Can I Install This Power Bank Battery Into An iPhone?? 10,000 mAh
HTML-код
- Опубликовано: 21 июл 2022
- iPhone batteries are small, naturally because they're made to be as compact as possible. But not everyone needs their phone to be so compact. Some people, myself included, would prefer better battery life. In this video we're going to see if we can install a 10,000 mAh battery into this iPhone. That would drastically improve the native 2900 mAh battery and allow me to use this phone for days at a time. Let's see if we can pull this of...
Thank you for watching!
Buy My BLUE Mat :a.co/d/h3iPG3i
Website( Mail-ins & Contact) : www.phonerepairguru.com/
Second Channel: / @prgrepairtutorials2526
Ask a Question (Join the Subreddit): / phonerepairt. .
PROMO INQUIRIES: sean@prettygoodagents.com
Social:
Check us out on Instagram / phone.repairguru
Or on TikTok www.tiktok.com/@phonerepairgu...
Twitter: therealprg?lang=en
Facebook: / phonerepairguruu
My Repair Tools:
MAGSAFE MAGNETS : geni.us/BgyY
Tools and Organizer( iPhone Screen Stand/ iPad Screen Stand - Microsoldering tools etc) www.wrepair.com (Discount Code PRG5 for 5% Off Entire Store/ Discount Code PRG10 for 10% off $500+ orders)
Qianli Screw Driver Holder: geni.us/QIANLIICUBE
Qianli Screw Drivers : geni.us/QIANLISCREWDRIVER
Display / Battery Programmer: geni.us/jCfJoB
Tools Used (IFIXIT) : geni.us/JBYJF
Qianli Clamps: geni.us/QianliClamps
My Blue Mat: a.co/d/h3iPG3i
Ifixit Starter Kit: geni.us/STARTERKIT
Heat Gun: geni.us/HEATGUN
Electronic Screw DriverP: geni.us/WOWSTICK
Filming Gear:
LUMIX G85 geni.us/G85CAMERA
Lumix GH5 geni.us/PANASONICLUMIXGH5
Rode Wireless Go Mic geni.us/RHODEWIRELESSGO
Rode VideoMicro geni.us/RHODEMIC
Studio Lights geni.us/STUDIOLIGHTS
Spinning Thing geni.us/ROTATINGDISPLAYSTAND
Guru Approved:
Easy Button geni.us/EASYBUTTON
Gameboy Case geni.us/GAMEBOYCASE
MagSafe Cooler geni.us/jCfJoB
Nutella AirPod Case geni.us/PhUZC
Giant AirPod geni.us/GIANTAIRPOD
Nano Leaf Lights geni.us/xuKg
Anker MagSafe Charging Stand geni.us/ANKER
Framed / Disassembled iPhones Display xreart.com/?ref=l0076ztwht
Phone Repair Guru assumes no liability for any damage caused to your phone as a result of any of the information contained in this video.
Do not attempt unless you are open to the possibility of further damaging your device. 
Наука
Power banks are lying to you video : ruclips.net/video/xR-EizT7Am0/видео.html&ab_channel=PhoneRepairGuru
Last gold housing mod : ruclips.net/video/HAjzF3DB6qQ/видео.html&ab_channel=PhoneRepairGuru
My BLUE Mat :a.co/d/h3iPG3i
Early
Hello
Hi
hi
Hi
The reason it did not work the first time was that the 2 LiPo batteries together in series gives roughly 7.4 volts which is way above what the iPhone 7 needs which is 3.7. The abnormality is what could have caused the boot loop since it didn’t know what to do with all the power at once. In fact you’re lucky you didn’t fry anything
These batteries must be in parallel and not in series. I'm not sure if the phone can handle more than 6 volts on the battery traces. Most smaller chips are limited at 5.5 volts at the absolute maximum ratings
@@hristomirchev4026 good point.
@@hristomirchev4026 I'm surprised that the BMS survived that voltage without actually starting to discharge the batteries.
@@hristomirchev4026 also the actual voltages used are as small as 0.6v
That's what I wanted to say
Don't think the people at Apple would like this and I'm not even sure why they wouldn't. I just know they would not approve in the least. If you took this step any further they would get their people to cripple this workaround with a firmware update. Guaranteed.
who cares what apple thinks, they didn't give a shit to their customers since forever.
its using a real bms board i dont think they can patch it out i dont think apple will care they dont care about hackintoshes and thats a way larger number of people than who would ever do this
@NoisyGamer ur mum wears socks to bed don’t tell me to mind my own buisness
They wouldnt approve cuz they want u to waste ur money and buy a mew phone but just with a different design
yeah because they would release a new update just because one guy soldered a battery which has to much voltage to his iphone.
Now I really wanna try making a giant battery, a 3d printed thick af iphone housing, and some really long screen ribbon cables and make the thickest iphone ever
Make it durable like the 3GS
Yeee def do a 3d printed case for it
@@dirrology I don't have a 3d printer but I think thats a minor issue I got this
@@ceticx pcbway has 3d printing services and they offer materials that aren’t plastic
I would buy it!
We want a battery drain test once you get the phone assembled the way you want !! 😄
Genius! Thanks for pushing the boundaries for our entertainment 😀
🙏
Yoooo i love ur channel
@@jackforlife101 😀💚
@@jackforlife101 😮😮
@@PhoneRepairGuru I love your channel you are so cool
This video quality is perfectly good bro, keep up the great content!!!
Don’t worry, we love your videos no matter what. This, this kept me watching for the full six minutes. I didn’t even think of leaving lol
I skipped because too much talking
It's great to see you making longer videos again. Welcome back!
how long does it take for your longest repair ever
Good question
@@Midblur09 it may be the airpods video but i’m not super sure
@xRhythm - ikr
20 feet
3 hours I think
I’m happy to see a vid from you. I’m excited to see this go further. As always, good work. ♥️
Really miss long videos and I’m glad that you feels better now 🙌🏻
Question: Where do you buy the screens that you use in repairs?
Mobilesentrix they only sell to people who have phone business and valid tax id
@@congthanhtran1894 ok thanks
Local electronics shop maybe? Idk, maybe online.
IFixit
Ifixit
Everyone: yo that insane!😁
Apple: this is a game changer right there
This is one of the coolest videos about iPhones I have watched.
Great vid👍 Question:what’s the worst repair tool you have
I’m not much of a tech guy, so why do I find these so satisfying?
Who also here has a cheap phone and has a 6000 mAh battery
Mine has like 3300
Mine was 5000
Mine has 0.1 :)
5350 i got
Moto g54
The quality is good for me I’m just happy that you keep posting 😊
So brilliant! Thank you for figuring this out - ohhhh the possibilities!! 😆
Hey. Life has got all those twists and turns. You’ve got to hold on tight and off you go. You will get through this.🤞🏽💯
@@jimmyfiredragon8582 its a bot
@@Robbie_Roy Oh flip okay thanks. I'll delete the comment.
RUclips asked me to rate ur comment lol
This was insane!
I love this kind of technology videos ❤️
Phone repair Guru is the master of fixing phones!
Modding too
uh, no.
Keep the hard work 💪 your videos are the best
This is exactly the content i signed up for !!!!!
Need more of such stuff
Dude I absolutely love your videos! This was actually pretty freaking cool!
All Batteries that are made up of Li-ion technology have the same characteristics when considering the voltage. i.e 3.8v = 50%, 4.2v = 100% above 4.2 = explosion and below 2.9 = dead etc. so, you can swap anything with anything. Always make sure that the BMS board is compatible. that's all it need.
Just a thought… at the end you said you might drill a hole in the back for the battery. But a cleaner look would be to 3d print an edge piece that the screen and the back can snap to. Make the edge thick enough and the new battery looks like it could fit inside the phone.
You’d end up with a chunky iPhone but 10ah would be worth the extra thickness.
My thoughts exactly
Hello again I am excited to see u again. Ur videos are amazing and cool. Thank you!
I really want to attach the phone to power bank, keep doing we love your content)
So you could 3d print a case and use a MASSIVE battery? I’d love to buy such a case. Perfect for hiking.
I mean this is cool, but there already are iphone cases that do this.
Best thing would be to 3D print a back that can accommodate the battery.
Your videos are amazing you inspire me
Finally i found this kind of video. I will try this on my older phones
The better version of the energizer phone 😂
I did this to my old androids Sgs2, sgn4, a70 and a few tablets as they are making timelapse videos and should survive poweroutages while running hard. The sgn4 i modded because i was using it hard and used 3 metal-cased lipos on the back with cosmetic and somewhat protective plasticcasing. Used it ss a daily driver for 3 yesrs in that condition adding 3 years of life to the device as the batteries was getting hard to get by bc of the devices age. Used it for a total of 6,5 years.
Are there any risk that we exclude a power bank controller from the electrical circuit?
I thought to do the same thing with my old Samsung but to solder it to a power bank output instead of direct connection to a phone bms board
Would you mind doing a tutorial? I wanna do it on my old phones too
This video helped me very much because if my phone battery dies I will definitely do this.
I Am Addicted To Your Videos!
This looked like an awesome experiment, personally I wish phone manufacturers would forget trying to make the thinnest device possible, and instead just offer the best performance and battery life possible. A phone with 10,000mAh battery would be insane (plus it would then have the thickness to offer headphone jack, expandable storage, and basically every other feature that was useful, but has since departed us).
yeah i like thick phones alot
You should use ulefone or oukitel smartphone..
@@muhdaimanharith if only they offered quality near other manufacturers
Check out the Unihertz Tank. It has a 22,000 mAh battery
Hey PhoneRepairGuru, i was just wondering from where do you buy all the replacement stuff and screens?
He gets it from mobilesentrix, but their generally more business oriented, for person I would use injured gadgets, or ebay if you feel like searching for oem and stuff
This is super crazy, waiting for part 2.
Love content bro its helped me repair my iPhone its like a Tutorial
Hey phone repair guru , can you run a accubattery test to see wheather the iPhone is determining that the attached battery is of 10000mah
Now we want part 2 with 3D printed housing to make it actually a working iPhone ❤️❤️
Keep it up 👏🏻👏🏻
I like the way he constantly repeats so...so...so...
I'm like waiting for it 😁
we'd love a tour of your workshop/setup! :)
Loved this one 🤩
I wish I could do something similar with a cheap android phone too ( I run python codes on them in loop for days).
You’d still need to keep them connected
@@John-zp2jm But I can move around different cities, without worrying about charger, power bank…
I will be the happiest person to get a 20000 mAH power bank running android 12🫥
@@sudoAnalytics lmao it’s still a lithium battery at the end of the day, it would only last 1 day
What’s poppin ☺️
Pop corn, y..?
Bro I remember back when you had 10k I like your videos :)
I always watch your videos! Keep it up! From PH
I'm just going to 3d print a case that can hold both my phone, and a power bank.
smart😂only if he thought of this and he wouldn't be wasting so much time on connecting the phone to the battery
But then you are charging the powerbank, which then charges the phone... but other than that, it works.
Battery life will show up as 1000% capacity 😂
bro keep makin videos man your an amazing youtube
Yeah I can’t wait to see you do that man
I strongly recommend getting longer wires than drilling the iPhone body 😁
Fun experiment.
I'm just wondering if overcharging (well maybe not overcharging, but more a charge problem ;-) is an issue here, since the capacity of the new battery is much larger.
This is awesome, can't wait to see a follow up
Bro im wating for pt2 keep it up🤙
I just had this idea where the iPhone using (external) batteries instead of having internal batteries. It would've decreases the amount of heat when you're playing games and not to forget the weight too. Just wondering whether long cables/connector affect the power delivery to the logic board.
@@androidmaster3369 batteries dont explode when they touch dust
At that point why don’t you just get an Asus gaming phone if gaming is one of your top priorities?
First of all, I love your Videos. This is a funny idea but it seems like you have missed something very important. The Battery from the Powerbank has a nominal voltage of 3.7V and a voltage of 4.2V when fully charged. The Iphones Battery however has a slightly higher Voltage of 3.8V and around 4.4V when fully charged. That means if you charge up the Battery with the Iphones BMS you will overcharge it and it could be a fire hazard. Even though both are Lithium Ion-Polymer Batteries they have different voltages per cell.I have encountered this voltage problem myself as I did the Same you did with a Galaxy s7.
what if we using phone battery with the same spec but higher capacity?
@@surapurna thats possible but sadly there are many sellers who rebrand normal or even used batteries as higher capacity. It is possible to make a fitting cell with a slightly higher capacity but you still have the physics of a battery that limits its capacity. Else we would have much bigger capacity batteries in our phones:)
@@cinematica9073 like a tablet battery for example. Or just stack double triple the same exact battery in series
@@surapurna Yes but you need to connect them in Parallel and not in series. If you connect them in series the voltages are getting added up
If you want to increase the capacity you have to connect the cells in parallel.
that is really impressive. nice one!!
I’m gonna try this 👍🏾👍🏾👍🏾 Good one bro
plays rtx on
This is extremely dangerous as the iPhone charges its batteries to 4,35V whereas standard Power bank and regular liion batterys only charge to 4.2V.
By connecting the wrong bms you basically left the battery at the iPhones mercy. It will probably attempt to overcharge it and could destroy the cells, resulting in a blown Battery and a fire hazard.
If you attempt this, watch the cell chemistry and rated voltage before soldering a foreign bms to it.
like uploads like these when you actually get inspiration foran idea instead of burning out cranking continuiously
You are dope bro! Damn , thank you so much, subbed
First
You're a genius, bro!
I love all your videos so much
Do it YOU HAVE TO BRO u got me excited AND GLAD U BACK I HOPE FOR MORE VIDEOS PLEASE
Nice one Cant wait for the results
That's why I love your videos
Can't wait to see what are you going to do next 😆😆
pretty cool idea! thanks!
Love what u do broo👏👏👏question though have u ever fixed a tecno camon x before
Good to have you back man.
Your quality is great 1080p60 is amazing also great videos!
Great video!
I love tech so much and I want to meet this person some day.. In Sha Allah
@Peter Knetter should make a fancy schmancy cardboard housing to keep that bad boy together in style
I did it with 4 18650 batteries on the Samsung S4, cool video BTW.👌
I was just thinking about if this was possible. It’s my lucky day.
I love what you’re doing
Niiceee
Now it'll last a full day's of usage like a normal phone!
I wonder how far you can go in terms of housing and "hardware hacks"... btw you're my favorite RUclipsr love your content 😎
Yes!! This is the video that we needed!!! 😎😎😎😎😎😎😎😎😎😎😎😎😎
This is awesome!
LOVED IT
Favourite RUclipsr 🇿🇦🚀🔥🔥
You are doing what I want to do with my iphone! because you may game on this phone whole day
Hahaha pure gold. Love this kind of crazy ideas. If you can keep on going.
The camera quality is perfect
I've been doing this from my past android phones just to have a long lasting battery and it really works.
Interesting, I will like and been subscribed :)
Welcome back! :)
Crazy vid btw these are so interesting
I have that exact same helping hands thing!!
The quality is very good
Dude, that is great😀