Surprised you were able to fit the big tip on the body line , a lot of those upper body line have bracing that make it nearly impossible to get a soft tip tool on them specially above the body line. Excellent work man 💪
I remember when I first heard about this type of body work repair years ago. I don’t remember what year it was but a car magazine had mentioned it. They found it amazing that metal tools could be used to remove dents. It has come a long ways.
Just subscribed wish we could see a review on your tools you use . maybe a link or two to see where you purchased them I got an old Chevy S10 4 door pretty hard to come by body parts even in the junkyard got a passenger side door needs fixing . I'd like to give it a shot please if you can post a video review maybe some of the tools and glue
It looks amazing! But I have a question. Isn’t the metal weakened? If someone leans on that spot wouldn’t it just give in faster? I know people should not lean on it but people lean on cars so…
Yep I know a guy here in Ct Dave Dentworx who’s been doing this for over 20 years he’s good had him pull a big dent out of my roof pillar where There was no way to get behind it very hard to make it look good by most he fixed it perfectly
Now this is what I'd call skilled labor, years to master. Same with welders, masons, mechanics, electricians... basically all trades except service plumbers that use ProPress
wow. this is something that i really want to learn, i went to lattc college for engine performance 3 years i am a mechanic, do you know any school for this in Los Angeles cal. and where can i get the bar you use for this repair,i get in EBAY yeterday but i dont know wich set to buy, thank you very much for share
Став лампу далі, щоб прибрати хвилі на металі. Коли стоїш близько то не видно, але на вулиці, ставши трохи далі буде видно хвилі. А взагалі зроблено гарно.
Was going to use this video before the wife total the car😢😢 thank God she was not hurt😊 2017 Cadillac all-wheel drive luxury turbo 2.0 Maybe😢 I get something with a sunroof this time and learn how to tell the wife know 😊
I got a long small scratch dent where a 17 yr old hit my car at Walmart in a park she came in the park next to me from the opposite direction and went down the side of my car I’ve popped dents out before but I’m going to tackle it myself I gotta get me a long tool to get in that door panel 🤔
Legit question; why risk damaging the window seal and/or window by sliding into the panel, instead of just pulling off the panel? Practically all cars have access holes once you take off the interior panel, it's a 5 minute job to take it off and a 10 minute job to put it back on, which compared to how long it takes to do this amazing work is nothing and well worth it to mitigate risk
dismantling the door would give you more opportunities and several times increase your speed and quality of performance with the least physical exertion
Wow. I would never think that you could repair that damage so well. You are a master of your trade sir!
It's almost an art form. Awesome work
It’s definitely an art form
Dude you're a savage good shit!
One of the best dent techs I've ever seen.
That's like a magic trick! Unbelievably awesome after watching your videos I purchased a kit today😊
Every time I watch one of your videos, I'm more amazed.
Props to you, as usual. But damn i am impressed by modern paintjobs. Did not expect this to come out with the paint still intact.
Wow I been checking out alll your dents videos I’m very impress u do great work i can tell u take pride what u do hands down 🙌🏽👍🏽🫶🏾☝🏽💪🏽
You remind me my work what I did when I was young. You are very professional. I would trust to give you my car to fix👍👍👍👏👏👏👏
Wow!!! Everytime i watch you get better and better. Keep up the good work.
How this door doesn't have upper brace? You are one of the best PDR technicians
Wow never seen this done before pure skill you putting out there man
Surprised you were able to fit the big tip on the body line , a lot of those upper body line have bracing that make it nearly impossible to get a soft tip tool on them specially above the body line. Excellent work man 💪
I remember when I first heard about this type of body work repair years ago. I don’t remember what year it was but a car magazine had mentioned it. They found it amazing that metal tools could be used to remove dents. It has come a long ways.
Thank you for sharing such beautiful skills. All the best brother Great great work
As a body man I’m impressed. Wondering how long did that take?
We need him in California. Great work.
Damn! You're a sculpting genius.
You are a master at work . Awesome man!
What a nice video!! Finally I got the perfect answer🎉
You did a great job and you made it look so easy period where are you located at?
Excellent job Young Man!
I was wondering how you keep from scratching up glass👍👍👍
With skills like that, you are undoubtedly writing your own success.
I love the access at the top of those doors
Just subscribed wish we could see a review on your tools you use . maybe a link or two to see where you purchased them I got an old Chevy S10 4 door pretty hard to come by body parts even in the junkyard got a passenger side door needs fixing . I'd like to give it a shot please if you can post a video review maybe some of the tools and glue
It looks amazing! But I have a question. Isn’t the metal weakened? If someone leans on that spot wouldn’t it just give in faster? I know people should not lean on it but people lean on cars so…
You should include prices. Makes it much more interesting
Great job and way better than messing with factory paint
Yep I know a guy here in Ct Dave Dentworx who’s been doing this for over 20 years he’s good had him pull a big dent out of my roof pillar where
There was no way to get behind it very hard to make it look good by most he fixed it perfectly
Gotta love to hear that sound! POP
Now this is what I'd call skilled labor, years to master. Same with welders, masons, mechanics, electricians... basically all trades except service plumbers that use ProPress
💥💥💥 GREAT JOB!!
Simply amazing talent🎉👍
what is that board piece called used to protect the glass? Is it difficult to fit that tool in the space ?
You are the master..👍👍👍👍
This man is excellent in his job
Where do you get all your equipment if you don't mind me asking?
Man you are a champion!
You are a artist
JESUS CHRIST
Every video is just brilliant
wow. this is something that i really want to learn, i went to lattc college for engine performance 3 years i am a mechanic, do you know any school for this in Los Angeles cal. and where can i get the bar you use for this repair,i get in EBAY yeterday but i dont know wich set to buy, thank you very much for share
Супер. Молодець. Як для мене тяжка робота.
That's awesome bro. Did you take a course to learn this?
Obviously a good amount must have been experience but I mean in the beginning
Good stuff man how long was the process?
The talent is fkn amazing. I have no patience I’d make it worse lol
How much does it cost to buy the basic tools and how expensive can this get?
I wish this dude lived by me. My truck got a ton of dints and it kills me every time i look at them
Hi, how are you? Can I buy equipment like this to bring to Indonesia?😊
Bro, give me the name of some of your tools and what are you bottom from? Where can I purchase those tools?
I have same dents but my local dent removal told me to go for collision shop instead😢
Not bad with the fog 👍
Where can I buy these tools? Thanks.
Does anyone know what type of glue he is using? Appreciate you!
What tool are you using to push?
Very nice job 👍
Став лампу далі, щоб прибрати хвилі на металі. Коли стоїш близько то не видно, але на вулиці, ставши трохи далі буде видно хвилі. А взагалі зроблено гарно.
A true Profesional. Nowadays all they want to do is replace.
Fantastic Job you have done 👍👍😃😃
Was going to use this video before the wife total the car😢😢 thank God she was not hurt😊 2017 Cadillac all-wheel drive luxury turbo 2.0 Maybe😢 I get something with a sunroof this time and learn how to tell the wife know 😊
I got a long small scratch dent where a 17 yr old hit my car at Walmart in a park she came in the park next to me from the opposite direction and went down the side of my car I’ve popped dents out before but I’m going to tackle it myself I gotta get me a long tool to get in that door panel 🤔
Amazing Bro... aren't the bigger ones are they easier then the tiny tight ones???
Whats that red cherry mallet called?
Legit question; why risk damaging the window seal and/or window by sliding into the panel, instead of just pulling off the panel? Practically all cars have access holes once you take off the interior panel, it's a 5 minute job to take it off and a 10 minute job to put it back on, which compared to how long it takes to do this amazing work is nothing and well worth it to mitigate risk
Perfect job...!
Very nice work ❤
Dude!, fucking FLAWLESS! Amazing work
About how long did it take?
Well done 💪🏽
Will a dent puller work
That pop made me jump I ain’t gon lie haha wasn’t expecting it
Anyone know how much this service would be?
Where you located?
What tools do I need? Any links?
Where are you located.
Where is your business located?
Superb 👍
AMAZING!!
bella verniciatura 👍
Whats the blue plastic sheet you used to protect the glass ?
its called a PDR board for doors
How much would a repair like this cost
Very nice!
Hi friend, do you have any video course to offer for us who want to learn to work?
Yes sir got to this website. www.elevationdentco.com
out class🎉
Your good😊
Wow that was cool af
Красота ❤😮😅
Where you located
I enjoy your videos significantly more than that superman guy.
Mejor que una película de Hollywood
dismantling the door would give you more opportunities and several times increase your speed and quality of performance with the least physical exertion
No sir lol
That’s to me it’s amazing
Makes it look easy 😂
Like a magician
Nice!
Attempt??? Brother, you did it.
sick dude.....
🙌🏽
Perfect.
Bro how? That's amazing! I'm convinced you're doing witchcraft. Lol
Very impressive