas mieux.
Во дурость с гвоздём и болтом офигеть
La creacion es un don de la imginacion .me gusta RUclips por la creacion personal e imaginativa . Soy consciente de que RUclips me roba muchas horas casa dia Viendo los inventos caseros.el autor de este contenido el creador de una maquina que monta y desmonta todas las chavetas de las valbulas de culata en tres minutos.
he patentado una maquina que Monta y desmonta las chvetas de las valbulas de culata en tres minutos me encantaria encontrar a algen enteresado.
Тухляк от начала до конца. Мозг меньше чем конец работает. Затрат куча, выхлоп ноль. Китайская плашка с направляйкой копейку стоит, а из метча лучше резец сделать. Да и гайку зубилом проще разрушить. Нагородил? Точить, варить, ломать.
Which editing app you use, iam your fan and a subscriber
😍😍😅 thankyou, i use filmora
La última está aplaudible, las otras no por que ya existen
Waste of time, for me as well for watching it....
Www.fime
Классное нае...алово с нарезанием резьбы,кругляки разного диаметра. Ну а про руки молчу. Уж очень понравилось закалка металла пластилина газовой горелкой. Гайкалом от бога не выше 14х гаек.
Wow he made a hammer. He better patent that before someone else does.
Very nice