The software you have on your computer looks to be SCAL , that one is compatible with Mac , the software that supposedly is not compatible with Mac is the other program called “vinyl master “
Nice! "Sure Cuts A Lot" is a well known app, I wonder if it's as simple as the app using the Roland generic model choice or if the previous owner had to do some firmware wizardry. I'll have to give it a shot!
I bought a plotter in amazon vevor but I cannot calibrate it for the image cuts I have tried anyway and it is not calibrated short outside the design I am desperate how can I calibrate because it does not have a laser and did not come with the factory parameters noce how much is it X - And because it did not bring the stiker of the parameters I hope you can help me, I have been trying to solve tengp the singmaster program pro vinyl cut it without problems I need to calibrate to make stikers thanks VEVOR KI-720
Hello i have a Mac book Pro Ive looked around and im wondering before i purchase the software will it be work with my mac and being specific will i need anything else besides the software to make sure everything functions properly.
on the softwares website shoud say if its compatible with mac or not... the question is if you can connect us cutter to a mac, u should get a connector for the mac in the box... btw there are multiple softwares that work with us cutters
i just plugged it up to my mac and it works , make sure the us cutter's drivers are updated because it will stop mid cut and screw up your project. like and subscribe to my channel thanks
If anyone is still having trouble getting this to work on a Mac this is how the support team from sure Cuts alot helps me get mine up and running. Install this driver www.wch.cn/downloads/file/178.html reboot. connect the cutter and test connection
Thanks for the link! I had someone help me install the program on the Mac but I made this video to at least show it’s possible since a lot of people said it would run on iOS 👍
@@AbeCaravetta Thanks a lot for this file, I was trying for over 2 weeks now and I could not get it to work, I just installed this driver and finally the computer is communicating with the plotter, thanks again.
i bought a second hand cutter as well but i can't get it onto my mac. may you please make a video or how you got the software on your mac, please and thank you
you didn't explain HOW you got sure cuts a lot pro PC SOFTWARE on your MAC. I use the software and it only seems to run on windows pc. I tried looking for it on Mac before hand and couldn't find anything.
I noticed it seems to work with a lot of vinyl cutters. They have a huge list. Download the demo for free and see if your cutter is compatible before purchasing craftedge.com/download/download.html
I got a Mac and have sure cuts a lot 5 running but when I try to cut something out , it works but it always keeps cutting two lines over my designs. Anyone know a solution to my problem?
Title of the video is exactly what the video is about. Maybe you should search for a video installing the program and keep your negativity to yourself 👍
Please let me know how I could make my vinyl cutter work with my MacBook Pro I would really appreciate it 🙏🏾
please help
Did it work for u bro
Can you make a video how you got the MacBook work with this vinyl cutter??
Yes!! I’m trying to figure out the same because I have a MacBook!
Same here !!!
Easy cut studio will work off a Mac onto the uscutter mh series.
He is using a program that it’s available on Mac ie. supercut
Sure cut that’s it
Can you give me the directions on how to operate Cutter Plotter on my MacOS. Thank you!
I would love some advice as to how to do this
hello how did you manage to install the program on mac. I talked to a provider of that brand and he told me that this plotter was only for windows.
What is the name of the software?
If u have windows chainese art cut
The software you have on your computer looks to be SCAL , that one is compatible with Mac , the software that supposedly is not compatible with Mac is the other program called “vinyl master “
Did i miss you never said what software you are running
I have a vinyl express r series 2 trying to setup on my MacBook Pro any ideas
Can you only use a roll of paper/vinyl what about sheets like A3
I just got a Vinyl cut specialist and I can’t use it on my Mac Pro how yours work?
Make video showing how and what is use I have Mac
Could you please let me know how I use it on Mac
Has Ali no just checked their website doesn’t work with a Mac
@@benzoh28 Dude, he's using it ON a Mac in the video so obviously it does work on a Mac~
😂😂😂😂
i just purchased the USCutter and hoping i can get my mac book pro to work with it
did you get it to work , I've been trying to find something for my US Cutter
You need a program called Sure Cuts A Lot to use on Mac
@@dilsan78 Hey! Did that Software work for you guys?
YOU NEED TO SET YOUR OFFSET SETTINGS ACCORDING TO YOUR BLADE DEGREE. I CAN SEE YOUR CORNERS IS ROUND
What program are u using on ur mac
Nice! "Sure Cuts A Lot" is a well known app, I wonder if it's as simple as the app using the Roland generic model choice or if the previous owner had to do some firmware wizardry. I'll have to give it a shot!
what did you find out?
?
?
Tested it out with Mutoh SC-650 and MacOS 12.6.2. with USB-serial adapter. It works.
Whats the software for the mac pro
Pls do a video on how to use the software on a Mac
This program "sure cuts a lot" works for Mac & pc. Let me know what you would like to see and I'll make a vid 👍
Please make a video
Is there a video of how I can use it with my Mac?
@@davidmuniz9789 It should just work, as long as you're using version 5.
@@pseudotasuki I just got the sign master and it won't let me install the software on my Mac. Would you know how to download it?
como lo isiste o manda el link del programa para descargarla de algun lado salu2s
I bought a plotter in amazon vevor but I cannot calibrate it for the image cuts I have tried anyway and it is not calibrated short outside the design I am desperate how can I calibrate because it does not have a laser and did not come with the factory parameters noce how much is it X - And because it did not bring the stiker of the parameters I hope you can help me, I have been trying to solve tengp the singmaster program pro vinyl cut it without problems I need to calibrate to make stikers thanks VEVOR KI-720
Bro your decals are off! The cutter plotter is not making any corners ! they are round ! is not ok ...
What is the biggest cut you made on that?
Hello i have a Mac book Pro Ive looked around and im wondering before i purchase the software will it be work with my mac and being specific will i need anything else besides the software to make sure everything functions properly.
on the softwares website shoud say if its compatible with mac or not... the question is if you can connect us cutter to a mac, u should get a connector for the mac in the box... btw there are multiple softwares that work with us cutters
i just plugged it up to my mac and it works , make sure the us cutter's drivers are updated because it will stop mid cut and screw up your project. like and subscribe to my channel thanks
How to connect it to Mac?
can you put me on to the person who you bought the plotter from. Getting some issues with cutting on my mac. it would mean much
Can someone please show how to setup a mac to run vinyl cutters?
If anyone is still having trouble getting this to work on a Mac this is how the support team from sure Cuts alot helps me get mine up and running.
Install this driver
www.wch.cn/downloads/file/178.html
reboot.
connect the cutter and test connection
Thanks for the link! I had someone help me install the program on the Mac but I made this video to at least show it’s possible since a lot of people said it would run on iOS 👍
@@AbeCaravetta Thanks a lot for this file, I was trying for over 2 weeks now and I could not get it to work, I just installed this driver and finally the computer is communicating with the plotter, thanks again.
@@rbharratt5101 Your welcome. Glad it worked for you too
@@AbeCaravetta do you have another link ? that one isn't working and i need !!! pls
Plh how can I download singmaster and install on macbook
i bought a second hand cutter as well but i can't get it onto my mac. may you please make a video or how you got the software on your mac, please and thank you
did you get it to work?
@@miguelangelgonzalezcanas7177 yes i have, thank you
@@itsmervin2645 how does it work I have the same issues
@@itsmervin2645 Hey! What software did you use and how id you get it to work? I have a 2011 MacBook pro, is it compatible?
@@itsmervin2645 can you let us know how you got your cutter to work with mac please.
Yeah I want to know
How to get to use with Mac. I can't figure it out 😞
Nice job! It's a lil bit of a learning curve, bit it comes quick.
how did u get it working on a mac
Can some do a video on how to fix the belt it come and won't cut right!!!?
Thanks bro
i would like to know how to use it with the mac
you didn't explain HOW you got sure cuts a lot pro PC SOFTWARE on your MAC. I use the software and it only seems to run on windows pc. I tried looking for it on Mac before hand and couldn't find anything.
Uscutters has a SureCuts A Lot for Mac now.
Check their site.
I havent used it but its there.
that works with corel draw 2019?
will this software on Mac work with any vinyl cutter or it have to be this brand cutter?
I noticed it seems to work with a lot of vinyl cutters. They have a huge list. Download the demo for free and see if your cutter is compatible before purchasing
craftedge.com/download/download.html
How did you get it to work with your Mac?
We all wondering why not relay that info to us lol
How to set up to use a Apple Computer
I got a Mac and have sure cuts a lot 5 running but when I try to cut something out , it works but it always keeps cutting two lines over my designs. Anyone know a solution to my problem?
u have to get the full version of the software
If you didn't purchase the program, it cuts lines as their watermark until you purchase a license
Thanks !!
@@yazzieyaz740 I have the same program but I need to download the drivers. Do you know where I can get them?
need more here. Its not all about the Highlighter Honda. Just saying.
lol im doing my best James! What vids would you like to see?
Is the software free with the purchase of the cutter
I do believe it comes with some software but most say it won’t work on mac
Carlos Soria checking in
How to use on macbook
What program for mac?
This program is called "sure cuts a lot" 👍
@@GarageGoals are you able to use any other programs to cut, or will it only work with sure cuts a lot?
Still can't get over how you pronounce decal :D
LMAO. Well how do you pronounce the names Dee vs Dennis? The way you say decal you are adding an invincible 'e' 😂
@@GarageGoals haha, touche! Regional differences I suppose, rock on man!
haha yeah its all good fun! Don't get me started on Radiator 🤣
Thats what that was? 🤣🤣🤣
how does it work with a mac
need to know asap
I've only been able to get it to work using Sure Cuts A Lot 5. I think you can use it with other software by using a FTDI serial adapter.
3:10 iOS and macOS are not the same thing.
Weaving not weeding
na, he may pronounce decal weird, but it is called weeding.
Stop telling people to comment and not reply. Lame lame lame lame. You basically showing a misguided video.
Title of the video is exactly what the video is about. Maybe you should search for a video installing the program and keep your negativity to yourself 👍
@@GarageGoalsplease show us how to install sign master on the MacBook Air 💻
Hey, if you check out the RUclipsr ‘Wood Love Signs’ she has a transfer paper that she recommended. It might help!