AutoCAD TOOL PALETTES | CUSTOMIZING AUTOCAD TOOL PALETTES

Поделиться
HTML-код
  • Опубликовано: 8 дек 2024

Комментарии • 153

  • @aniruddhakolhatkar7894
    @aniruddhakolhatkar7894 8 дней назад +1

    Never used the palletes before. This video has taught me something new and useful. Thank you!

    • @sabeercad
      @sabeercad  7 дней назад

      Glad that it helped 👍🏻

  • @towTruck42
    @towTruck42 5 лет назад +4

    fURNITURE. Love it. Some teachers make you wait while they correct that stuff but you're really getting to the point here without trying to humor your audience. Thank you.

    • @sabeercad
      @sabeercad  4 года назад +1

      You are most welcome 😊👍

  • @adrianalpino2282
    @adrianalpino2282 4 года назад +1

    Just what I wanted, fast, direct to the point but also clear and complete. Thank you.

  • @donaldcharles1535
    @donaldcharles1535 5 лет назад +2

    Thank very much sir , for sharing your knowledge of autocad software with the world . I have learnt so much from you. Best autocad tutor on RUclips. THANK YOU!!!.

    • @sabeercad
      @sabeercad  5 лет назад

      You are most welcome 😍 Best wishes 😊👍

  • @75blackviking
    @75blackviking 5 лет назад +2

    Thanks again, Sabeer! This should make organizing my work far easier.

  • @herbertfranco1993
    @herbertfranco1993 8 лет назад +1

    sir every time I watch your video I amaze again thank you very much.

    • @sabeercad
      @sabeercad  8 лет назад

      +Herbert Franco You are most welcome :)

  • @revivetechnical7045
    @revivetechnical7045 6 лет назад +1

    Thanks. Thanks. Thanks. I have no words to express my happiness. God Bless

  • @pathroses3522
    @pathroses3522 8 лет назад +1

    Hello Mr. Sabeer,
    Your video and instruction step by step is simple & great anyone can grasp easily. I try to create the palette Group as per your video instructions and I done it. When I am Click & Drag the blocks to the 'Blocks Tab' the object is not leaving in the Tab. Could you tell me why I am not able to create?
    Thanks & Regards

    • @LazyArquitecto
      @LazyArquitecto 5 лет назад

      Pathrose, you need to save your current drawing first, then drag block to tool palette.

  • @naveenponnam
    @naveenponnam 8 лет назад +1

    Thank you very much Mr. Sabeer. Very useful tips...

  • @m3ghost
    @m3ghost 8 лет назад +3

    Great video, thanks for all the tips! very useful!

    • @sabeercad
      @sabeercad  8 лет назад

      +Mauro Enzo Cardinal You are welcome

  • @samsite5280
    @samsite5280 3 года назад +1

    Jazakallah.May Allah reward you.

  • @arianacervantes1088
    @arianacervantes1088 8 лет назад +1

    Omg thank you so much, this is brilliant, I'll safe so much time, copy and pasting my blocks,

    • @sabeercad
      @sabeercad  8 лет назад

      +Ariana Cervantes That's true . All the best

  • @1203sagar
    @1203sagar 8 лет назад +2

    thanks sir this is very useful to me! for improving of my productivity!!

  • @chill_and_proud
    @chill_and_proud 4 года назад +1

    Hi..new subs here in manila philippines😊😊

  • @Andres9x
    @Andres9x 5 лет назад +2

    Excellent explanation, thank you very much for sharing!

    • @sabeercad
      @sabeercad  5 лет назад

      You are most welcome 😊

  • @allanmhango7527
    @allanmhango7527 2 года назад

    Thanks Sabeer for this info.

  • @242215Hilton
    @242215Hilton 5 лет назад +1

    I need to know if its possible to record a tool pallete tab displacement to use in more than one version of Autocad.
    Thank you very much for the explanation!

    • @sabeercad
      @sabeercad  5 лет назад

      Yes , you can export and import tools palettes

  • @狼-n7s
    @狼-n7s 4 года назад +1

    Thanks for a wonderful video. Do you have any tutorials on attributes, inserting the tables and civil engineering drawings. Will appreciate if you could provide their links.
    Regards
    Faisal, UK

    • @sabeercad
      @sabeercad  4 года назад +1

      Hi Faisal.. I have a full fledged online course for Civil Engineers in AutoCAD in which all these details are dealt with in Detail. Feel free to whatsapp me in +919895835350 to know more.

    • @狼-n7s
      @狼-n7s 4 года назад

      @@sabeercad Thanks. I'll get in touch with you soon.

  • @insanekidish
    @insanekidish 8 лет назад +1

    How did you maintained the original block color when in tool palette?

    • @LazyArquitecto
      @LazyArquitecto 5 лет назад

      Insanekidish, left click on block from tool palette and pick properties, then pick desire layer and color

  • @danstevens64
    @danstevens64 2 года назад

    Sabeer, thanks for the video. What are your recommendations for managing a block library when using tool palettes that must be shared with other people in my office? For example, would it be best to place all blocks into a single DWG file and then just drag and drop from that DWG into my custom tool palette? What if I need to add/edit a block? Go back to that DWG and add it to my tool palette? There doesnt seem to be a video on RUclips about this problem.

  • @vinodkumar-cu1kz
    @vinodkumar-cu1kz 3 года назад

    Really a good explaination.very impressed.

  • @ivosaraceni6881
    @ivosaraceni6881 5 лет назад +1

    excellent video, you won a new subcritor here, thank you very much!

    • @sabeercad
      @sabeercad  4 года назад

      Thank you ! Best wishes 😊👍

  • @ahmedmustafa4931
    @ahmedmustafa4931 4 года назад

    IT IS JUST A LECTURE . THANK YOU.

  • @jackfrost2853
    @jackfrost2853 4 года назад +1

    Thank you very much. Very useful video .

    • @sabeercad
      @sabeercad  4 года назад

      You are welcome 👍

  • @tariqhameed5207
    @tariqhameed5207 4 года назад +1

    Excellent sabeer

  • @BD-hy8bl
    @BD-hy8bl 6 лет назад +1

    Greatly explained. Thank You.

  • @TheSunshine123flower
    @TheSunshine123flower 7 лет назад

    thank you! This was pretty straightforward

  • @kusumapappala9001
    @kusumapappala9001 3 года назад +1

    Which tool palette contain logic symbols??

  • @munaaljonaidy571
    @munaaljonaidy571 8 лет назад +1

    thanks for this informative well-organized presentation

    • @sabeercad
      @sabeercad  8 лет назад +1

      Thanks .Recommend my channel to your friends and tell them to Subscribe to it

  • @sandro0o00
    @sandro0o00 8 лет назад +1

    Thank You very much, you help me a lot,very productive totorial.

  • @haoyue4972
    @haoyue4972 3 года назад

    Is there a way to modify those multi-view blocks without changing the original ones in the content browser?

  • @benbax5990
    @benbax5990 8 лет назад

    Good work.... Thanx.... Hopefully you´ll post more...

  • @umarmustafa6521
    @umarmustafa6521 8 лет назад

    wow its very useful and make work easy ...thanks alot

  • @isaacyaw7931
    @isaacyaw7931 Год назад

    GREAT video great info

  • @mstounsi
    @mstounsi 8 лет назад

    Great tutorials. Thank you!

  • @urawesome4670
    @urawesome4670 6 лет назад +2

    What is shown in the video is one way to set up a tool palette. There are better ways, such as using macros (in case IT adds a new server, can update their tool palette with one line rather than every single icon which is what would have to be done the method shown in this video). By using macros it also gives you more options with your buttons such as temporary snaps, rotations, automatic insertions, and you can use scripts, lisp routines by using macros. Also using batch script files makes it easier for sharing palettes. I have yet to see a RUclips video showing any of what I mentioned ha.

    • @sabeercad
      @sabeercad  6 лет назад +1

      Your suggestions are good 👍 But these topics are relatively advanced . Generally in RUclips there is always great demand for Basic tutorials. Even if this is the case , I have plans to post such types of videos...

    • @kriminiminalis
      @kriminiminalis 5 лет назад +1

      @@sabeercad Please make that video my friend!

    • @LazyArquitecto
      @LazyArquitecto 5 лет назад

      @@kriminiminalis video you asked for was released!

  • @piyushagarwal1892
    @piyushagarwal1892 5 лет назад +1

    When I click on tool palette...no palette is shown... it is completely empty...like in your case mech,civil etc...nothing is showing here it just says make new palette...what can I do?

  • @mohammadkashif1949
    @mohammadkashif1949 5 лет назад +1

    Sir auto cad software ke liye kon sa laptop sahi hai uski ram kitni honi chahiye i3 ya i5
    main auto cad architecture karna chahta hu

    • @sabeercad
      @sabeercad  5 лет назад +1

      i5 Sahi hai . Mein iske bare mein ek video Banoonga

  • @tariqhameed5207
    @tariqhameed5207 4 года назад +2

    I m impressed

  • @134169
    @134169 8 лет назад +1

    dear,
    How can I get useful TP for electrical drawing? Could you please help me?

    • @sabeercad
      @sabeercad  8 лет назад

      Will post tutorial on that soon

  • @serbulentbuyukbas1789
    @serbulentbuyukbas1789 7 лет назад +1

    thank you. it's a very useful video.

    • @sabeercad
      @sabeercad  7 лет назад

      +serbulent buyukbas You are most welcome

  • @dianematheresemalvarosa5605
    @dianematheresemalvarosa5605 5 лет назад +1

    Hi. I would like to know how to add a group of commands to be placed in the tool palettes. Can you help me with that, Sir? Thank you.

    • @sabeercad
      @sabeercad  5 лет назад +1

      I have made a video on this Topic . Please watch ruclips.net/video/8TU2n5poRoM/видео.html

  • @ashutoshsharma3884
    @ashutoshsharma3884 6 лет назад +1

    Mr.Sabeer I am trying to click on insert tab in auto cadd software there is no tool objects like that . please tell how can I access them?

    • @sabeercad
      @sabeercad  6 лет назад

      Check the view tab for tool palettes. Or press Control + 3 key simultaneously

  • @altafmubarak
    @altafmubarak 2 года назад

    Can i please know where i can get those ready palettes ?

  • @insanekidish
    @insanekidish 8 лет назад

    Is there any way to create a custom PULL DOWN MENU containing just the custom blocks that i made?

  • @nyseanoctay8609
    @nyseanoctay8609 4 года назад

    Can you please help me out sir...i am using AUTODESK AUTOCAD 2018 but when i press TP tool pallets the pallet boxes are empty no readymade from them

  • @muizzsayyad.1278
    @muizzsayyad.1278 4 года назад +1

    What is the difference between design center and tool pallete??

    • @sabeercad
      @sabeercad  4 года назад +1

      Design Center and tool palettes can be used for some common applications like storing and reusing blocks. But if you want to get the complete differences you have to refer corresponding tutorials.

    • @muizzsayyad.1278
      @muizzsayyad.1278 4 года назад

      @@sabeercad i will surely check. But most of the things you explained in various videos have helped me a lot.
      Thank you for your time and knowledge.

  • @thuynguyen-xg1lj
    @thuynguyen-xg1lj 7 лет назад +1

    Excuse me! I had a problem with block. When I edit in the block and I had changed something but the drawing was lag and closed. Then I open it but it in the block and i can't see "close block editor" to exit and back to the first drawing. Can you help me, plz? Thank you so much!

    • @sabeercad
      @sabeercad  7 лет назад

      +thuy nguyen Just try BCLOSE command

    • @thuynguyen-xg1lj
      @thuynguyen-xg1lj 7 лет назад

      I tried and failed. Thanks a lot!

  • @justourbina12
    @justourbina12 8 лет назад

    Hi, i've been watching your videos which are very informative. I have learned a lot, however i just want to ask you, if you can make a video on how to add parts list onto a title block with some assembly parts and balloons in Autocad 2016, thanks. I am currently using Fusion 360 which has an easy parts list option, but in Autocad there is more customization.

  • @er.meetshah2932
    @er.meetshah2932 6 лет назад +1

    In my pc folder 📁 doesn't generates ND i can't show saved pellets as pictures

    • @sabeercad
      @sabeercad  6 лет назад

      You can reset the software and retry

  • @urvimarathe637
    @urvimarathe637 6 лет назад +1

    Sir I can't move object to pallet...error is coming block is not found in source drawing.If the source drawing is currently open in the editor pls save your drawing..what is reason?

    • @LazyArquitecto
      @LazyArquitecto 5 лет назад

      Urvi, You need to save your drawing first, then drag block to tool palette

  • @AkbarBasha-ff9vf
    @AkbarBasha-ff9vf 7 лет назад +1

    i added blocks successfully but i am not able to insert it. when i am doing drag and drop it is showing 0with cross line. please help

    • @LazyArquitecto
      @LazyArquitecto 5 лет назад

      Akbar, you need to restore autocad to fix palette functionality

  • @ilayarajaraphael6829
    @ilayarajaraphael6829 9 лет назад

    Super sir
    i didn't forget you sir.

  • @divyam5520
    @divyam5520 6 лет назад +1

    Hi. in autocad 2010, i am not able to drag blocks from tool palette. I did create my own palette but they dont show up on my drawing file when i drag them on the screen. Help!

    • @sabeercad
      @sabeercad  6 лет назад

      You can use Autocad Design Center to store blocks to tool palettes and try

  • @shabirahmad-nd6ox
    @shabirahmad-nd6ox 7 лет назад +3

    sir my block are not showing on the tool pelettes screen when i drags them

    • @sabeercad
      @sabeercad  7 лет назад +1

      +shabir ahmad I will post a video on this procedure very soon ..

    • @shabirahmad-nd6ox
      @shabirahmad-nd6ox 7 лет назад +1

      thanks sir

  • @mskureshi8432
    @mskureshi8432 7 лет назад

    very good lesson

  • @kpsharma61
    @kpsharma61 8 лет назад +1

    very nice Sir

  • @GitikaMandloi
    @GitikaMandloi 8 лет назад

    i am a student of ur autocad tutorial...
    sir i m facing problem in tool palette ....about resizing the objects
    like tree ,, door .... w.c. ...etc
    how to resize the object...??? plz tell me...
    & if i click on the palm tree .... the it is not a single entity ,,,,
    the i blocked it ...the it becomes the single entity ,,,,
    but in my past drawing when i select the the tree.... then it was a
    single entity ....
    sir plz help me about it

    • @sabeercad
      @sabeercad  8 лет назад

      Just see whether the explode option is active in the insert dialogue box. To scale an object , you can right click on the block , go to properties and provide a scale factor . After you inserted , if you want to scale it , you can very well use SCALE command

    • @GitikaMandloi
      @GitikaMandloi 8 лет назад

      +sabeercad thanku sir

  • @cristinaaruncutean8555
    @cristinaaruncutean8555 8 лет назад +1

    Hy, in my autocad 2017, I cant see those blue squarea ( meening the edges and the middddle poiint ), like you have in minute 7.02, so does anybody knows how to activate that? Also , in my 2007 autoca, when I had my cusors over an end of a line or rectangle, the autocad showed me automatically the lencht of the objesct, but this new autocad, do not do this, so, does anybody knowe how to activate this? thank you :)

    • @sabeercad
      @sabeercad  8 лет назад +1

      Right click on the screen , Click on OPTIONS , click on Selections TAB and and activate SHOW GRIPS

    • @cristinaaruncutean8555
      @cristinaaruncutean8555 8 лет назад

      it worked, thank you very much :)

  • @himodesweet6726
    @himodesweet6726 4 года назад +1

    you are great

  • @sharoowinner4190
    @sharoowinner4190 Год назад

    thanks for the video

  • @eduardohenriquebr1
    @eduardohenriquebr1 5 лет назад +1

    thank you

  • @mukiibipeter07
    @mukiibipeter07 4 года назад +1

    What about dynamics? Thx anyway

  • @nkemathanas7700
    @nkemathanas7700 4 года назад

    Can some one add 3d object in to tool palettes

  • @salifdiallo4627
    @salifdiallo4627 6 лет назад +1

    Thanks a lot

  • @kpsharma61
    @kpsharma61 7 лет назад

    3D BLOCK'S ARE SHOWINGON on the tool pelettes screen when i drags them

  • @aakashmalik5194
    @aakashmalik5194 7 лет назад

    can i do AutoCad course after 10th class or 12th from Arts. please Answer me sir. and suggest me some good Institute. please answer as soon as possible 😥😥

    • @sabeercad
      @sabeercad  7 лет назад

      You can do an Online course which deals with Autocad 2d and 3d . I will send you the link soon .

    • @aakashmalik5194
      @aakashmalik5194 7 лет назад

      sabeercad after this online course, is there any chance for placement. i am already in Saudi Arabia. after 10 days im coming back to india.

    • @sabeercad
      @sabeercad  7 лет назад

      Aakash Singhal once you complete the course , there are more chances for you to get a Job .

    • @aakashmalik5194
      @aakashmalik5194 7 лет назад

      sabeercad ok thanks sir. how much it cost and time duration of the course ??

  • @moincad
    @moincad 4 года назад +1

    Nice

  • @kamalhossain2211
    @kamalhossain2211 9 лет назад +1

    thank you sir

  • @ahmedsayeed441
    @ahmedsayeed441 6 лет назад +1

    Thanks

  • @priyankarathor3146
    @priyankarathor3146 8 лет назад +1

    thanks for guide

    • @sabeercad
      @sabeercad  8 лет назад

      +Priyanka Rathor you are welcome . You can Visit and Enroll at htt://sabeercad.teachable.com for 3D visualization . All the best ... :)

  • @ouness
    @ouness 3 года назад

    can someone pls help me. I can't find the tool pallets on autocad for mac, tp command doesn't work!!

  • @ranjithkumark3080
    @ranjithkumark3080 6 лет назад +1

    How to apply render in building interior design

    • @sabeercad
      @sabeercad  6 лет назад

      Keep a Camera inside the Interior . Then render. Will post a video on this soon ...

  • @swamynaidugalidevara
    @swamynaidugalidevara 7 лет назад +1

    thank you sir for your clear explanation

    • @sabeercad
      @sabeercad  7 лет назад

      +Swamy Naidu You are most welcome ☺

  • @pasalapavankumar4160
    @pasalapavankumar4160 9 лет назад +1

    nice sir

  • @sygod35
    @sygod35 9 лет назад +1

    nice

  • @ehsanraza5793
    @ehsanraza5793 4 года назад

    Love love love u

  • @Vinodkumar-tl9zu
    @Vinodkumar-tl9zu 8 лет назад

    i want to setup of Autocad plz...

    • @sabeercad
      @sabeercad  8 лет назад

      Run the setup file , provide serial number and code ...

  • @user-se8st1og4c
    @user-se8st1og4c 9 лет назад

    sr i want 3d max tutorials .... if you uplode i shell be very thankful to you

  • @mohammedumair8785
    @mohammedumair8785 3 года назад

    Wavooo wavooo... Good...

  • @basantbasant8299
    @basantbasant8299 8 лет назад

    SIR PLEASE ADVICE ME HOW TO MAKE A OWN MEATERIAL IN AUTOCAD 2014

  • @samsyam9484
    @samsyam9484 6 лет назад

    Good

  • @user-tq1vy8tu8e
    @user-tq1vy8tu8e 3 года назад

    It is not shown with me!!

  • @osmangonymollah5079
    @osmangonymollah5079 6 лет назад +1

    osam

  • @gabrielbarile73
    @gabrielbarile73 8 лет назад +3

    Damn, I lost my life drawing this shit!

    • @sabeercad
      @sabeercad  8 лет назад

      Then please don't spoil your life ... LOL

  • @bafreenshwan6888
    @bafreenshwan6888 5 лет назад

    1000000000000000000000000000000 LIKES.

  • @bhimkavyan2360
    @bhimkavyan2360 3 года назад +1

    Please request Hindi conversation this video

    • @sabeercad
      @sabeercad  3 года назад

      I am not very good at Hindi

  • @munaaljonaidy571
    @munaaljonaidy571 8 лет назад

    :-)

  • @mstounsi
    @mstounsi 8 лет назад

    Great tutorials. Thank you!

    • @sabeercad
      @sabeercad  8 лет назад

      +Mohamed Tounsi You are most welcome :)