If you want genuine Honda parts, us a Honda dealership. Yes it will cost more but you will get the real deal and your bike history will be 100%!! so if you ever want to sell up the history can be just as if not more important than the bike. Good video, very informative, i think i will keep clear of DC Parts.
Thanks for the comment, I do usually go directly to the dealers with service and genuine parts but as a performance upgrade it's only available via none official outlets but as advertised presumably was an genuine Honda part. They did refund me and I didn't have to send the part back but if you were to have fitted this then didn't check for another 1000 miles it would of been in a terrible state.
Hello bud. Recently commented on the facebook post of mine on forzazowners. John lapworth. Im like 22 stine ish deab but 6ft 5. On a level grade using a roads stabdard setup i am doing just over 75 standard moh at the max with me ib it. Fast enough though. Its going in for its 8k service on the 3rd as I think I said. New back tyre etc. But the rollers apparantly get looked at when at 8k. So if I ask them to switch them out will it bring down top end? Sounds like a good investmwnt though. Same top speeds for less fuel
Your vids are brilliant mate, thanks. I have the Forza 125 2023, what brand of exhaust andVariator rollers would you recommend? Don't know what you do for a living, if you don't tune scooters you should, people are crying out for your skills, good luck mate and thanks again for the vids 👍👍
I'm using 17g Dr pulley and they are good if you do a lot of 60 mph + cruising I think after running them for 3 months the perfect weight would be 15.5g Dr pulley but 15g or 16g would be great...👍
Thank you Dean for your opinion, I watched really lots of different videos and I have the feeling or better come to the conclusion that the the OEM setup is nearly perfect and only Dr pulleys with 15 or 16 gram could make it a little better ☺️ Thank you for all your testing and sharing your results with us 👌🏻
When i had mine i had the same issue. Then i went with polini and it was miles better. Even after 16k miles on the polini variator there wasnt that much wear.
Hi what weight roller would you use to 60+ commuting most of my riding is duel carriage ways . New to forza’s but the one in there are starting to go a funny shape thanks in advance
My best advice on the Forza 125 is 15.5g Dr Pulley sliders.. Black ones if possible as they are self lubricating. You should get an indicated 80mph on the clocks (72mph GPS) but still good acceleration 👍
Mate honestly I have had major problems with DC Parts they pray on learners not that I am one or that there's anything wrong with being a learner but they are a shocking company they sell really bad parts and honda would back that up 100 percent don't use DC Parts they say they have original honda parts bit they are certainly not
I've found this out..I've been a biker myself for 34years and I had heard they had a bad reputation. I gave them the benefit but I won't use them again.
@@BigBoyzToyz1974 they are not good and I'm glad that you have exposed them on Thier bad parts well done on your videos they are really good and have given very good information on Forza riders thanks for that much appreciated 👍
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
If you want genuine Honda parts, us a Honda dealership. Yes it will cost more but you will get the real deal and your bike history will be 100%!! so if you ever want to sell up the history can be just as if not more important than the bike. Good video, very informative, i think i will keep clear of DC Parts.
Thanks for the comment, I do usually go directly to the dealers with service and genuine parts but as a performance upgrade it's only available via none official outlets but as advertised presumably was an genuine Honda part. They did refund me and I didn't have to send the part back but if you were to have fitted this then didn't check for another 1000 miles it would of been in a terrible state.
Hello bud. Recently commented on the facebook post of mine on forzazowners. John lapworth.
Im like 22 stine ish deab but 6ft 5. On a level grade using a roads stabdard setup i am doing just over 75 standard moh at the max with me ib it. Fast enough though. Its going in for its 8k service on the 3rd as I think I said. New back tyre etc. But the rollers apparantly get looked at when at 8k.
So if I ask them to switch them out will it bring down top end? Sounds like a good investmwnt though. Same top speeds for less fuel
Your vids are brilliant mate, thanks.
I have the Forza 125 2023, what brand of exhaust andVariator rollers would you recommend?
Don't know what you do for a living, if you don't tune scooters you should, people are crying out for your skills, good luck mate and thanks again for the vids 👍👍
Thank you so much fantastic feedback. Rollers go for 15.5g Dr pulley sliders.
so the 18Grams rollers work for you better then the Stock 16Grams ?
what do you think about using 16gram dr pulleys ?
I'm using 17g Dr pulley and they are good if you do a lot of 60 mph + cruising I think after running them for 3 months the perfect weight would be 15.5g Dr pulley but 15g or 16g would be great...👍
Thank you Dean for your opinion, I watched really lots of different videos and I have the feeling or better come to the conclusion that the the OEM setup is nearly perfect and only Dr pulleys with 15 or 16 gram could make it a little better ☺️
Thank you for all your testing and sharing your results with us 👌🏻
When i had mine i had the same issue. Then i went with polini and it was miles better. Even after 16k miles on the polini variator there wasnt that much wear.
They are terrible quality and they know it..
Hi what weight roller would you use to 60+ commuting most of my riding is duel carriage ways . New to forza’s but the one in there are starting to go a funny shape thanks in advance
My best advice on the Forza 125 is 15.5g Dr Pulley sliders.. Black ones if possible as they are self lubricating. You should get an indicated 80mph on the clocks (72mph GPS) but still good acceleration 👍
Wicked thank you for your help
Do u know where I can get them from just had a google and can only find 12g ones
Mate honestly I have had major problems with DC Parts they pray on learners not that I am one or that there's anything wrong with being a learner but they are a shocking company they sell really bad parts and honda would back that up 100 percent don't use DC Parts they say they have original honda parts bit they are certainly not
I've found this out..I've been a biker myself for 34years and I had heard they had a bad reputation. I gave them the benefit but I won't use them again.
@@BigBoyzToyz1974 they are not good and I'm glad that you have exposed them on Thier bad parts well done on your videos they are really good and have given very good information on Forza riders thanks for that much appreciated 👍
11k Revs on a Cold Motor.... Thats Rough Mate.
It's not a 1000cc sports bike mate..