2007-2015 CR-V A/C compressor replacement
HTML-код
- Опубликовано: 21 окт 2024
- How to replace fix a compressor and clutch assembly, and recharge the air conditioning system on a CRV. It is the same part for all these years. 2008 2009 2010 2011 2012 2013 2014 2015. 07 08 09 10 11 12 13 14 15.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
Yo!! I appreciate the super clear directions and great camera angles. I've never even changed oil on a car, but you made this really easy to learn and it was easy to replicate. Saved me about 900 bucks man, thanks again!
Welcome!
How did you change this without a hoist ?
Just bought a 2012 Honda CR-V (127k miles) for my college-aged daughter in Texas. The AC is sluggish and blows rather slowly. I think it may need a new compressor. I am not the guy to do it, but I wish I had the skill set you have! As a former teacher and principal, I can tell you that you are a good teacher! Your explanation and sequencing of steps was terrific--much appreciated!
It's probably not a compressor issue. You would need to check the system pressures.
The best/most discriptive AC compresssor change video for this model car (which has notoriously bad compressor's) Thank you!
I like how direct is the video, no time wasting unnecessary talk. Thanks!
Thanks for your video! I replaced my compressor over the weekend!!! Thank you!
I've watched a bunch of videos on this and this one is by far the best one. Thanks
Thank you for the very good demonstration on how to get the compressor out and back in
Welcome!
Thank you for the video. It seems very simple compared to other compressors I’ve replaced. Will try this tomorrow!
Always a good day, when you search for something and your video is the first one to pop up! Score! Thank you
😁
So thankful you showed the Harbor Freight pump. I appreciate your video!
Very informative video! Helped save me a lot of money by not going to the shop. Only problem I ran into was trying to get enough slack in serpentine to get it back on.
Nice video - thanks for taking the time to make this, it was really helpful!
Great tips and tricks as well!
It is a great to share your performance. I appreciate very much to know.
Great Instructional Video !! 🤗
Great video! Extremely helpful and succinct. Thank you!
I have replaced a clutch on one of these compressors while it is still in the car. His suggestion that replacing the clutch is a total pain is very accurate. Removing and installing the clutch snap rings is extremely difficult, even with the compressor unbolted and positioned for best access. Replacing the whole compressor is the way to go unless you have a lot more time than money. The description in this video for how to remove and install the compressor and how to best access the serpentine belt tensioner matches my experience as being the best way to get the job done.
Dale Gregan did u have to change anything else along with the clutch?
Thank you. Nice, direct and clear.
I doubt the accumulator is welded. It looks that way, but my civic did too and it wasn’t. It pushes into that welded block and is held on by a clamp.
Thanks for mentioning only the actual size of the bolts not showing every size you may have tried and didn’t fit. Very helpful when that is all edited away.
Question: so I see that the clutch is working(belt is spinning) but when I tested the pressure it had nothing at all. And all I get is hot air when ac is on. You think it is the compressor?
Does it matter which side you put the oil in the compressor? High or low?
I do low. It doesnt really matter.
Man I got nervous.. thought I saw a cracked support in there. Turns out my phone is cracked 😂
Hi. I have a honda Hrv is the same way to replace like crv?? Thanks so much 🙏
I don't know.
Do you think the compressor is bad if the AC sometimes works now most of the time not? I added refrigerant and it was still in the green pressure and worked for a few more days then stopped. I went to add more refrigerant and it was in the red pressure zone so I didn't add any. Hope that all makes sense.
You are looking at the low side pressures, with the cheesy little gauge. It's probably in "red", because the compressor is not working.
The desiccant bag really should be changed. That is where all the trash accumulated in mine. I changed it from the bottom, no need to remove the condenser as seen in many videos. I have pictures if you are interested.
Great vid I have friend needs 2014 and may do it for him. Usually they already have oil in I thought?? Did a Honda passport/ Rodeo and they had the oil prefilled even came with a plastic cap over the whole so it wouldn’t spill in shipping.
Yes. I like to drain it out, unless there is a tag or something that tells you what oil it is. Could be pag 46, 100, Ester oil, or who knows?
Great video.
Thanks
Those clips on the lower splash are always a pain especially on older vehicles, they are cheap so I usually just cut them off with a side cutter and replace them
Can you do a video on how to evacuate the system ?
You should use a vacuum pump. I have later video's on such a thing for I finally have one. I believe you can rent one.
I didn't know quick lube places evacuate freon, for free no less. Good to know.
At times my fan motor looses speed when set to “high” and will recover if it turn it off and on. What could be the culprit?
I dont know.
Quick question I have 2008 crv it' shows code 138 for master cylinder pressure sensor, any advice how to fix this issue?? Thank you
Probably check it with a continuity tester with no pressure, and pressure applied?
dudes awesome!! crystal clear directions
Great video, thanks!
changed and still hot air?
Is that a question?
Thanks for the tip - short and skip the BS. Looks like it's working great - so no problems. Just for future reference FYI, I usually only add the refrigerant as a gas, it looks upside down as you add it as a liquid, if this is done with it running its possible it could screw up your new compressor (a liquid doesn't compress so it doesn't like trying, sounds like "pinging"), I usually just wait and add it all as a gas with it running, compressor kicks in after an ounce or 2 then it goes slow but time to get it just right...
nice video man thanks
Straight shooter..nice..thanks
Loved your sign off, ok bye
"okay bye"
perfect
Enjoyed!!
Love your video however, your manifold gauge hoses are applied backwards.
YoUR'e bACkWarDS!
Thank you.
You're welcome.
what is the part number for compressor
I don't know
Nice vid bro
So 35 on the low side is good?
As a guess it's about right. Better to weigh it, and look at the hot side too.
@@RustBeltAuto yeah, Ive always tried.to weigh it. Although after mine wasn't cooling right I added more and brought it up to about 50psi. Now the engine bogs when the ac kicks in.
@@atxjax1 too much is bad.
What do you charge for this job??
Everything is free.
@@RustBeltAuto But if you were a shop and did this, how much would you charge? My girlfriends 07 crv needs a compressor and what the shop is wanting to charge seems crazy.
@@JamesC00 I try not to play with numbers, and make video's to help others.
Are brother with arnold swazinager?
I actually have a neck.
@@RustBeltAuto you sound like him lol. how long this new compressor last on this 3rd gen crv? how much do they cost?
@@jomariquizon7886 don't do time/money questions.
Going to pick up used 08 crv for a decent price for today's world I guess Ac doesn't work. What should I check to make sure it's not the black death. He said bearing was making noise. That makes me nervous
What is the black death?
@@RustBeltAutoit's common on these and earlier year models. Compressor self destructs internally and send metal shrapnel through the entire system. Most of system has to be replaced and flushed.
R134 is supposed to be ozone safe. That's the reason you don't need a license to buy it. The old R12 is not ozone safe and cost a fortune, if you can still find it. And you need a license to buy it.
All of it is heavier than air. It actually bleeds down into the soil. How is it going to get up there in the first place? Most people that know what is going on, believes it is all just a DuPont scheme to hold patent rights.
@@RustBeltAuto A little known fact is that every time you flip a light switch on, you create ozone.
@@jumpercable20 how? Extrapolate please.
This looks deceptively easy i know I'm gonna fuck it up lol
👍
Okay BYE!