Yes they cut the frame and bend the rear section down at the factory but that’s before the frames are heat treated. However it doesn’t matter because it’s on a section of the frame that isn’t load bearing.
Been watchin bruce for years now, open thousands of boxes and just always think dam boy buy a knife and make it it an everyday carry item. 😅 love the new cabover.
Bruce, those air horns are adjustable for pitch. Grab the neck and turn the back to loosen then you can adjust it for and aft to get the pitch you want 😉
Hey Bruce, if it's not too late, you should put Raptor liner under the half fenders so that rocks don't dent them and protect them. I hope your relative enjoys it.
Cool that cummins stores the odo reading on the ECU. Late 90's to mid 2000's BMW's used to store the reading on the ECU, LCM, and body/seat module which makes it really easy to tell if someone tried messing with it because if all 3 don't match you'll get a dot on the gauge cluster. And most people messing with odo readings aren't going to put in the effort to make sure it all checks out. Unless they specifically tell you one of the modules has been replaced without recoding it you'd always know it was tampered with. If nothing else you could haggle the price down and if you're in Europe an M57 with 500k on it is barely broken in lol.
@bruce get yourself a “Ceramic Weld Backing” to block the holes that you’re filling with the MIG. You can find them on the internet or at welding shops.
Going to be a give away. It's going to be awesome. Going look nice. Awesome you are going to keep it looking stock. Keep up the great work and video's.
33:33 💯👍👍👍Time is money and wasting time to rescue some screws or a window or a switch does not make sense. Maybe in a third world country where every screw counts, but there you have all the parts you want to repair those Trucks.
Man you got a big facility man you could have lifts in there machining for engines all kinds of stuff you can get man I can't wait to keep watching you and see you grow into that place
Not going to lie, this Pete and your old blue collar are my favorite trucks that you have owned so far! Don’t get me wrong I like the other trucks you have but you really can’t beat a classic truck.
Idk what the plans are for it, but it would be pretty sweet if it involved either dropping one of those x15s you have in it or maybe a scania power plant for it and drive train.
Hi again Bruce, just a suggestion, but why don't you try laying down a couple of Tires and rest the chassis on them. Protecting engine sumps, and what ever else. Cheers mate.
He'll the tank could be something for around a farm or make a cart for portable fuel tank be nothing to just plug the hole either fuel gage of sort or just another way for connection.
I think a lot of people aren't sending in for merch cause "Blue Collar" had a new engine & clutch. Maybe their scared of it cause it may end up have "Wiring" problems I don't know. Good Luck to Ya!!!!! At the same time I hope "I Win It Yeeeaaahhh"!!!!!!
I’m having fun watching y’all work on the Large Cars. I wondered as well why you didn’t try to salvage the driver’s door window on the Freightliner you dismantled with your telehandler, but I ain’t losing sleep over it. Then on the other hand it seems more people are wanting to drive like a wreck looking for a place to happen, even some Rig drivers I hear our dispatch describe over the radio driving like they lost their damn minds. So you’re, sho nuff, going to have plenty of parts and donor vehicles available.
If it's another giveaway truck I'd be surprised. But also super stoked, especially if they try to keep it looking classic! Would be awesome to see it working.
I love to see you guys Give a semi to Blake. I think it'll be a good idea if you can help them out. I'm having a nice trailer for events. His race truck and maybe you guys team up on buying race trucks together and building them to come up with your own designs. I would love to see you guys work together on some designs.
You need some engineers chalk that you can grind & sharpen to a point to accurately mark out that frame rail or a scriber to scratch the cutting marks in.
Idol Bruce always ur vlog very nice vlog about truck all vlog u post I open my phone to viewing ur vlog in the philipine idol shout out to my family in sta mesa manila phili. Tnk u idol Bruce from Mr. Jaime Dela Cruz all ways watch ur vlog
What you are doing to Hank will look realy great. A little chaotic your style of work but ok it´s your style. Getting good parts of the wrecks is a realy good idear. That you intend to give the engines a good bill of health is a good and will give you a good reputation in the business. You are right by saying that parts which take a long time to remove and give you only a small profit are not worth the time.
Is there much of a weight difference between the steel 5th wheel and the aluminum 5th wheel? Otherwise, out of curiosity, is it only visual ascetics that prompts the "expenditure of resources"?
Save every window they will sell fast. I have a friend that owns a glass business and he cant keep enough semi windows in stock new or used they go fast.
3:48 and I thought "this big ol' piece of metal " was part of the chassis structure. Of course you can just cut it out. It's probably useless. It should be alright without it. Them wheels will still turn afterwards. Just get rid of it!
Hank needs to stay around. Sell the trattor taxi and put that money into Hank and build a super nice cab over show truck. The scanias are cool but the old Pete’s are cooler.
wow bruce the move you made to tennesee stepped your game way up i sincerely wait in anticipation for your videos im loving the content many thanks from a fellow diesel mechanic Nigel
Yes they cut the frame and bend the rear section down at the factory but that’s before the frames are heat treated. However it doesn’t matter because it’s on a section of the frame that isn’t load bearing.
23:36 It looks great Bruce good job
Been watchin bruce for years now, open thousands of boxes and just always think dam boy buy a knife and make it it an everyday carry item. 😅 love the new cabover.
I know 😂😂
Gibbs rule #9
@@Bruce_WilsoniZ&%က(xyoauhxxZOsx?းျဿ
Bruce, those air horns are adjustable for pitch. Grab the neck and turn the back to loosen then you can adjust it for and aft to get the pitch you want 😉
Hey Bruce, if it's not too late, you should put Raptor liner under the half fenders so that rocks don't dent them and protect them.
I hope your relative enjoys it.
I’m loving this I’m new subscriber but I’ve been here since 2019 and I’m loving the buying old trucks and fixing them up
Cool that cummins stores the odo reading on the ECU. Late 90's to mid 2000's BMW's used to store the reading on the ECU, LCM, and body/seat module which makes it really easy to tell if someone tried messing with it because if all 3 don't match you'll get a dot on the gauge cluster. And most people messing with odo readings aren't going to put in the effort to make sure it all checks out. Unless they specifically tell you one of the modules has been replaced without recoding it you'd always know it was tampered with. If nothing else you could haggle the price down and if you're in Europe an M57 with 500k on it is barely broken in lol.
I love classic COE semi trucks 🚛 they were popular when I graduated from high school in 1985. 🙂
plasma cutter and you can get it done i use to do this type of work take old king pin and make a lift tool.
Fab up a fifth wheel tool. Snag a king pin off of a junk trailer and weld it to a piece of square tube that will fit over one of the the forks
@bruce get yourself a “Ceramic Weld Backing” to block the holes that you’re filling with the MIG. You can find them on the internet or at welding shops.
Going to be a give away. It's going to be awesome. Going look nice. Awesome you are going to keep it looking stock. Keep up the great work and video's.
33:33
💯👍👍👍Time is money and wasting time to rescue some screws or a window or a switch does not make sense. Maybe in a third world country where every screw counts, but there you have all the parts you want to repair those Trucks.
Man you got a big facility man you could have lifts in there machining for engines all kinds of stuff you can get man I can't wait to keep watching you and see you grow into that place
I always put tiny bit of grease inside of metal lug covers,keeps em from rusting
It's the next give away truck.🙂😀😃👍 Yes you can modify the back end of the frame because Matt on Diesel Creek did the same thing. 👍
Not going to lie, this Pete and your old blue collar are my favorite trucks that you have owned so far! Don’t get me wrong I like the other trucks you have but you really can’t beat a classic truck.
I like your leadership skill. The guys who work you are lucky to have you as a boss
Idk what the plans are for it, but it would be pretty sweet if it involved either dropping one of those x15s you have in it or maybe a scania power plant for it and drive train.
Hi again Bruce, just a suggestion, but why don't you try laying down a couple of Tires and rest the chassis on them. Protecting engine sumps, and what ever else. Cheers mate.
He'll the tank could be something for around a farm or make a cart for portable fuel tank be nothing to just plug the hole either fuel gage of sort or just another way for connection.
I think a lot of people aren't sending in for merch cause "Blue Collar" had a new engine & clutch. Maybe their scared of it cause it may end up have "Wiring" problems I don't know. Good Luck to Ya!!!!! At the same time I hope "I Win It Yeeeaaahhh"!!!!!!
Bruce man you should keep that thing that'll be the only American cab over you have
Hi Bruce. Great entertainment and video content. Keep it up boys. Julian U.K
I know where there's a 98 k100 for sale in Brooksville. Runs great
I’m having fun watching y’all work on the Large Cars. I wondered as well why you didn’t try to salvage the driver’s door window on the Freightliner you dismantled with your telehandler, but I ain’t losing sleep over it. Then on the other hand it seems more people are wanting to drive like a wreck looking for a place to happen, even some Rig drivers I hear our dispatch describe over the radio driving like they lost their damn minds. So you’re, sho nuff, going to have plenty of parts and donor vehicles available.
Loving the way Hank is coming along.. all these builds are great
Looking good keeping it traditional on the pete cabover
@BruceWilson a suggestion that tank that was damaged could be converted to a custom bbq pit as a diy project.
I like how u fix up Old trucks😊
100% a giveaway truck and its going to be amazing 👌
If it's another giveaway truck I'd be surprised. But also super stoked, especially if they try to keep it looking classic! Would be awesome to see it working.
I love to see you guys Give a semi to Blake. I think it'll be a good idea if you can help them out. I'm having a nice trailer for events. His race truck and maybe you guys team up on buying race trucks together and building them to come up with your own designs.
I would love to see you guys work together on some designs.
Hey Bruce if I where you I would keep Hank the Cabover so you will think about when you started your channel with Blue Collar the Cabover.
That truck would look good with some 6 inch angle cut exhaust stacks. 👍 To replace the ones on there now.
You need some engineers chalk that you can grind & sharpen to a point to accurately mark out that frame rail or a scriber to scratch the cutting marks in.
Test stands for the engines and APUs so when they come in and get pulled, looking 👍🏼
Bruce, it looks like you are having a ball! It's your business, so you can do what works!
Yes it's worth the time.
Nice lookin 352 Pete. Maybe add some in-frame storage boxes
TANK'S FOR STARTING MY RACE TEAM !!! F.C.R !!!
You need to promote Fitzgerald Collision more on a consisitent basis, all is good, just a recommendation..
Bruce you always make it work. 🙂
Why not use a angle grinder and a cut off wheel for a nice straight cut vs blue wrench
You could use your kingpin to ball adapter to lift the fifth wheel
Idol Bruce always ur vlog very nice vlog about truck all vlog u post I open my phone to viewing ur vlog in the philipine idol shout out to my family in sta mesa manila phili. Tnk u idol Bruce from Mr. Jaime Dela Cruz all ways watch ur vlog
5th wheel tool just a 5th wheel pin from Amazon, weld a clevis to it like a popsicle
What you need is an old fifth Wheel pin with a flat plate with an eyelet on the top
Welcome to power truck show🎉
You could start the Kentucky Derby with that horn!!
Hi Bruce , another great video , thanks . can you give us an update on the tractor taxi , have you sold it ?
U going give it a way
Ficou ótimo maravilha 👏👏👏 parabéns
Put a secondary foot switch for the air horn!
You boys are doing a great job of putting this Tractor together mate. Keep up the great work Bruce,cheers.
What you are doing to Hank will look realy great. A little chaotic your style of work but ok it´s your style.
Getting good parts of the wrecks is a realy good idear. That you intend to give the engines a good bill of health is a good and will give you a good reputation in the business. You are right by saying that parts which take a long time to remove and give you only a small profit are not worth the time.
Looks good so far.
Yall should make a big grill for the shop out of one of the scrap fuel tanks. Maybe even pellet smoker style like Treager
It would be a great giveaway keeping the old stuff alive😊
Not long now until 1 million subs.
U need to give that cab over Pete to ur little brother Ryan so he haves his own truck
Put a headache rack on old Hank so you can store stuff in it
Chrome don't get you home ! 😅
Nice peterbilt
Give away truck!!! Did they change the hubs over on hank, or do a cut off? You put hub pilot wheels on and that truck should of been stud pilot.
BRUCE'S Favourite Word
While LAKE'S doing that or when LAKE'S done that 😂 Bruce would be fcuked without LAKE!!😊😂
We all need lake in our lives 😂
Bruce's dream home is a cottage with its own lake.
Man I like that cabover pete.
Yes Bruce fix it i know i will take Slow and take long butt i finist the truck 😊
Super cool video nice job 👍👏🥰🇨🇿😉
Dude, what the actual fuck was the point of the "template" if you were just gonna measure the cut?!? 😂😂😂 Absolute lunacy.
Is there much of a weight difference between the steel 5th wheel and the aluminum 5th wheel? Otherwise, out of curiosity, is it only visual ascetics that prompts the "expenditure of resources"?
Save every window they will sell fast. I have a friend that owns a glass business and he cant keep enough semi windows in stock new or used they go fast.
Hey, Bruce. 👋
The electric trucks, why cant they be converting back to diesel trucks?
Cabs look mint & I'm sure you would easily get the parts.
Take. The Gold in comps
Like I said before. It's a survivor leave it alone !
3:48 and I thought "this big ol' piece of metal " was part of the chassis structure.
Of course you can just cut it out. It's probably useless. It should be alright without it. Them wheels will still turn afterwards.
Just get rid of it!
Possibly a Scania V-8 in the Pete's future
Beautiful truck.
This memes between the classics phrases are hilarious 😂
keep the clips coming
Love that pete
Invest in a good quality plasma cutter.
Hank needs to stay around. Sell the trattor taxi and put that money into Hank and build a super nice cab over show truck. The scanias are cool but the old Pete’s are cooler.
Bruce you buy good truck men
sure you put the plug in that front bearing hub?
When will this one be given away or sold?
Hey Bruce, can you give a link for the rear hub covers with the foam mount?
U need to give it to ur little brother for his first truck
What brand are those hub covers with the foam? And where did you get them from if you don’t mind me asking
Lake is hitting the road
Good looking ride
U need to make a engine stand for starting up the engines
She be looking way much gooder after your gooder work.
Love Kank I wood like to drive it
do you resell old part that what chrome shop use.
Bruce, after spending time in Jail, you have come a long way.
Hey man, can’t let our lowest points define us😊
Put a tool box behind the cab to cover up the Blank Spot
Gotta put the pete wheels back on
Hey put that APU on Hank
wow bruce the move you made to tennesee stepped your game way up i sincerely wait in anticipation for your videos im loving the content many thanks from a fellow diesel mechanic Nigel
Giveitaway, giveitaway, giveitaway, giveitaway, now, like it's a Red Hot Chili Pepper 🌶🌶🌶