DIY: Bigger & Brighter LED for Amp Research Power Steps from ORACLE Lighting! True White Rock Lights

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024
  • Unsatisfied with the dim bluish lights from your Power Steps? Want more lighting that matches your factory LED True-White color? Looking to see better and further when entering or exiting your truck at night? Follow this easy and quick upgrade from ORACLE to mod your Powersteps with our LED Rock Lights.
    The ORACLE True White LED Rock Light modules use high quality Cree XQ-E chips and expertly-engineered components. You get our 4 intensely bright white rock lights in a kit for the same price as other brands who charge up to $100 per light. Get the same brightness and quality for a fraction of the price with ORACLE Lighting underbody LED white rock lights!
    Get them here:
    www.oracleligh...

Комментарии • 17

  • @robertrobinson-w2x
    @robertrobinson-w2x 18 дней назад

    Great video but the music gets irritating

  • @30anerds
    @30anerds Год назад +1

    Can these be used with factory Ram limited running boards? The retractable ones?

    • @ORACLElights
      @ORACLElights  Год назад

      Yes, those are the same process as the AMP steps.

  • @chadthompson8043
    @chadthompson8043 11 месяцев назад +1

    How long are the screws that you used?

    • @Ohkayechill
      @Ohkayechill 10 месяцев назад

      Number 6 3/4 inch screw 1:20 seconds

  • @freddynorman
    @freddynorman 5 месяцев назад

    I have questions. I got the lights today. The video says not to use the rubber spacer pad. Clearly in the video the pads are used. If I don’t use the pads, how does the light wire not get in the way of a flush mount? Before I send them back, I’d like to know.

    • @AACstyle
      @AACstyle 5 месяцев назад +1

      See 2:50 of the video, the wire is behind the pod and you tighten down the screws. We have done this install with and without the pads on customer trucks. If you use the pads you need to be very aware of where you mount the pods because the step may contact the pod when it comes up. Its not going to hurt the light but can maybe wear a spot on the step after a while. These are super bright compared to the factory setup, well worth it!

    • @freddynorman
      @freddynorman 5 месяцев назад

      @@AACstyle I think some of my confusion is that mine came with two sets of rubber spacers. And the way they wire connects to the light, it’s will not sit flush with the truck without the one spacer. I definitely don’t want any rub. Any further info?
      Thank you.

    • @AACstyle
      @AACstyle 5 месяцев назад +1

      @@freddynorman if you don't want to worry about rubbing I would leave them off. The screws will sinch everything down, it will not be 100% flush but it works fine without the spacer on the ones we have done.

    • @freddynorman
      @freddynorman 5 месяцев назад

      @@AACstyle thanks for your help.

    • @antnope3042
      @antnope3042 3 месяца назад

      How do you like it? Was it worth the money?

  • @Vinnie45acp
    @Vinnie45acp 8 месяцев назад

    What are physical dimensions of these? Putting on a 2022 F150 with power steps

    • @ORACLElights
      @ORACLElights  8 месяцев назад

      These are approx 2.5" x 1.5" x 0.5"

  • @RichPrivilegedWhiteMale
    @RichPrivilegedWhiteMale Год назад

    Whats all over your gas tank? Expanding spray foam?