BOSCH GCM 350 254 mm Professional Sliding Mitre Saw
HTML-код
- Опубликовано: 11 окт 2024
- Tool used in this review - amzn.to/2UTdJv4
Hi Guys, in this review I showcase the BOSCH GCM 350 254 mm Professional Sliding Mitre Saw and talk about its performance.
To find out more about the product visit-
www.bosch-pt.c...
To see more of my stuff you can find it in the usual places below -
Follow OurBuild FOR DIY & Tool Reviews -
www.instagram....
/ 501183953335817
/ ourbuild
Follow - RENOVATION JUNKIES - For Ideas and training.
Web - www.renovationj...
FaceBook - www.facebook.c...
Instagram - www.instagram....
Twitter - / reno_junkies
Thanks Guys, you rock!!!
First time I used mine at 45 degrees I forgot to move the backing plates out and cut a piece off one..fair play though went through it like butter.
Ha ha! I did the exact same thing. And my first thought was also the same - it's smooth! :D
i would like to thank both of you who said it ,so glad it wasnt just me :))) ohhh the burden i kept these past couple of years :)))
Hi, I notice this has belt drive. Is it more quiet than direct drive miter saws? Thanks,
This test is only if you want to saw with a precision miter saw. (not for rough work).
Tips and Test:
Very important if you would like to saw with precision. (avoid torsion as much as possible)!
Always choose a Miter saw with a handle positioned in a vertical line above the saw blade.
Everything must be aligned, slide rails, handle, and saw blade,it is much better this way the blade will not tilt.
Because there is some torsion in the aluminum housing .
And choose an engine with softstart on it to prevent wear of the gear and worm shaft.
It is very important that everything is aligned.
Here are some examples to show how the handle must be positioned above the blade.
Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / Bosch GCM 8 SDE / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact / Bosch PCM 8 SD / Hitachi C10FSH.
(This also is the case with the Miter saw without the slide rails).
(If you want). You can test it yourself at home if there is torsion in the aluminum housing.
Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood about +- 20 mm thick to this with the normal handle positioned on the right side of the Miter saw (the wood it will remain in place until the test is completed).
Step-2. Then repeat this by pushing the saw blade down with your hand (finger) on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine.
Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing (test is completed).
Step-4. therefor it is much better to choose a Miter saw with the handle positioned vertical in line above the saw blade.
Conclusion: how further away the handle is from the saw blade how more chance of torsion in the aluminum housing.(don't go for that).
Also with a cheap slide miter saw it is still better the handgriff in line a above the saw blade than on the right side. Maybe they will make it someday then we have a winner...
Very nice overview, thanks
Thanks mate, glad it helped!
Hello. I’m in two minds on which Bosch metre to go for. I need a mitre saw to to cut picture frames moulding with the height of 85mm moulding. Would this saw be perfect for it or shall I go for the less expensive version? Many thanks
merci pour cette vidéo même si je ne parle pas anglais
Great saw, did you mention variable speed? I’m in the Uk and have variable speed, quick blade lock and it comes with their blue 60t blade. Great review though :) dust extraction is good also...
The dust extraction is great on the saw!
bosch 350-254. I don't see the laser . how do I adjust it?
Tx !
which one would you choose bosch 350-254 or makita model??
great video thanks
Good video, thank you.
How is the accuracy?