I will be installing the LED trim on these and I will be making a video on it so be sure to subscribe! Timestamps below 👇 How to prepare the recessed lights 01:27 How to wire the recess light (demonstration) 03:04 How to correctly space recessed lights 08:21 How to wire the recess light in the ceiling 13:46 How to properly staple recess light wires 14:37 Final walkthrough of the can light install 14:50
This was some great information. I am a new homeowner and want to make some changes but electrical, gas and plumbing gives me hives...LOL. This video has given a boost of confidence. Thank you for the good content.
Thank you for this video. Much clearer than the others I watched. With your explanation of the connectors, I was able to find a loose wire (not fully inserted) that was cutting power to the last three lights on a circuit.
Thank you very much to show the way to install it I didn’t know how and thanks to you I’m going to make it when make a project in my kitchen, excellent video, I will follow your videos to learn more from you
FYI you do not need connectors for these cans. You can put your wires in the black slots attached at the ends of the box. You simply open the top/cap and place the wire in the slot. This will save both time and money as you will not have buy and install the connectors.
This comment means a lot to me. I’m so thankful to have subscribers like you leave a comment like this. Thanks a lot for watching and good luck on your projects!
only thing about the can-less ones is you can’t change out the bulb…i’m a Philips Hue guy so the canned version would be my choice as i don’t like to have a lot of different platforms and apps to toggle between…other than that, the can-less ones are quick and easy to install…excellent content btw!
Another great video! I prefer having the kitchen sink light on a separate switch so you don't have to turn on all the kitchen lights just to rinse something off.
Can you install the new construction mounts in an old house? I only have those and I was wondering if they can be installed on top of the drywall through the attic
I recently installed the very thin, less than an inch, LED recessed lights. Much easier to install than cans. Easy to change color of light. I'll never install the big cans again.
I like to use the cans because I use blown in insulation for the attic. With those slim one,if you ever want to change them out insulation would fall down through the hole. With a can installed ,you can switch the trims out without worrying about that. Hope that help!
great vid. Question. I have 4 Halo lights right now and purchased a 6 box set to add more. can I add all 6 for a total of 10 or is there a limit per light switch? Thanks
Most the time you can get the wores back putnof the pop in connectors inside the cans you take the connector and pinch it and wiggle it back and forth while pulling and most the times they will come back out. Trust me i learned the hard way lol
great Video. Shouldn't you use the angled recessed light depends on the slope so the light shot straight down? or this looks better? Also how to install these recessed light if the room is already finished? are there different types I can use instead in this case? thanks
If you have cans (recessed) lights in your room and if you have attic space, then you can add another can by doing a remodel can and adding the 14 gauge wire to an existing junction box from a light and yeah. Rest is self explanatory
Lol I figured you didn’t get to that part yet. I would imagine those are OK to use in my area. I can’t figure out a reason not to. I will ask the inspector to find out. Thanks for checking out my video!
You explain everything very well, i've been watching a lot of your videos. I'm doing some of the work and hiring a contractor for the rest, mainly electrical. I was thinking of doing the new clip in flat LEDs because they come with selectable light value but the contractor is saying to use new construction cans. I keep reading that these new construction cans leak a lot of air, do the ones you used address that? are they newer design or construction?
I wanna install new pot lights and I have a fairly good experience doing so in a new build, however, I am now trying to upgrade an existing room and not sure what would be the best way to run the wires. The room has two light fixtures in the ceiling obviously with own junction box for each. Each light fixture is controlled by a separate switch in that room while one of them is also controlled by another switch neat the stairs. I am also installing a dimmer switch with the pot lights. What's the best way to do it? Shall I connect all pot lights to the junction box controlled by the 3-way switch and completely cancel the other light switch/junction box in the room or split the pot lights in half, one half connected to one junction box and the other half to the other? Would that be weird or unprofessional to have to light up half of that room with one switch and the other half with another? Are pot lights supposed to light up all together in a given room or is it ok to split them between two switches. Moreover, if I did that then the dimmer switch can only control half of the lights and not all. Shall I install another dimmer switch for the other half of the pot lights and have each half function independently? I feel like it's gonna be unprofessional and maybe also annoying while trying to match the dim level on each switch. What do home renovators do in this case, do they cancel one light switch and it's junction box and just connect all pot lights to the existing 3-way switch and install the dimmer switch there? Thank you so much in advance.
Yes that finished ceiling is now complete. Halo sells trim kits that fit right into the housing. They work great on slope ceilings or flat ceilings. Hope that helps!
Hello I live in a old apartment in nyc and the switches is set up using the end of run single pole switch, can I use this method to install 6 recessed light
@@TheExcellentLaborer thank you! I’ll search for them, do they just thread in like regular bulbs but with a cord coming off it? I didn’t seem them in the store.
I prefer pot lights because if I have to replace the recessed light trim I don’t have to worry about the blown in insulation coming down through the hole. So for a new construction job I will always use these pot lights. Thanks for the comment!
I am curious to know what downlight that was selected for this installation. I saw this in a Wirecutter article: High CRI and R9 values: CRI (Color Rendering Index) measures color accuracy relative to incandescent bulbs, or natural daylight. Although LEDs still can’t match incandescent bulbs, which have a CRI of 100, they’ve improved significantly in recent years. A CRI of 80 is now standard for LED bulbs. Higher is better, and great LED bulbs should accurately render colors. Lighting designer Geoff Goral told us that CRI as a metric has come under fire for measuring bulbs based on how well they portray pastel colors (instead of more saturated colors). Some bulbs now also list an R9 value, which indicates how well a bulb depicts red tones (making art, food, and people look better and less washed-out).
Pre strip your romex before you put it into your can, leave a slight service loop for adjustment reasons, 15 amp circuit for the love of god and make all your electrical work look like a work of art. Craftsmanship is key. I don’t like crooked runs of romex. Speed and efficiency. Find a balance
Does anyone else find the traditional advice of "ceiling height ÷ 2" for spacing to be incredible overkill? I've done a couple of rooms with recessed lights, and this advice would've required an insane number of lights and would've looked kinda insane. I've found anywhere between 75%-90% of ceiling height for spacing is as bright as I could ever want, and feels like much more normal spacing. Then, whatever spacing I used between lights, I do about half that between light and wall.
I do blown in insulation. When I have to switch out wait for lights insulation wants to fall down. So I just stick with the pot lights. Hope that helps!
I just like the idea of if I want to change out to a different trim I don’t have to worry about blown in insulation coming down on me. Good question though!
Yes that is possible. I wasn’t sure if I could use them in my area. I have always used the romex connector. After doing some research it look like it would’ve been fine. Thanks for watching!
What would be the total recessed lights you will end up with in the kitchen? Will you have any more lighting in the kitchen other than recessed lighting?
The practice of stripping sheathing with a utility knife after inserting it in an enclosure is unsafe, physically and mechanically. Teaching that method is irresponsible!!!
I will be installing the LED trim on these and I will be making a video on it so be sure to subscribe! Timestamps below 👇
How to prepare the recessed lights 01:27
How to wire the recess light (demonstration) 03:04
How to correctly space recessed lights 08:21
How to wire the recess light in the ceiling 13:46
How to properly staple recess light wires 14:37
Final walkthrough of the can light install 14:50
This was some great information. I am a new homeowner and want to make some changes but electrical, gas and plumbing gives me hives...LOL. This video has given a boost of confidence. Thank you for the good content.
I’m glad I could help!
The video gets better along the way. When I thought your were done you keep giving great nuggets i forget about. Thanks again.
Baddest dude on RUclips no doubt.
Awesome video. It only took me about 15 minutes to install my can light.
Thank you for this video. Much clearer than the others I watched. With your explanation of the connectors, I was able to find a loose wire (not fully inserted) that was cutting power to the last three lights on a circuit.
Thanks, for all your info, very helpful
You videos are so clear and concise compared to others I've viewed for these projects. Great work and thanks!
I try to keep all of my videos as informative as possible. The details are very important when it comes to DIY projects. Good luck with your projects!
Nicely explained..... another great video
Thanks Scott!
Thank you for taking the time to put out great content and deliver it in such a clear and simple manner. I can see your channel only growing
Hey Christopher! I try to keep my videos detailed for people that may not be familiar with construction. I appreciate you watching!
Best wishes to you and your loved ones. Appreciate these videos.
Thank you so much. Same to you. Take care!
Short sweet and detailed I like it.
All your videos are great! Thorough information 👍
I appreciate that. I try to make all of my videos comprehensive. Thanks for watching!
Video I was looking for I was stuck on how to space light
Sir you got your self one of these 👍🏻
Thanks a lot! I’m glad I could help you out. I upload 1 to 2 times a week. Stay tuned!
Excellent video, I couldn’t stop myself from subscribing. Thank you for sharing your knowledge and experience
Excellent tutorial 👌
bro teaching is your talent
I appreciate that!
Thank you very much to show the way to install it I didn’t know how and thanks to you I’m going to make it when make a project in my kitchen, excellent video, I will follow your videos to learn more from you
Hey Victor! I appreciate you following my channel. I cover a little bit of everything DIY. Thanks a lot for your comment as well. Stay tuned!
Another great video thanks Josh👍🏻
Thank you and thanks for checking out my video!
Good job 👍
Thank you for that!
FYI you do not need connectors for these cans. You can put your wires in the black slots attached at the ends of the box. You simply open the top/cap and place the wire in the slot. This will save both time and money as you will not have buy and install the connectors.
He does cover that. He says those might not be code in his area, so he's choosing to do what he knows is acceptable.
Love your videos man. So detail and such a humble contractor. Can’t say the same about most others on RUclips.
This comment means a lot to me. I’m so thankful to have subscribers like you leave a comment like this. Thanks a lot for watching and good luck on your projects!
Saludos bendiciones Josh muchos calurosos abrazos a la familia desde indianapolis Indiana 🇬🇹🇬🇹🙏. Exelente video
Hey Jonathan! Hope everything‘s going good for you. Hope you found the video helpful. Thanks for watching man!
I'm done with pot lights, canless recessed lighting is the way to go
I have not done the can-less setups because I usually do new construction.
only thing about the can-less ones is you can’t change out the bulb…i’m a Philips Hue guy so the canned version would be my choice as i don’t like to have a lot of different platforms and apps to toggle between…other than that, the can-less ones are quick and easy to install…excellent content btw!
So excited for this video. I’ve been needing it desperately. Thank you!!!!
I’m glad I can help you! That is the goal of my channel. Thanks for watching!
Another great video! I prefer having the kitchen sink light on a separate switch so you don't have to turn on all the kitchen lights just to rinse something off.
Thanks a lot! Yes that’s a good idea to have your sink light on a switch. Appreciate your input!
Very nice 👍
Thanks!
Can you install the new construction mounts in an old house? I only have those and I was wondering if they can be installed on top of the drywall through the attic
I recently installed the very thin, less than an inch, LED recessed lights. Much easier to install than cans. Easy to change color of light. I'll never install the big cans again.
Thanks for the comment!
I just saw that option. How much of a pain is it if it goes out?
Very educational. Great job.
Just great informative videos. Thanks. How do I hang these pot lights when using two layers of drywall on my ceiling?
Great content
Did you put the recess lights on three way switches.?AWESOME AWESOME VIDEOS.
Great video. How many recessed lights could be on one switch box?
The part that you spread up was the part most important to me. I would like to know how you wire multiple can lights from one to the next please?
Pig tail parallel connection
Great video, thanks. How come you don't just use the slim ones that just pops in the drywall. What is the benefit of using the cans in your situation?
I like to use the cans because I use blown in insulation for the attic. With those slim one,if you ever want to change them out insulation would fall down through the hole. With a can installed ,you can switch the trims out without worrying about that. Hope that help!
@@TheExcellentLaborer That makes great sense. Thank you.
thanks
You are welcome!
great vid. Question. I have 4 Halo lights right now and purchased a 6 box set to add more. can I add all 6 for a total of 10 or is there a limit per light switch? Thanks
Thanks
What cans would you recommend for existing ceiling
Will the same can work for cathedral and flat ceilings both?! Thanks
Most the time you can get the wores back putnof the pop in connectors inside the cans you take the connector and pinch it and wiggle it back and forth while pulling and most the times they will come back out. Trust me i learned the hard way lol
great Video. Shouldn't you use the angled recessed light depends on the slope so the light shot straight down? or this looks better? Also how to install these recessed light if the room is already finished? are there different types I can use instead in this case? thanks
If you have cans (recessed) lights in your room and if you have attic space, then you can add another can by doing a remodel can and adding the 14 gauge wire to an existing junction box from a light and yeah. Rest is self explanatory
You don't need romex connectors for those. The black plastic parts are for romex. Just pop it up, slide in the romex and put on the cover.
Lol It appears I commented too early, you did mention those.
Lol I figured you didn’t get to that part yet. I would imagine those are OK to use in my area. I can’t figure out a reason not to. I will ask the inspector to find out. Thanks for checking out my video!
You explain everything very well, i've been watching a lot of your videos. I'm doing some of the work and hiring a contractor for the rest, mainly electrical. I was thinking of doing the new clip in flat LEDs because they come with selectable light value but the contractor is saying to use new construction cans. I keep reading that these new construction cans leak a lot of air, do the ones you used address that? are they newer design or construction?
Hello, i used lithonia spring or clip in flat lights in my basement. They are great and so easy to install. Will be using them in my addition as well.
I wanna install new pot lights and I have a fairly good experience doing so in a new build, however, I am now trying to upgrade an existing room and not sure what would be the best way to run the wires. The room has two light fixtures in the ceiling obviously with own junction box for each. Each light fixture is controlled by a separate switch in that room while one of them is also controlled by another switch neat the stairs. I am also installing a dimmer switch with the pot lights. What's the best way to do it? Shall I connect all pot lights to the junction box controlled by the 3-way switch and completely cancel the other light switch/junction box in the room or split the pot lights in half, one half connected to one junction box and the other half to the other? Would that be weird or unprofessional to have to light up half of that room with one switch and the other half with another? Are pot lights supposed to light up all together in a given room or is it ok to split them between two switches. Moreover, if I did that then the dimmer switch can only control half of the lights and not all. Shall I install another dimmer switch for the other half of the pot lights and have each half function independently? I feel like it's gonna be unprofessional and maybe also annoying while trying to match the dim level on each switch. What do home renovators do in this case, do they cancel one light switch and it's junction box and just connect all pot lights to the existing 3-way switch and install the dimmer switch there?
Thank you so much in advance.
Hi there ,can those cans use led lights and how would install on sloped ceiling ? thank you
Yes that finished ceiling is now complete. Halo sells trim kits that fit right into the housing. They work great on slope ceilings or flat ceilings. Hope that helps!
@@TheExcellentLaborer thank you
When running from one light to the other can you branch off and power more than one light or can you only do 1 in and 1 out?
Hello I live in a old apartment in nyc and the switches is set up using the end of run single pole switch, can I use this method to install 6 recessed light
Can you talk about 15 amp vs 20 amp lighting circuts? Do you use 20 amp just for more lights on one circut?
What led trim did you end up using? I’m looking through everything trying to find them. Thanks
I got the halo led trims that let you select the different colors. I believe they are in my Amazon store. I hope that helps!
@@TheExcellentLaborer thank you! I’ll search for them, do they just thread in like regular bulbs but with a cord coming off it? I didn’t seem them in the store.
Hi. Is there any difference between install pot light vs led light, led light seem to be thinner and easy-to-install. Thanks
I prefer pot lights because if I have to replace the recessed light trim I don’t have to worry about the blown in insulation coming down through the hole. So for a new construction job I will always use these pot lights. Thanks for the comment!
I have an old 100YO home and the house only has two wires with no ground how can I install this kind of lights in my place ?
I am curious to know what downlight that was selected for this installation.
I saw this in a Wirecutter article:
High CRI and R9 values: CRI (Color Rendering Index) measures color accuracy relative to incandescent bulbs, or natural daylight. Although LEDs still can’t match incandescent bulbs, which have a CRI of 100, they’ve improved significantly in recent years. A CRI of 80 is now standard for LED bulbs. Higher is better, and great LED bulbs should accurately render colors. Lighting designer Geoff Goral told us that CRI as a metric has come under fire for measuring bulbs based on how well they portray pastel colors (instead of more saturated colors). Some bulbs now also list an R9 value, which indicates how well a bulb depicts red tones (making art, food, and people look better and less washed-out).
Are this snap lock you use 3/8
What LED recessed light are u going to use
How can get to your Amazon store ?
Check the description of the video. I hope that helps!
❤❤❤❤❤❤❤❤❤
Do have a video we’re you install the lights
Pre strip your romex before you put it into your can, leave a slight service loop for adjustment reasons, 15 amp circuit for the love of god and make all your electrical work look like a work of art. Craftsmanship is key. I don’t like crooked runs of romex. Speed and efficiency. Find a balance
Hes not doing this for you, so each his own.
This has to be in Texas. No pipes?
Where can I get the connector
I think you should really change your lighting wire to 14/2 tbh and have them on a seperate breaker its a lot better
I think you need a minimum of 6 8nches of single conductor in the box
Does anyone else find the traditional advice of "ceiling height ÷ 2" for spacing to be incredible overkill? I've done a couple of rooms with recessed lights, and this advice would've required an insane number of lights and would've looked kinda insane. I've found anywhere between 75%-90% of ceiling height for spacing is as bright as I could ever want, and feels like much more normal spacing. Then, whatever spacing I used between lights, I do about half that between light and wall.
Why do you use the pot lights instead of the wafer lights? Serious question.
I do blown in insulation. When I have to switch out wait for lights insulation wants to fall down. So I just stick with the pot lights. Hope that helps!
Всё хорошо. Но почему верхнюю изоляцию снимают ножом? Неужели нет другого более безопасного для проводов инструмента? Или такое допускается?
It’s not impossible to get the wires out it’s actually pretty easy. Just wiggle them
Why not just use the LED ultra thins? They don’t need the bulky can. Just cut a hole in the ceiling.
I just like the idea of if I want to change out to a different trim I don’t have to worry about blown in insulation coming down on me. Good question though!
You could have used those black clips made for wire,and saved time and material.
Yes that is possible. I wasn’t sure if I could use them in my area. I have always used the romex connector. After doing some research it look like it would’ve been fine. Thanks for watching!
Are you hiring 😂
Not right now lol
What would be the total recessed lights you will end up with in the kitchen? Will you have any more lighting in the kitchen other than recessed lighting?
If I remember correctly I believe it was eight in that kitchen. I will have a island light over the 4 x 8 island. Hope that helps!
feet! not foot! feet! the south lost the war, now you all need to speak English! hahah jk but seriously, thanks for the video lol
Once again there is not 6 " of free conductor in the box. Code violation
The practice of stripping sheathing with a utility knife after inserting it in an enclosure is unsafe, physically and mechanically. Teaching that method is irresponsible!!!
Why not just use the LED ultra thins? They don’t need the bulky can. Just cut a hole in the ceiling.