2007 - 2011 Honda CR-V A/C Clutch Replacement
HTML-код
- Опубликовано: 4 авг 2024
- Have no cold air? Than replacing the A/C clutch and coil may fix your problem. This repair will save you the cost of replacing the whole compressor unit which is over $800. Honda CR-Vs have a known problem with the A/C clutch for which Honda issued a service bulletin (12-072).
Estimated Cost: $400-500
Estimated Time: Half Day (~5 hrs)
Service Bulletin 12-072
f01.justanswer.com/clmcr8/971...
01:04 Part 1: The Tools
03:45 Part 2: Diagnose the Problem
06:32 Part 3: Clutch Access
08:02 Part 4: Clutch Removal
10:02 Part 5: Reassemble
Specialty Tools Used
Serpentine Belt Tool by Performance Tool W84010
www.amazon.com/Performance-To...
Channel Lock Pliers #927
www.amazon.com/Channellock-92...
Craftsman 2-Arm Gear Puller 9-46905
www.amazon.com/Craftsman-9-46...
Optional Snap Ring Pliers to Replace Coil
Mac Tools TPQ34
www.mactools.com/en-us/Pliers...
Clear and concise. Very helpful especially about what tools is needed to make the job easier. Thank you for posting
Excellent video. Very well edited. If only most self help car repair videos were this good.
Tom, this is really great. Every word was useful and the video clips themselves were as informative as possible without a crazy budget.
I can see you’re doing this out of the kindness of your heart and genuinely want to help walk a few people through this, and it is very appreciated.
Thanks!
Thank you so much for your comment!
Very nice job on video on the explanation of tools used at the beginning.
Superb video, excellent narration, great camerawork and very helpful tips for tools needed. Also, very good troubleshooting tips regarding the relay.
Thanks for this video. I’ve been trying to get up the courage to do mine and this helps a lot
One thing to add is to check the gap between clutch and pulley.. As per the TSB... Thanks for sharing... Nicely done !
That’s a great point! I forgot about it when working on the project.
Outstanding. Thank you
Good video. If you have a 2006 (like I do), eliminate 50% of the room this guy had to work with. Also, practice throwing your wrenches.
Same problem and solution on Civics and Fits. The ac clutch is a high wear item, and exposed to the elements. Shops seem to want to replace the entire compressor when the clutch alone would do the job. My Civic is on its third AC clutch. The coil failed on the first one and the clutch plate's rubber bushings failed on the second causing it to get noisy. I got five years and 100k km out of the first aftermarket replacement clutch. The compressor itself is fine, and has a much longer life. P.s. a long nose set of Knipex snap ring pliers will get the coil. Cheap snap ring pliers are a frustration. Knipex are worth it.
Exelente video exelente explicación exelente trabajo muy útil GRACIAS. Saludos
Great video, thank you!!!
Very instructive and well made video! But where you hold the relay up and say the silver terminals are the “relay part” & the copper ones are the “power part”. Actually the silver blades energize the relay and the copper blades RELAY 12 volts to the clutch coil.
How many miles did you have? Wonder if replacing compressor if high mileage to prevent what they call black death is better.
Probably great info but could not hear a word. Is there a way to increase the volume for your videos?
There is no way to bypass the clutch on a 2010 ?
Well done sir! About to tackle this project myself but, I think I might do the coil as well. Any thoughts you might have in hindsight?
If you're going to change the coil, I'd DEFINITELY purchase the snap ring plyers that were recommended by a Honda mechanic (the Mac Tools TPQ34 link in the description). The coil snap ring is way down in there! Although it wasn't mentioned, I also replaced the coil but I had to grind the heck out of my snap ring plyers until the nose would fit. Other than that, with the right tools, it's not too bad.
I used a pair of Power Fist pliers from Princess Auto.
@@gordhammond7105do you mind if I ask which ones?
Any chance you know what the air gap is supposed to be set to?
I was rereading Honda Service Bulletin 12-072 and it says that the “proper clearance should be between 0.014-0.026in (0.35-0.65mm)”. Hope that helps. Look on line for the bulletin it’s very helpful.
400$ and 5 hours. I paid 52$ for the whole clutch assy. and it took me 1.5 hours on jack stands. What was 400$? and why 5 hours?
What sizes are the snap rings?
Unfortunately I don’t know. The snap rings came with the compressor clutch as part of the repair kit.
Check the thermal switch on the compressor before doing all this ! Common problem for the clutch not engaging
Interesting! A/C on my CR-V works for a little bit, like the first cycle, and then that's it until the car cools down...
I will investigate this thermal switch you speak of.
My 2011 air works great for about 45 minutes on hot day then quits. Clutch disengages. I've charged it. Replaced cabin filter. Replaced relay. Replaced temp. Limiter on compressor. Can't find a video where someone has had this problem and actually got it fixed
Check the thermal switch
Any update for your solution. I have to fix mine but I have no cold at all.
Transmission replacement civicturbo
What's the world coming to when a mechanic must give full disclosure that he used lubrication on a nut?
Link for clutch ?
Hi, Here are the part numbers.
AC compressor Clutch 38900-RZA-014
AC compressor Coil 38924-RWC-A01
I typically purchase parts from www.hondapartsdeals.com/. The price is usually cheaper than buying it at my local dealer even with shipping. Here are the links for the specific parts:
Clutch - www.hondapartsdeals.com/product_info.php?products_id=610333973
Coil: www.hondapartsdeals.com/product_info.php?products_id=610090361
@@fixittom thanks I alreciate
www.rockauto.com/en/catalog/honda,2007,cr-v,2.4l+l4,1434521,heat+&+air+conditioning,a/c+compressor+clutch+assembly,6572