I lost my password. How do i reset mu dvr. On front it say APRICA and it has a aHi 3520 chip. On mother board a sticker with 7808T -ELD 2016121504. Do not know where the jumpet reset holes 8s and no reserlt button
So I have a Qsee QC918B dvr, forgot password, Qsee as of Dec 2020 out of business. I found J1 but there are 4 spots 1,2,3,4, not certain if this will also work.It looks almost the same as you video with that exception.I unsoldered battery but still don't reset, will your procedure still work and should it be J1 pin 1 to 2 ?
I have the same dvr model and needed to reset the password. I opened up the dvr and tried shorting J1, J9, J2 (pins 1-2) but nothing. Were you able to reset the QC dvr and if so, what pins did you short? Any help will be appreciated!
good day . . if reset is done . . .how about d hard drive installed ? it will not re configure . . . .or re format again ? problem is there is file vid to be back up
5:52 Hi,Ji,DHI NVR4216-4KS2, I Found the J1 jumber in front panel only ( not in Mother Board) with one square and one Round shape, Shall I short that points?(for factory reset). you..Your video's great...Thank you..
@@benjemaamohamed4504 if there is no reset button on the main board, then try to find out the jumper for reset it. It could be near to the power button or surroundings of hdmi port.
que tal amigo, sabes? mi xvr estaba funcionando bien pero hoy lo desconecte por la mañana y en la noche que lo conecte de nuevo se ve la pantalla rosa y parpadea, lo cual no se ve claramente, vi tu vídeo, cres que si realizó el reseteo se componga? o si sabes que le pasó a mi xvr me podrías orientar? gracias y saludos.
@@BilalKhalid I thought of that, but if I check continuity my multimeter beeps when I press the button. I still tried shorting the pins, but nothing seems to do anything. It shows the logo when powered on, then the screen goes blank for a bit and the camera squares come on the screen, which is what it does without pushing button/shorting pins. I think this one is somehow locked down. I also tried desoldering the cmos battery to see if that might clear it, but that didn't do anything either.
Can you help me? I have a 16ch from stanley/dahua lost my password. No reset button and other jumper. I have 4 pieces. J1/c1/tvs1/tvs2 Shortcutting does not work
Subscribe To My Channel www.youtube.com/@bilalkhalid/?sub_confirmation=1
Defaults username and password is admin admin ? Or? Please answer this if you can,and THANKS TOO MUCH FOR RESET BUTTON 🙏🤲🙌
I lost my password. How do i reset mu dvr. On front it say APRICA and it has a aHi 3520 chip. On mother board a sticker with 7808T -ELD 2016121504. Do not know where the jumpet reset holes 8s and no reserlt button
bht videos dekhi but ap ki explaination bht ala hai
bohet acha maine try kra thank you dear
It works perfectly, thanks 👍🏻
It's worked thank you ❤
I just did a hard reset. Thank you,it worked.
Thanks for the Video Brother❤❤
It's working bro 😀
Thank you 👍
زبردست
thanks alot ,very use full
Good job... i Will try this metode. Thx a lot
Welcome sir
Thanks bro you are grate work💞💞💞
Thanks bro you genius it worked.
You're welcome!
iT WORKED, THANK YOU SO VERY MUCH
You're welcome!
thx you guys i reset my pswd by your help we love you sir
Thx
Really work Thanks
Thank you.
Thanks bro it's working
thank you so much.ill give you a big big hug😘😘
Always welcome
So I have a Qsee QC918B dvr, forgot password, Qsee as of Dec 2020 out of business. I found J1 but there are 4 spots 1,2,3,4, not certain if this will also work.It looks almost the same as you video with that exception.I unsoldered battery but still don't reset, will your procedure still work and should it be J1 pin 1 to 2 ?
I have the same dvr model and needed to reset the password. I opened up the dvr and tried shorting J1, J9, J2 (pins 1-2) but nothing. Were you able to reset the QC dvr and if so, what pins did you short?
Any help will be appreciated!
I got the same dvr I did it but it's not showing on the tv
Thanks...👍👍👍
You're welcome!
Merci 🙏🙏🙏
its realy good working
Thank you great help
Thanks sir you talk to you DVR reset password thanks
Great job bro.. thanks..
Thanks ur tips worked
You're welcome
broo very very thankful
Thanks sir for my help
Tnk u very much brother
Welcome
thanks for the video
Thank you so much! Thanks to you I was able to reset my system
Thank you very useful
you're welcome
thanks. I only set my DVR local so I never setting email or internet over it. I didn't think the reset will require this much trouble
thanks alot.it worked
good day . . if reset is done . . .how about d hard drive installed ? it will not re configure . . . .or re format again ? problem is there is file vid to be back up
Thanks 👍 your
THANK You sooooo much
You're Welcome
Thanks this video
Good Job My Friend
Thanks for the visit
Thanks dear
Welcome 😊
Thank You for the information. Will I loose the video's I have on it already if I reset it??? I have a Demerji DVR
No data will be save as it is
5:52 Hi,Ji,DHI NVR4216-4KS2, I Found the J1 jumber in front panel only ( not in Mother Board) with one square and one Round shape, Shall I short that points?(for factory reset). you..Your video's great...Thank you..
Спасибо 🙏
I have Dahua DVR. I found J1 but it has 4 halls. 1 square and 3 rounds. Which should i put together?
There is J7 ...Two holls...(1 square 1round) ..it will work..
Thx For sharing ,
If i reset the dahua, can i see the old record ? Or i will lose my data?
Yes, you can access your old data
@@BilalKhalid thx , have you a solution for doing a hard reset to the xvr5108hs?
@@benjemaamohamed4504 is it dahua brand?
@@BilalKhalid yes sir
@@benjemaamohamed4504 if there is no reset button on the main board, then try to find out the jumper for reset it. It could be near to the power button or surroundings of hdmi port.
Thank you so much👍
que tal amigo, sabes? mi xvr estaba funcionando bien pero hoy lo desconecte por la mañana y en la noche que lo conecte de nuevo se ve la pantalla rosa y parpadea, lo cual no se ve claramente, vi tu vídeo, cres que si realizó el reseteo se componga? o si sabes que le pasó a mi xvr me podrías orientar? gracias y saludos.
شكرا لك على الفيديو
thx, it worked.
Nice videos
Thank you
what is that device you holding for shorting those jumpers? thank you
Twezer
Nice tnx bro
Thanks thanks a lot
welcome sir
Thanks bro
Any time
Thanks g
Welcome
Bro if we reset this then all setting bcome reset or only password. I mean all recording also reset or no
Recording will not erase for sure. go ahead , thanks
Thax sir
You are welcome Sunny
Samsung nvr srn472s howe to reset
I don't have remote
Спасибо большое! очень помог
Пожалуйста
Thanks!! In my case, the J1 holes were hidden under a sticker
Glad I could help
This only for dahu company or all other company?
Only for Dahua
If hard reset this os also delete the video record ?
No, It'll not erase the data
This is not a password reset, this is a device reset, 2 very different things
wow what a discovery this years noble prize the best sh*t eater will be given to you congratulation
I have this model number N52B3P Dahua
Same steps
I need to open it ?
Thanks
Ok thanks 😊
No problem 😊
Good ho gaya
hi can you help?cenos dvr I do not seem to have a j1 port in order to follow your instruction.thanks
would you how to disable password setting?..i hate going thru this process each time i open the dvr..could you help.
Bro... The same board its not getting reseted, auto restarting itself. could u help out how to download this board's firmware..?
What if it has j1 has 4 holes do you short all those?
no no
*thx man i did it thx agian*
How yo reset cobra home security password?
Hello sir velvu hdr mai password reset kerna hai same process j1 or other plz reply
Find the reset button first on the main board
I try but its not working sir,
Is factory reset locked on some DVRs? I have the reset button, but it doesn't do anything on this N42B2P2 dvr, and I don't see any 2 pin jumper holes.
Sometimes button doesnt work due to dust and carbon inside button, If there is a button then try to short 2 legs of the button and try.
@@BilalKhalid I thought of that, but if I check continuity my multimeter beeps when I press the button. I still tried shorting the pins, but nothing seems to do anything. It shows the logo when powered on, then the screen goes blank for a bit and the camera squares come on the screen, which is what it does without pushing button/shorting pins. I think this one is somehow locked down. I also tried desoldering the cmos battery to see if that might clear it, but that didn't do anything either.
How about unbind with app have been assosiate to dvr before
Ser very very very very thnx 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 ser name plz
You’re welcome
good job
HI SIR Any ideas how to hard reset password? MODEL : TD 2708TS-CL PLEASE HELP THANK YOU
Can this step be using for hikvision dvr?
No
@@BilalKhalid anu solution for that ?
@@anip137 would like to see the clear image of main board
@@BilalKhalid can give email address.. I email to you .
@@anip137 +44 7468 967559
Hello sir, it is same for acumen dvr.
Thx
No it is not
I am from Trinidad and Tobago I bought a epcom dvr and it only asking for admin password of which I don't know please help me it is a 4 channel
Hi please help me with the dahua NVR 4216 , i seem not able to find the J1 jumper. Thanks
Can you help me?
I have a 16ch from stanley/dahua lost my password.
No reset button and other jumper. I have 4 pieces. J1/c1/tvs1/tvs2
Shortcutting does not work
Ronald Landman find J1 on board and short it as I showed in video
Can you help me with owsoo dvr password reset. Have seen the J1 tried to jumped it but its not working. Can you assist please
Hi , could help My Dahau NVX same version your, but it does not show display.
I have a DHI-XVR7208A DVR I can not find J1 can you help
hi ...Please can you help me to reset this model...EyeCam xvr4119
Is it by dahua?
@@BilalKhalid no :((
Try to find reset button on the main board
@@BilalKhalid i don't have button...give me your email so I can send you a picture of the motherboard
u are jenseeeeeee
TNX MAN
Do you have a solution for a Dahua DHI -NVR 608-32-4KS2. It does not have a J1 jumper. Looks like J16 with 3 jumper points. Could you assist pls?
Buenas tardes cuanto tiempo tenemos que presionar el reset?? por favor me podrían colaborar por favor
20 segundos
In all dahua xvr/dvr has same jumper number J1, pls reply
No
@@BilalKhalid how to reset xvr4b16
Brother in mine xvr j1 is opposite site and different from as you shown but as you shown j1 jumper in mine its j7.
What should I do
Do you want to reset password or what?
Gracias!!!
What is the mobile application for DISVU nvr
Hey man please help me. I have problem with my dalhua DVR. It's stuck. No o reset button but either the J1
Any idea how to reset xvr7104 . Same pins is on J8 but dont work...
my j1 has 4 holes i have tried various combinations of two holes without success
You need to do all 4 at the same time
hello I have a dvr march networks 4316 it does not have the reset button how can it be